Contact us
Close contact box
Connect ID #
980 004 941 3

Call center hours

Connect ID #
980 004 941 3
Chat
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

We're sorry, chat is not available at this time. Please visit our Support page to find the help you need.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-800-955-9091

Thank you, !
Our conversation will be emailed to
Please enter a question  
Please select an email topic.  

Looking for tech support?
Please call us at 1-800-955-9091

Need help now?
Call an advisor: 1-888-955-6000

Please enter your name.  
Please enter your US phone number.  
Please enter an email.  
Please enter an email.  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Customer Reviews

Metra 95-7521B Dash Kit

Fits 2012-up Mazda 5 vehicles — double-DIN radios

MFR # 95-7521B

Metra 95-7521B Dash Kit

Metra 95-7521B Dash Kit

Fits 2012-up Mazda 5 vehicles — double-DIN radios

MFR # 95-7521B

7 reviews
View this product

Metra 95-7521B Dash Kit

Crutchfield customer from Roanoke, VA on 1/13/2020

2012 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

Fits great, looks factory

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Excellent product

Doug from Bloomington, IN on 1/27/2019

2012 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

Perfect fit, great quality.

Pros:

Cons:

Crutchfield response on
Customer review photo

0 of 0 found this helpful

OK, but needed to be modified to fit my radio

James from Maryville, TN on 2/26/2018

2012 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

Looks good in my Mazda, but I had to really modify the opening to get my Kenwood Excelon DDX6903S.

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Not great but works and looks fine

Bradley from Annapolis, MD on 1/26/2017

2012 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

The Good: The front panel looks good on the radio after the install is done The Bad: The side panels will line up with both the upper and lower screw holes in my vehicle, 2012 Mazda 5. I decided to just use the upper screws to hold in the Pioneer 8200 NEX I used with this kit. To line up the lower holes in the vehicle with the upper ones already secured, I would have to twist the side brackets so badly that it appeared they might break under the stress. Additionally, I have used kits in the past where the side panels screw into the front trim panel securing the whole thing together nicely. The sides and the front on this kit do not connect. Overall if Crutchfield sold something better than this unit I would go with it in a second. However, at the time of writing this review I think this is the only option. So bottom line, this kit works, but be aware of its limitations. (and check if Crutchfield is selling any better alternative)

Pros: The front trim panel looks good.

Cons: The side panels cannot be attached to both the upper and lower screw holes simultaneously in the car (2012 Mazda 5) that the original radio used without stressing the side panels to near breaking. Hence the radio (pioneer 8200 NEX) was only held in by the two upper screws.

Crutchfield response on

0 of 0 found this helpful

Works alright

Dum L. from Holland PA on 5/20/2016

2014 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

Needed this for a double din install, kit comes with clear instructions how to disassemble dash and brackets/bolts as needed. There is no guidance which holes to use with the brackets and it's really a test fit/adjust game to get the right depth set so that the stereo aligns to the face plate with no obvious gaps. The bracket itself did not align with the OEM holes at all, had to "stretch" the bracket to make it work with the mounting holes. The face plate did not snap into the tab holes on all four corners but it held "fine" after the other trim pieces below and above it were in place to give it a bit extra support. The matte finish is low key but was already scuffed somehow out of the bag. We were too many hours into the install to let that bother me at that point. Wish a higher quality kit was available with tighter fitment and better finish.

Pros: cheap, generally fits, comes with dash removal instructions

Cons: fitment is only ok at best, surface is matte and easily scuffs

Crutchfield response on

0 of 0 found this helpful

Worn

Jfun from Georgia on 7/11/2015

Verified customer (What's this?)
Verified employee purchase (What's this?)

Worked perfectly in my 2013 Mazda5. Made my double DIN install a breeze.

Pros: Works perfectly

Cons: None

Crutchfield response on

0 of 0 found this helpful

Good product for Mazda

Mazda 5 install from Sacramento, CA on 6/14/2015

2012 Mazda 5

Verified customer (What's this?)
Verified employee purchase (What's this?)

Nice fit and finish into the Mazda 5. I just wished the stereo brackets were less flimsy

Pros: fit and finish is good

Cons: side brackets seem a little flimsy

Crutchfield response on

0 of 0 found this helpful

TOP