About the Axxess AX-FDSYNC-SWC Steering Wheel Control Harness
Axxess' AX-FDSYNC-SWC harness allows you to connect the steering wheel audio controls in select 2015-up Ford Transit vehicles (if equipped) to a new car stereo without having to splice into your factory wiring. To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio.
This cable also lets you keep your factory-installed backup camera when you install an aftermarket car stereo in these vehicles. The package includes includes a harness that plugs into the Axxess ASWC-1 steering wheel audio control adapter (sold separately) and a cable to connect your backup camera to your new stereo. Once installed, you'll see images from your rear-view camera on your new receiver's screen. Warranty: 1 year.
Axxess AX-FDSYNC-SWC Steering Wheel Control Harness reviews
The product was fine but when I called to have it wired they would only do wiring tio a product sold thru you. I purchased aFord RR2, a modual, and a harness and you woudn't wire to the head harness . Sorry, took ot to a local spot and they wired it for less than 35.00, won't be buying from you anymore.
0 of 0 found this helpful
Waste of money and the Axxess tech support confirmed the statement and that sometimes, it doesn't work on some Transits. That's correct, It wouldn't work for my Transit and that's expected. I plugged it in between the 4 inch screen and the harness, per the manufacturer, no go. Axxess knew this can be an issue. No one at Crutchfield knew that you have to keep the original screen plugged in and you have to shove it behind the dash. Seriously, that's how this "solution" works. I had to remove the yellow video plug in the picture, throw away the rest of the harness and had to strip the factory wires to get my backup video to work. This too confirmed by the manufacturer. What's even worse is you have to split the video signal to the old screen now shoved behind your dash and the new radio. This creates a awful ghosting effect on the new radio. Too bad you have to keep the old screen wired because the video would look decent with only one output.
Cons: all of them
0 of 0 found this helpful
More details on the Axxess AX-FDSYNC-SWC Steering Wheel Control Harness
Vehicle Compatibility: The Axxess Integrate AX-FDSYNC-SWC harness lets you retain your factory backup camera and steering wheel controls (optional adapter required) when replacing the factory radio of your Ford Transit (4.2" display screen) with an aftermarket head unit.
Factory Backup Camera Retention: The Axxess Integrate AX-FDSYNC-SWC harness features a composite video jack that allows you to retain your vehicle's factory backup camera by plugging it into your aftermarket receiver's composite video camera input.
Retains Steering Wheel Control (optional adapter required): The Axxess Integrate AX-FDSYNC-SWC harness features a right-angle 3.5mm connector that lets you keep your vehicle's factory steering wheel controls via the Axxess Integrate ASWC-1 Steering Wheel Control Interface (120ASWC1, sold separately).
Q Crutchfield asked: Why did you buy this?