About the Axxess AX-NIS32SWC-6V Steering Wheel Control Harness
The Axxess AX-NIS32SWC-6V harness allows you to connect the steering wheel audio controls in select 2010-up Nissan vehicles with the 4.3" factory radio to a new car stereo without having to splice into your factory wiring. To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio. You'll also need a vehicle-specific wiring harness to install your aftermarket stereo; you'll see installation packages when you add a car stereo to your cart. You'll also be able to retain your Nissan's backup camera with a compatible car stereo. Warranty: 1 year.
Axxess AX-NIS32SWC-6V Steering Wheel Control Harness reviews
Thanks for submitting your review
More details on the Axxess AX-NIS32SWC-6V Steering Wheel Control Harness
Vehicle compatibility: The Axxess Integrate AX-NIS32SWC-6V harness is compatible with select 2010-up Nissan vehicles with a factory installed 4.3" display radio.
|Quest (without Bose)||2011-up|
Note: Additional kit and wiring harness will also be needed to complete installation.
Retained Features: When installing an aftermarket radio in a compatible Nissan vehicle, the Axxess Integrate AX-NIS32SWC-6V harness allows you to retain the following factory features that are normally lost when removing the factory radio.
- Steering Wheel Controls: The AX-NIS32SWC-6V harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring, using the Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
- Backup Camera: In addition, the AX-NIS32SWC-6V harness includes a composite video connector to allow you to retain your factory installed backup camera.
Note: The AX-NIS32SWC-6V only retains the factory backup camera (not steering wheel control) in the following Nissan vehicles - Altima coupe or sedan (2010-2013), Cube (2010), Frontier (2013-up) Juke (2015-up), Quest (2011-up), Rogue (2011-2013), Rogue Select (2014-2015), Sentra (2010-up), Titan (2013-2015), Versa Note (2014-up).
Reverse Gear Output: The AX-NIS32SWC-6V provides a Reverse Gear output.
Wire Code Chart:
|Red||+12 Volt Accessory|
|Red||+6 Volt Camera Power|
|3.5mm Jack (male)||SWC output|
|Yellow Composite Video (male)||Backup camera input|
|Blue/white||12V-to-6V converter Reverse|
|Blue/red||12V-to-6V converter Positive|
|Black (thin)||12V-to-6V converter Ground|
The Axxess AX-NIS32SWC-6V Steering Wheel Control Harness replaces these items
- works with vehicle-specific wiring harness to retain back-up camera in select 2014-up Nissan vehicles
- includes "plug and play" connection for Axxess ASWC-1 steering wheel control interface (sold separately)
Q Crutchfield asked: Why did you buy this?
4 questions already asked