Metra 95-6524B Dash Kit

Fit good, worked as intended

Have questions for
?

Metra 95-6524B Dash Kit

perfect fit

Have questions for
?

Does not fit

Just purchased this dash kit to replace my stereo with the Kenwood DMX4707S. Glad I checked the fit before trying to install it. It doesn't fit over the faceplate. I really don't want to have to trim off pieces to make it fit. I'm hoping that there's a replacement that actually fits.

Have questions for
?

Metra 95-6524B Dash Kit

Fit perfect

Have questions for
?

Metra 95-6524B Dash Kit

Great fit. Only problem was they moved the lighter socket to opposite site which put a strain on wire to reach it. Everything else snapped in place with no problem

Have questions for
?

J. Schoger

Radio opening was not wide enough for the DUAL radio and had to be cut and filed in the right and left.

Have questions for
?

Jeep Dash Kit

Fit perfect made the job very simple!!!

Have questions for
?

Shouldn't have to trim a new part to make things fit.

Made to fit Jeep Liberty perfect, but could not fit the stereo size it was designed for. Double Din standard is 100x180mm and this comes in at 100x177 which means my Pioneer deck would not fit without trimming it. Poor design, can't believe Crutchfield still offers it. Their service was great in trying a second one to see if there was any difference, but Metra needs do better.

Have questions for
?

Metra 95-6524B Dash Kit

This is certainly a well thought out product that complements the double DIN unit that I installed. The black, mat finish was great. I thought it might show up finger oils, but it didn't. It used the four factory clips and matched the opening just like the factory bezel.

Have questions for
?

Metra 95-6524B Dash Kit

Great fit

Have questions for
?

Stereo and dash kit

I had to trim one side about 1/8 in for the stereo 2din To fit. I bought the stereo from you guys and dash kit. When done it looks pretty good.

Have questions for
?

Metra 95-6524B Dash Kit

there is a significant gap around the face of the radio and the opening in the dash panel. I would have expected either a more precise fit, or some type of rubber filler

Have questions for
?

2095 Jeep Liberty upgrade to Double Din.

The dash kit provides a nice looking install. I was concerned that the opening appeared too large from to to bottom for the Sony 6.2" screen. Advisor said it should work fine so I went ahead with the install and it looks great. THere is about a 1/4" gap at the bottom but it looks good and is not visible unless you are in floorboard looking up. This dash kit switched the 12 v adapter from right to the left which is not an issue. There is suppose to be on screw on bottom center but the dash kit does not have a hole. I left the screw out and it works fine.

Have questions for
?

Worth it

Very good kit. You have to play with the brackets a little to get it adjusted to fit just right. Instructions are decent, although a little vague on where to cut the piece of the dash to get the DIN unit to fit. All in all a very nice kit that makes the job complete.

Have questions for
?

The only real choice for this generation Liberty.

This is probably the best of the limited choices for the Liberty. With that said there are a number of caveats to the kit. As other reviews have noted it does not properly fit some double din radios (it's about 1/8th too narrow). Be prepared to modify the kit to compensate. It also swaps the accessory outlet from the right to left hand side. The Plastic however appears to be good quality and should hold up well.

Have questions for
?

Metra 95-6524B Dash Kit

Bought for 2005 Jeep liberty, did not have hole for bottom screw. Area where lighter is was considerably smaller than stock. Seems to be very flexible and not brittle plastic.

Have questions for
?

Metra 95-6524B Dash Kit

After receiving the kit I noticed that the cigg lighter/ACC hole was on the opposite side as the original, it turned out that this was not a problem as the wiring reached the opposite side easily. Fitting at the top took a bit of filing the plastic on the sides of the square display hole as the lip going aft prevented it from snapping into place flush, once that was accomplished it fit great and looks like a factory installation. Additional cutting was required behind to facilitate the double din in place of the single din but it was plastic and simple and was able to leave enough for ample support. This is the second time I have used their kits and am very pleased with both as they really do make the installation look like factory. So far I did sons 2002 trail blazer and Daughters 2003 Jeep Liberty in the Jensen VX7528 GPS and the Metra kit for each and love em both.

Have questions for
?

Great Product

Everything fit perfectly. I ordered the preconnected wire harness and antenna extension as well. The radio swap took about 20 mins. I would highly recommend using Crutchfield. I know I will in the future.

Have questions for
?

Metra 95-6524B Dash Kit

Great fit got here fast looks good in the dashboard painted it to match the rest of the interior trim

Have questions for
?

Metra 95-6524B Dash Kit

Fit perfectly

Have questions for
?

Metra 95-6524B Dash Kit

This is an OEM fit for my 07 Liberty. Looks great. Required some modification, I also added a Pro-Fit mount for my phone, more mods.

Have questions for
?

Metra 95-6524B Dash Kit

works very well and looks very nice in the car.

Have questions for
?

Metra 95-6524B Dash Kit

Not bad, would be great if it came with the metal clips to hold it in. Had to take them off the old one. Moving the lighter to the other side was a pain as well. Works for its purpose after some slight modifications. Remember save the clips off the old one there are 4.

Have questions for
?

Grest sound

Perfect fit

Have questions for
?

Metra 95-6524B Dash Kit

This was a perfect fit in my 2005 Jeep Liberty. All that was needed to do is put the clips off my old one on it and snap in place

Have questions for
?

Metra 95-6524B Dash Kit

This product fits as it should. Vary easy to install. The aux. power is on the opposite side of panel, but that was not a big deal, because the wording was long enough to reach easily.

Have questions for
?

Metra 95-6524B Dash Kit

Fits right in. Our Liberty had two power plugs and an ashtray insert. This replacement only has one and a tray, so we lost a power plug. Also, it only came in matte black and ours was silver.

