About the Axxess AX-NIS24SWC-6V Steering Wheel Control Harness
Axxess' AX-NIS24SWC-6V adapter allows you to connect the steering wheel audio controls in select 2011-up Nissan vehicles to a new car stereo without having to splice into your factory wiring. To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio. You'll also retain the factory backup camera and aux input when adding an aftermarket radio in your Nissan. The package includes the AX-CAM6V converter needed to supply power to the camera, plus a pre-wired harness that plugs into the ASWC-1. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this harness is compatible with your vehicle. Warranty: 1 year.
Axxess AX-NIS24SWC-6V Steering Wheel Control Harness reviews
This was part of the recommendation from Crutchfield. It was supposed to work with a 2015 Altima S so there would be no splicing into the factory wires. It did not, however. I had to clip the blue and pink wires and tap into the factory harness. I got it to work but it was not as straight forward as it was supposed to be.
Pros: Worked in the end
Cons: Harness had to be cut, contrary to the whole point of the thing.
0 of 0 found this helpful
Does what it's meant to. On pioneer radios make sure to give power directly from ACC(red) wire, because the receiver doesn't give enough power.
0 of 0 found this helpful
It says that does not fit my nissan xterra 2015 but it actually fit, it helps to retain the backup camera and aux port but that's it, this harness even with the Aswc1 doesn't work for the steering wheel controls. For the steering wheel controls to work its required to use the harness that comes with the aswcq; that's why 4 stars instructions are misleading, instructions first says follow aswc1 and then next sentence says discard the harness of the aswc1. Only with the vehicle service manuals I realized that this harness will not work with the aswc1 and that's the second error in the description of the product and the manual it states that only works with the aswc1 which is not true, harness works fine without the aswc1.
Pros: Retains factory camera and aux port.
Cons: Misleading installation manual.
1 of 1 found this helpful
Harness is misleading, it is ONLY for retaining the factory reverse camera. NOT for retaining steering wheel control. The Axxess site does not really make that clear. If you want to retain the steering wheel controls you need to purchase another ASWC1 unit and wire according to the directions with the harness that accompanies the unit. However it does allow you to use the factory reverse camera flawlessly on an aftermarket radio which is why it gets a 2-star. If I knew that in advance I'd probably give it 4 stars.
Pros: Allows you to use the factory reverse camera flawlessly with an aftermarket radio
Cons: Description is very misleading
2 of 3 found this helpful
More details on the Axxess AX-NIS24SWC-6V Steering Wheel Control Harness
Vehicle compatibility: The Axxess Integrate AX-NIS24SWC-6V harness is compatible with select 2011-up Nissan vehicles that are equipped with factory navigation.
|Rogue (w Bose)||2012-2013|
Note: Not compatible with vehicles equipped with an "All Around Camera" system.
Retained Features: When installing an aftermarket radio in a 2016-up Nissan, the Axxess Integrate AX-NIS24SWC-6V harness allows you to retain the following factory features that are normally lost when removing the factory radio.
- Aux Input: The AX-NIS24SWC-6V includes stereo male RCA connectors that allow you to retain your factory installed 3.5mm jack (your aftermarket radio must also have a rear-panel stereo Aux input).
- Backup Camera: In addition, the AX-NIS24SWC-6V harness includes a composite video connector to allow you to retain your factory installed backup camera.
- Steering Wheel Controls (in Nissan Altima Only): The AX-NIS24SWC-6V harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring, using the Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Note: Additional kit and wiring harness will also be needed to complete installation.
Reverse Gear Output: The AX-NIS24SWC-6V provides a Reverse Gear output.
Wire Code Chart:
|Red||+12 Volt Accessory|
|Red||+6 Volt Camera Power|
|3.5mm Jack (male)||SWC output|
|Yellow Composite Video (male)||Backup camera input|
|White RCA (male)||Aux input (left)|
|Red RCA (male)||Aux input (right)|
|Blue/white||12V-to-6V converter Reverse|
|Blue/red||12V-to-6V converter Positive|
|Black (thin)||12V-to-6V converter Ground|
Q Crutchfield asked: Why did you buy this?
1 question already asked