About the Metra Helios CS-HDMW4K60
Skip the long HDMI cable run to your projector
Skip the long HDMI cable run to your projector
Beam video to your TV or projector without having to run a long HDMI cable.
If you've been looking for a way to send high-quality audio/video signals wirelessly, consider Metra's CS-HDMW4K60 system. This transmitter and receiver combo takes an incoming HDMI source and transmits it up to 650 feet to your display. It's an ideal solution for sending signals to a ceiling-mounted home theater projector.
The RF-based system gives you robust signal transmission — even through walls. Keep your receiver or other HDMI source in an equipment closet or cabinet, and enjoy 4K video without having to run a long, expensive HDMI cable across your room.
Plug-and-play simplicity
Connect the transmitter to your home theater receiver's HDMI output. The signal is then beamed to the wireless receiver which plugs into an HDMI input on your TV or projector. Content fed through your receiver will instantly appear on your screen.
If you have a TV installed above a fireplace, or a projector mounted to a hard-to-access ceiling, you'll appreciate how much time and installation hassle this will save you. (You'll still need AC power at each end, however.)
Use your existing remote control
Metra includes an IR receiver and blaster so that you can relay remote control commands to your equipment. Simply position the IR receiver within line of sight of your remote, and it will send commands to the IR blaster positioned in front of the HDMI source.
Product highlights:
- wireless HDMI kit includes separate transmitter and receiver units
- transmit an HDMI source to your display up to 650 feet away
- RF signal works through walls to simplify installation
- supports IR remote commands to control source component
- infrared blaster and receiver are included
- supports resolution of up 4K at 60Hz
- HDCP 2.2 compliant
- does not support HDR-encoded content
- does not support ARC (Audio Return Channel) functionality
- supports 2-channel audio transmission (PCM stereo)
- 7-1/16"W x 1-1/4"H each (8-7/16"H with antennas raised)
- AC power adapters included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CS-HDMW4K60
What's in the box:
Metra Helios CS-HDMW4K60 owner's manual
- HDMI wireless transmitter (TX)
- HDMI wireless receiver (RX)
- 2 AC power adapters (attached 47" DC cord)
- 4 Antennas (2 pre-installed)
- IR blaster (attached 39" cable terminated by a male 3.5mm connector)
- IR receiver (attached 39" cable terminated by a male 3.5mm connector)
- 4 Brackets
- 8 Screws
12 reasons to shop with us
#4
We've got your back with 60-day returns
We want to make sure you love it!
REVIEWS
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Metra Helios CS-HDMW4K60
Product Research
Features
Wireless HDMI Extender: Metra's CS-HDMW4K60 wireless HDMI extender system can extend and HDMI audio/video signal (up to 4K video/2ch audio) wirelessly from source device to display device, up to approximately 650 feet (200 meters). The system consists of a wireless HDMI transmitter, wireless HDMI receiver, IR blaster, IR receiver, and two AC power adapters. It requires no cables between transmitter and receiver which makes the installation easy and clean.
Note: Wireless transmission distance will be different based on environment. Wall, brick, or glass will shorten the signal cover range or cause signal loss. Other wireless signals (like microwaves, WiFi, RF, or Bluetooth) may cause interference.
HDMI 2.0: The wireless HDMI transmitter is outfitted with a HDMI 2.0 input to connect your source device (such as a Blu-ray player, Game Console, or Satellite/Cable box). The wireless HDMI receiver is equipped with a HDMI 2.0 output to connect your display (such as a TV or front-projector). Both the HDMI 2.0 input and output are HDCP 2.2 compliant. The transmitter wirelessly transmits the HDMI audio/video signal from the connected source to the wireless receiver and connected display.
- Supported Video Resolutions: Supported video resolutions include 4K@24/25/3060Hz, 1080p@50/60Hz, 1080i@50/60Hz, 720@50/60Hz, 576p@50Hz, 576i@50Hz, 480p@60Hz, and 480i@60Hz
- Supported Audio Formats: The system will transmit a 2ch PCM stereo signal only. Not compatible with Dolby Digital/DTS or other multichannel audio formats.
Note: The Metra CS-HDMW4K60 4K60 cannot wireless transmit HDR (High Dynamic Range) video signals.
IR Remote Control: Thanks to the wireless HDMI transmitter's IR blaster and the wireless HDMI receiver's IR receiver, you are able to control your source component using its IR remote in the display's location.
AC Power Adapters: Both, the wireless HDMI transmitter and receiver come with an AC power adapter that will need be plugged into an AC wall outlet or surge protector (sold separately - see Accessories Tab).
Mounting Options: Both, the wireless HDMI transmitter and receiver come with mounting brackets that allow you to vertically mount them on a cabinet or wall (mounting screws not included). Or, the transmitter and receiver can simply be placed horizontally on a flat surface.
The Metra Helios CS-HDMW4K60 replaces these items
- wirelessly transmit an HDMI source to your display up to 650 feet away
- RF signal works through walls to simplify installations
- supports IR remote commands to control source component
Loading accessories...
Customer Q&A
Loading articles...
