About the Axxess MITO-03
Keep that factory amp
Keep that factory amp
The Axxess MITO-03 interface lets you install an aftermarket stereo in select 2014-up Mitsubishi vehicles, while maintaining the use of the factory amplifier. The USB-updatable module also provides parking brake, reverse, and speed sense outputs for installing a navigation receiver. The interface is prewired to plug into the ASWC-1 module (sold separately) in order to retain the use of your steering wheel controls.
Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.
Axxess MITO-03 reviews
Thanks for submitting your review
More details on the Axxess MITO-03
Vehicle Compatibility: The Axxess Integrate MITO-03 radio replacement interface is compatible with select 2014-up Mitsubishi vehicle's with factory amplifier systems. Compatible vehicles include -
Retained Features: The MITO-03 radio replacement interface module allows the replacement of the factory radio in a 2014-up Mitsubishi vehicle with an aftermarket head unit. This interface module allows you to retain factory features such as the factory amplifier system, R.A.P, and steering wheel control (optional interface required).
- Factory Amplifier: The MITO-03 allows you to retain your vehicle's factory amplifier system with full control over balance & fade.
- Retained Accessory Power (R.A.P.): The ignition power source of many newer vehicles keeps the radio on until one of the doors is opened. This feature is called the R.A.P. (retained accessory power). The MITO-03 is designed to retain this feature.
- Optional Steering Wheel Control Adapter: The MITO-03 features a right-angle 3.5mm connector that lets you keep your vehicle's OEM steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Note: If your vehicle is equipped with factory Satellite Radio or Bluetooth, you will lose these functions when installing an aftermarket head unit with the MITO-03.
Level Adjustment: If you find that your vehicle's speakers are too loud or not loud enough after installation of your aftermarket head unit with the Axxess Integrate MITO-03, then you can use the potentiometer on the radio replacement interface module to adjust volume level.
Aftermarket Radio Connection: The MITO-03 features the following hardwire connections to your aftermarket head unit and factory system.
|Yellow||+12 Volt Constant|
|Red||+12 Volt Accessory|
|White||Left Front Speaker +|
|White/black||Left Front Speaker -|
|Gray||Right Front Speaker +|
|Gray/black||Right Front Speaker -|
|Green||Left Rear Speaker +|
|Green/black||Left Rear Speaker -|
|Purple||Right Rear Speaker +|
|Purple/black||Right Rear Speaker -|
|Light Green||Not Used|
Q Crutchfield asked: Why did you buy this?