Metra Helios AS-SPKR-11

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?

A

The diameter of the base is 7.4375" X 7.4375". We don't have the height of the base plate but I would estimate it to be less than 2".

[ Cosmo May 13, 2019 ] Staff

Is this a universal stand? Will it work with the speakers of the Bose Lifestyle 535 system ?

A

I bought these stands for a Vizio surround system. The stands allow you to mount different size speakers and comes with different sizes of hardware.

[ BROCKTON Jun 18, 2021 ]

I bought these stands and I have the JBL 91 with the two satellites and I see no way these can be attached to that stand any advice?

A

Hi Roger, I wound up returning the stands. They were way too flimsy to trust mounting any set of speakers onto. Thanks, Stephen

[ Stephen Jan 18, 2021 ]

Will these stands work with the wireless surround speakers of the JBL BAR 9.1 sound bar system?

A

These stands will work to hold the surround speakers (weight and all) as long as you also use the mounting bracket included in the box that makes them wall mountable. We just mount to these stands instead of the wall

[ Paul Jun 14, 2020 ] Staff

A

Not really. I bought these for that exact purpose, and while they may work for you, I would not recommend. The S10s are bigger than i thought and ending up installing floating shelves at the back of the room to keep my S10s on. The base on these is not as wide as I would have thought and makes for an unstable setup if you need to raise them up at all.

[ ZACHARY May 21, 2020 ]

Can I use this stands for Lg spk8-s speaker for the back speaker?

A

I looked at the specs for the LG's and they are smaller/lighter than the Mirage I'm using, so they should be fine. Not sure if you have right angle wall brackets? If you do, you should be able to mount them to the stands. Looks like a nice add on for the rear channel!

[ Vince Aug 25, 2019 ]

A

No those will likely not work with the Bose satellite speakers. They use a proprietary Bose mounting size which only works with Bose stands and wall mounts. You might consider something like these Sanus stands that the speakers can rest flat upon https://bit.ly/2J3eEEj

[ Cosmo Jul 01, 2019 ] Staff

I see there is a hole for a slightly larger screw, will it fit an M6 screw size speaker?

A

From what I can tell, the stands are compatible with M4 and M5 screw sizes. They do not come with M6 screws or washers, and are not listed as compatible with that screw size.

[ Calvin Jun 20, 2019 ] Staff

What is the measurement from the mounting hole and the beginning of the curve on the support beam? My speakers are 11.5 inches high and I want to make sure they sit straight.

A

The distance from mounting hole to curve is approximately 3 inches. Be aware that these stands are smaller than they look in the picture - I would not recommend them for medium to large speakers.

[ Kevin Jun 16, 2019 ]

A

It's 5 inches, and the front to back offset is about 2 1/2". I guess it depends on where the bracket attaches to the speaker. Hope this helps!

[ Vince Jun 15, 2019 ]

A

I have no idea. I returned mine in pieces after the cheap plastic parts broke while assembling them. The one I was able to get put together without it breaking tipped over when i put my Polk T15 bookshelf on it. I highly recommend choosing another stand.

[ Joseph Jun 14, 2019 ]

what's the dimension of the base? It also looks like the base is arched........what is the height of the arch?