Have questions for
?

Metra 95-6524B Dash Kit

There was no mention of the fact that there are two versions of this bezel. One with power jack on the left (bad spot, plugs interfere with 4wd shifter) as shown on the Crutchfield site, and another version, the no ashtray version with the plug on the right.

Have questions for
?

Metra 95-6524B Dash Kit

The panel fit well, had to do some minor cutting behind the panel as instructed to make a double DIN radio fit. The only complaint I have is the plastic pieces that come with the kit that mount to the radio are thick, and the mounting screws that came with the radio were not long enough. I purchased some longer screws to make it work.

Have questions for
?

Good product

Worked fine. Looks good.

Have questions for
?

Metra 95-6524B Dash Kit

Didn't fit. No place for ash tray or extra power outlet that is in my car

Have questions for
?

Metra 95-6524B Dash Kit

Fit and worked perfectly. One thing is you need to remove and use the mounting clips from the original faceplate which is ez.

Have questions for
?

Metra 95-6524B Dash Kit

Tried to install in my 04 jeep liberty with the new stereo. The screws that come with the mount are way too short. Havent been able to find screws that fit yet. Also there is a gap at the top and bottom when the stereo is in. Havent attempted to move the cigarette lighter yet. This cover has it on the opposite side than comes in the 04 liberty. Hopefully its easier to do than it has been to find screws

Have questions for
?

Fit and works

Looks good and it fit well. Nothing to complain about. Just a well molded piece of plastic that served its purpose. For my double din deck I did have to cut into the plastic of the car a little (as directed for a Jeep Liberty). But that depends on the depth and height of the back of the deck and not this.

Have questions for
?

Metra 95-6524B Dash Kit

The car audio system I purchased fit perfectly into my car. Without it I would have never been able to get it in. Appreciated the fact that the website automatically recommended me to get it based on my car.

Have questions for
?

Metra 95-6524B Dash Kit

This is a great dash because it provides a very nice look and it also is very easy to install 100% recommend

Have questions for
?

Perfect Fit.

Just what I needed, but no screws. The screws that came with the radio and it's metal mounting brackets were too short to use with the kit's plastic brackets, which were much thicker.

Have questions for
?

Metra 95-6524B Dash Kit

Good material and fast delivery

Have questions for
?

Fits like a glove

Fits 2005 Jeep Liberty with no modification needed. What else can I say.

Have questions for
?

Fit and looks great!

The bezel fit and looks great. Cutting out the internal plastic shelf for the old radio was not fun.

Have questions for
?

An amazing difference

I was worried about the quality. It was great. The color is black and I had to paint it to match the factory silver. A can silver and a can of clear plastic paint and it painted up perfect. Actually looks better than stock. With a oscillating multi took the plastic cut like butter. The instructions show the first section to cut out but I also had to cut the top support for the vents, remove the metal support for the stock radio and the metal support bracket for the hazards switch. Then getting the stereo at the right depth took 5 or 6 tried to get it to match up. The factory radio mounts are curved and the Metra kit is straight up and down. Then of course the locks have to be broke to get the lighter plug out. Just silicone it into the new face plate. Fit and finish were perfect.

Have questions for
?

Great Product, not for beginners

This Dash kit fit my car like a glove and it added the touch of new that my dashboard needed after years of weathering. The mounting brackets came with two different type of screws and no instructions. The Brackets where strong enough to hold my radio however it was difficult to find the right section of the radio to put the screws.

Have questions for
?

Jeep radio

Awesome product - replaced my radio and the dash kit made it extremely simple

Have questions for
?

Nice Kit Overall, needs extra parts

This kit is a nice kit for the Liberty, but what I found when installing it was an issue that needs to be corrected. The kit tells you to use the screws that come with the receiver to attach the mounting bracket to the receiver housing. That would be great EXECPT the original receiver screws are NOT long enough!! I had to go to The hardware store to get longer screws. Not a big deal, but at the price of this kit you would think that they would have 1.) Tested their product to know that fact. 2.) Included longer screws after having done so. Just an FYI if purchasing this kit to do an install yourself. Again, not a major deal, but a tiny bit more thought that could have gone into the kit to make it perfect. The fit of the faceplate was excellent! The cigarette lighter was the toughest part. Removing it from the old faceplate took some time!!

Have questions for
?

Good, but be gental

Plastic is not durable. When replacing this with the stock trim, be very careful. Once installed, fits OK.

Have questions for
?

Difficult

Product challenging to configure. Also dashboard modifications for 2007 Liberty difficult. Instead, installed double din unit in Patriot. Dashboard modifications much easier. As it seems to be case with Crutchfield default instructions these days, vague and incomplete.

Have questions for
?

Looks nice.

Looks nice, gives the Liberty and updated appearance. I used an Oscillating Multi-Tool with a moon shaped knife blade to make quick work of removing the plastic shelf for the factory radio. Four cuts and a tug with some pliers and it was out in minutes.

Have questions for
?

With modification it fits great

It fits perfectly in my 2004 Jeep liberty sport after some serious cutting to make the radio fit. The cutting was shown in the manual, however even with good sharp tools it took about an hour to cut it. Once that section was removed the rest of the installation was easily assembled back together and looks like a factory job.

Have questions for
?

Good and Bad

So this fits great! it looks like its stock even though its a bit more flimsy. The issue that I really encountered and still worry about is the months that are provided. These mounts are plastic and do not feel secure. Since I don't have any other choice they have to due, but at least it looks great.

Have questions for
?

MyReview

fit perfectly in my 2007 Jeep liberty sport ..just like the factory one it replaced. the power port was on the opposite side, but that had no effect on installation

Have questions for
?