Name: Metra 99-5825 Dash Kit
Brand: Metra
SKU: 120995825S
Price: 89.99 USD
Availability: InStock
Rating: 4.5 (30 reviews)

OVERVIEW

Written by Crutchfield's Jon P.

Your 2011-up Ford Fiesta is a great car, but the design of the stock console makes it impossible to upgrade the factory radio. The Metra 99-5825 dash kit allows you to install an aftermarket DIN-sized (2" tall) receiver in the dash panel without losing access to the heating, ventilation, and air conditioning controls. Available in Black or Silver, this kit is a perfect match for the color, texture, and contours of your Fiesta's dash.

KEEP READING

Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 1 year.

READ LESS

What's in the box:

Metra 99-5825 Dash Kit owner's manual

Radio housing
2 Brackets
Six #8 x 3/8" phillips-head screws
Installation Instructions

MFR #99-5825S

Featured review

Meh again. It fits fine but the bottom is out of skew and there are buttons that aren't needed in my car. It would be nice if you could remove all the extra junk on this.

todd from Lakewood, OH

See all 30 reviews

Customer Q&A

Is the radio once installed angled upwards at all or is it perfectly straight?

It's angled some to fit the dash cavity, just enough so you can see the display with no problem.

12 reasons to shop with us

#10

60-day price protection

If our price drops after you buy, call us.

See all reasons

REVIEWS

Loading reviews...

Metra 99-5825 Dash Kit reviews

Average review:

30 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Verified customer

Verified employee purchase

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

DETAILS

Researched by Crutchfield's Stacey B.

Product Research

Features

Overview: The Metra 99-5825BC OEM Integration Kit allows the replacement of your 2011-up Ford Fiesta's factory radio with an aftermarket head unit. This OEM Integration Kit retains driver information buttons. It's available in either a painted silver or matte black finish to match your dash. Installation will require the XSVI-55424-NAV Ford interface and 40-EU10 antenna adapter (both sold separately).

Note: The unit is shipped programmed for Ford's SYNC system. It must be reprogrammed if used without the SYNC system. (Instructions are in the manual.)

ACCESSORIES

Loading accessories...

Q&A

Q

Crutchfield asked: Why did you buy this?

Best quality and lowest price only at crutchfield! [ Allen Oct 13, 2019 ]

Dexter's advise [ Karl May 25, 2018 ]

Needed [ Julie May 01, 2018 ]

5 questions already asked

Hello, I have the 2014 Ford Fiesta Hatcback w/ Sync. This dash kit looks perfect for my car but when I put that my car has sync, it says "Does not fit your car". But when I put that my vehicle DOESNT have Sync, it says "It fits". I don't really use my the Sync capability so I'm wondering if this would still work for my car without using sync.? Thank you

[ Ronald Feb 12, 2019 ]

2 answers

Hi, I installed this in my 2014 Fiesta also. You will lose Sync capability which is not a great loss as it didn't work very well. Fit is good but lights don't match dash lights

[ David Feb 13, 2019 ]

It should still work, it just doesn't have the technology or adapters to work with Sync. It will fit, you'll just lose the Sync function.

[ Abby Feb 12, 2019 ]

Will there be any chance you Guys will be coming out with a double din option for the 2017 Ford Fiesta se sedan? I can only find a single din

[ Joe Feb 13, 2018 ]

1 answer

Thanks for your question! We (Crutchfield) don't actually manufacture the vehicle-specific dash kits and installation hardware ourselves--so double DIN installation in your '17 Fiesta would require a dash kit manufacturer (such as Metra) to provide a compatible solution. I'm afraid the Metra 99-5825 dash kit (for single DIN installation) is the only option offered for your '17 Fiesta at this time. Please feel free to contact an Advisor directly by phone (888.955.6000) or online chat for more details or to discuss further.

[ Larry Feb 20, 2018 ] Staff

Is the radio once installed angled upwards at all or is it perfectly straight?

[ Joseph Aug 29, 2017 ]

5 answers

Once you get it read the i instructions. Youre gonna have to either use a dremel or a hot razor and cut the sub dash to get it to sit flush its not hard and its not going to be noticible to anyone if you ever try to sell it. But to answer you question it does sit perfectly strait and flush just takes some work

[ cameron Sep 09, 2017 ]

It's angled some to fit the dash cavity, just enough so you can see the display with no problem.

[ neil Aug 30, 2017 ]

It's straight and level

[ Matthew Aug 30, 2017 ]

Yes this type of kit you can put in perfectly straight like original oem radio

[ luis Aug 29, 2017 ]

I purchased this kit then I replaced my factory radio. My new radio is not angled upward at all.

[ Antonese Aug 29, 2017 ]

Is the extra (small) socket on dash kit supposed to remain empty? Or did I lose a wire somewhere?

[ Peter Sep 07, 2015 ]

3 answers

I can not help you I had the radio and dash kit installed for me. I do know that for me the info button does nothing

[ DENNIS Sep 08, 2015 ]

If I remember correctly it is extra. It depends what kind of steering wheel controls you have. There should be the wiring from the radio, steering wheel controls, the screen if you have one, and then the airbags. I would call the crutchfield tech support they are really great.

[ DAVID L Sep 08, 2015 ]

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

[ Krissy Sep 08, 2015 ] Staff

How do you reset the clock and access the system menu without SYNC enabled? Holding MENU doesn't seem to do anything.

[ Brandon Sep 27, 2017 ]

1 answer

The car needs to be on for the menu Button to work. if you click the button right under the menu button you will also gain access to the One Hour mode. I haven't timed it to see if it'll actually turn off after an hour yet , so be cautious if you use this feature.

[ Ernesto A. Sep 27, 2017 ]

SHOW MORESHOW LESS

ARTICLES

Loading articles...

Best picks

Buying guides

How-to guides

Research Garage

All finished with your chat session?

Thank you. You are in line to receive a call from .

It's your turn. will be calling you shortly at .

Sorry, the call-back feature is currently unavailable.

Your Advisor

Metra 99-5825 Dash Kit

Install a new single-DIN car stereo in a 2011-Up Ford Fiesta (Silver)

Does it Fit your car?

Find what Fits your car

Other options

Additional items are required:

Selected Location

About the Metra 99-5825 Dash Kit

What's in the box:

Featured review

Customer Q&A

12 reasons to shop with us

Customer reviews

Metra 99-5825 Dash Kit reviews

Thanks for submitting your review

Review the Metra 99-5825 Dash Kit

Your Review

Additional Fields

Filter by rating

Customer photos

More details on the Metra 99-5825 Dash Kit

Product Research

Features