About the Axxess AX-SHOCK
Beef up security and peace of mind
Most factory security systems don't have a shock sensor that trips the alarm when someone messes with the vehicle. If you've already added a Fortin EVO-ONE remote start package to your security system, you can add this protection by connecting an Axxess AX-SHOCK shock sensor to your EVO-ONE. After installing your AX-SHOCK, you'll rest assured that anyone starting to do something to your vehicle will get warned that there's an alarm onboard, and then spotlighted when the horn or siren goes wild. Warranty: 1 year.
What's in the box:
- Dual Stage shock sensor
- 23" Harness (3-pin black Molex connector on one end and 4-pin white Molex connector on other end)
Thanks for submitting your review
More details on the Axxess AX-SHOCK
Overview: The AX-SHOCK from Axxess Interfaces is an add-on shock sensor for a Fortin EVO-ONE remote start system. It enables you to add an extra layer of protection to your factory security system, which typically does not include a shock sensor. The AX-SHOCK comes with a harness that plugs into the EVO-ONE module.
Dual Stage: The AX-SHOCK is a dual-stage shock sensor, which provides a warning before full alarm output. When someone first attempts to tamper with your vehicle, the dual-stage shock sensor will sense a light jostle and trigger a warning output to the alarm (which may be a chirp or single horn beep). If the person continues to attempt to break into the vehicle, or causes a harder shock, the AX-SHOCK will trigger a full output to the alarm brain.
Wiring: The included harness has the following wire color codes:
- Red: Power
- Black: Ground
- Blue: Alarm (-) output
- Green: Warn (-) output
1 question already asked