About the Metra 99-2022B Dash and Wiring Kit
A Regal option for your new radio
A Regal option for your new radio
The Metra 99-2022B dash and wiring kit enables you to install a new single-DIN (2" tall) or double-DIN (4" tall) radio in your Buick Regal. This package includes the dash kit to secure the radio, as well as the wiring harness adapter to integrate it to the factory wiring.
Retain your car's features
The wiring connections enable you to keep your factory OnStar, audible safety warning chimes, climate display panel, and provide a 12-volt accessory output connection. If you're adding a new navigation receiver, you'll also appreciate the adapter's included mute, parking brake, Vehicle Speed Signal (V.S.S.), and reverse output connections. If you buy a new radio with a rear aux input, this harness allows you to keep your handy factory aux inputs.
Installation note: This kit will not work with Buick Regal systems equipped with factory navigation or the "push-to-start" system. You'll need to make modifications to your Regal's sub-dash to install a car stereo using this package.
Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle.
- package includes dash adapter, brackets, and wiring harness for installing new car receiver in select Buick Regal models
- provides connections for parking brake, Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers
- works with single-DIN or double-DIN car stereos
- provides 12-volt accessory power connection for new car stereo
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 99-2022B
What's in the box:
- Radio replacement interface module
- Radio/vehicle harness
- Radio housing
- Climate control trim-panel
- Climate control trim-ring
- 2 Brackets
- 6 Screws
- Installation Instructions
Metra 99-2022B Dash and Wiring Kit reviews
Great fit and was able to match the factory gm paint color
0 of 0 found this helpful
More details on the Metra 99-2022B Dash and Wiring Kit
Vehicle Compatibility: This Installation Package (99-2022B) from Metra and Axxess Integrate is designed specifically for 2011-2013 Buick Regals (without factory navigation).
Single- or Double-DIN Kit: The included dash kit (99-2022) supports either Single-DIN or Double-DIN aftermarket head units. A pocket is included for Single-DIN installation; not used for Double-DIN installation. In addition to mounting your aftermarket head unit, the 99-2022 dash kit also trims out your vehicle's factory climate controls. The radio housing is constructed of ABS plastic in a black matte finish. The climate control trim is also constructed of ABS plastic, but finished in gloss black.
Radio Replacement Interface: The included radio replacement interface module (BP-GMOS-044) and vehicle/radio harness works in both amplified and non-amplified systems. The BP-GMOS-044 is designed to retain OnStar and retain warning chimes that are normally lost when the factory radio is removed. It also provides a 12-volt accessory output for aftermarket radio operation. The radio replacement interface module even provides a mute, parking brake, VSS (vehicle speed sense), and a reverse output to make installing an aftermarket navigation radio simpler and less time consuming.
Factory Aux Input Compatible: The included radio replacement interface module and vehicle/radio harness contains stereo male RCA connectors to retain your vehicle's factory Aux input. In order to retain your vehicle's factory Aux input, your aftermarket head unit must have a rear-panel Aux input (male minijack to female stereo RCA adapter may be required, sold separately).
Factory Personalization Menu Retention: If your vehicle provides factory steering wheel controls, then this installation package will still allow you to access the vehicle's factory customization menu through those same steering wheel controls even after the factory radio is replaced by an aftermarket head unit. The factory personalization menu screen can be disconnected if your vehicle does not have factory steering wheel controls. You are also able to adjust the personalization menu before the factory radio removed.
Optional Steering Wheel Control Adapter: Add the Axxess ASWC-1 steering wheel control interface (120ASWC1, sold separately) to retain your vehicle's factory steering wheel controls.
Wire Code Chart: Wiring up this radio replacement interface module (BP-GMOS-044) is like wiring up any other wire harness that would attach to an aftermarket radio's harness. The Metra/EIA wire code can be found in the owner's manual that will aid you in the wiring of your aftermarket radio. The radio replacement's vehicle/radio harness contains the following wire leads.
|Yellow||+12 Volt Constant|
|Red||+12 Volt Accessory|
|Green||Left Rear Speaker +|
|Green/Black||Left Rear Speaker -|
|Violet||Right Rear Speaker +|
|Violet/Black||Right Rear Speaker -|
|Gray||Right Front Speaker +|
|Gray/Black||Right Front Speaker -|
|White||Left Front Speaker +|
|White/Black||Left Front Speaker -|
|Light Green||Parking Brake|
|Blue/Pink||Vehicle Speed Sensor|
|Black/Yellow||OnStar Level Adjustment|
|3.5mm Jack||SWC input for optional ASWC-1interface|