About the Axxess AX-MITSUCAM-6V Backup Camera Harness
Axxess designed their AX-MITSUCAM-6V adapter to retain the factory backup camera when adding an aftermarket radio in select 2014-up Mitsubishi vehicles. You can also use this adapter to add a new backup camera to non-equipped 2014-up Mitsubishi vehicles. The package includes the AX-CAM6V 6-volt converter needed to supply power to your camera. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this harness is compatible with your vehicle. Warranty: 1 year.
Axxess AX-MITSUCAM-6V Backup Camera Harness reviews
If you're upgrading/replacing the stock radio and want to keep the stock rear camera (because who really wants to run new wiring from the front of a car all the way to the back?), this makes it easy enough to keep it going forward. This is a very specific item however, if you didn't get your Lancer with a stock backup camera, this is not needed in the slightest. While not 100% intuitive to wire, instructions make it easy enough to get working 1st try with no smoke! Just double check before you power anything on due to the fact that sending 12~13v to the camera when it requires half that probably will not end well. I don't see what the use case of adding in an aftermarket camera to the stock radio as at that point you'd be swapping it anyway, so half of this adapter is arguably pointless. Amusingly, the new radio I paired it up with won't show anything if you manually select the rear camera view, but works perfectly fine when shifting into reverse - considering the angle of the stock camera, it's not really a problem.
Pros: Works as intended
Cons: Annoying and almost unusably short wiring
0 of 0 found this helpful
More details on the Axxess AX-MITSUCAM-6V Backup Camera Harness
Vehicle compatibility: The Axxess Integrate AX-MITSUCAM-6V lets you retain the factory backup camera when replacing the factory radio with an aftermarket head unit or add an aftermarket camera to the factory radio in select 2014-up Mitsubishi vehicles.
Factory Backup Camera Retention: The AX-MITSUCAM-6V features a male composite video jack which lets you retain your vehicle's factory backup camera by plugging into your aftermarket head unit's rear-panel camera input.
Add-On Aftermarket Camera: The AX-MITSUCAM-6V features a female composite video jack which allows you to add an aftermarket backup camera (sold separately) to your vehicle's factory radio.
Wire Code Chart:
|Red||+12 Volt Accessory|
|Yellow||+12 Volt Constant|
|Black (thick)||Chassis Ground|
|Yellow Composite Video (male)||Backup camera input|
|Yellow Composite Video (female)||Backup camera output|
|Blue/white||12V-to-6V converter Reverse|
|Blue/red||12V-to-6V converter Positive|
|Black (thin)||12V-to-6V converter Ground|
Q Crutchfield asked: Why did you buy this?
2 questions already asked