About the Metra 99-7384B Dash and Wiring Kit
Keep your factory features
Keep your factory features
The Metra 99-7384B dash and wiring kit allows you to install and connect a new single-DIN (2" tall) or double-DIN (4" tall) aftermarket stereo in your Kia's dash opening while maintaining your vehicle's steering wheel audio controls, climate display, auxiliary input, and rear-view camera (if present).
The included Axxess ASWC-1 module retains your steering wheel audio controls, while the AX-CAM6V adapter supplies the 6-volt power you'll need for your Kia's rear-view camera. The included wiring harness retains your 12-volt auxiliary power, and also supplies the speed sense output you'll need to connect a navigation receiver.
Factory fit and finish
The dash kit features a black and gray painted finish that matches your Kia's dash. The package also includes a replacement climate control display panel that shows you fan speed, mode, and temperature.
Note: This kit is designed for Optimas with automatic climate control and without a Kia amplifier. The radio trim panel in these vehicles is difficult to remove, so it's important to follow removal instructions carefully.
- install a new single- or double-DIN car stereo and retain your vehicle's factory features
- package includes dash kit, wiring harness, antenna adapter, ASWC-1 module, AX-CAM6V adapter
- retains the use of your steering wheel audio controls and auxiliary input
- retains rear-view camera (if present)
- includes a climate display for fan speed, mode, and temperature
- provides speed sense connection for navigation receivers
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 99-7384B
What's in the box:
- Radio trim-panel
- 2 Brackets
- Climate display
- ASWC-1 interface module
- LD-OPTI2 harness
- LD-OPTI1 harness
- Camera harness
- Speaker harness
- 12V-to-6V camera step-down converter
- Antenna adapter
- SWC adapter harness
- 2 Screws
- 2 Clips
- Installation Instructions
Metra 99-7384B Dash and Wiring Kit reviews
Thanks for submitting your review
More details on the Metra 99-7384B Dash and Wiring Kit
Vehicle Compatibility: The Metra 99-7384B Radio Replacement Installation Package is specifically designed for a 2017-2020 Kia Optima with auto climate controls and without a factory amplifier. The Metra 99-7384B allows you replace the factory radio with an aftermarket head unit while retaining important factory functions and features.
|Kia||Optima (with Auto Climate Controls and Without Factory Amplifier)||2017-2020|
Note: Two wiring harnesses are included. Only one of the wiring harnesses will be used based on model year and features of your vehicle.
Double-DIN/Single-DIN Dash Kit: The Metra 99-7384B Radio Replacement Installation Package includes an dash kit that will house most double-DIN or Single-DIN aftermarket head units. A pocket is provided for Single-DIN installations only. The included dash kit is painted and countoured to match your vehicle's factory dash.
Climate Display: The Metra 99-7384B includes a climate display which indicates fan speed, mode, and temperature. This information was displayed on the factory radio before it was removed to install your new aftermarket head unit.
Retains Backup Camera: The Metra 99-7384B will retain your Kia Optima's factory backup camera through a composite video connection and 12-volt to 6-volt converter. Your new aftermarket head unit must be equipped with composite video rear-view camera input and feature a display monitor.
Aux Input Retention: The 99-7384B retains your Kia Optima's factory Aux input through the use of a set of male stereo RCA jacks. Your aftermarket stereo will need to be equipped with a rear-panel Aux input. If your aftermarket stereo's Aux input is 3.5mm minijack, then you will also need a minijack-to-RCA adapter (sold separately).
Steering Wheel Control Interface: The included steering wheel control interface lets you retain your vehicle's factory steering wheel controls when used with a steering wheel control compatible aftermarket receiver that features a 3.5mm or single wire steering wheel control input.
1 question already asked