Overview

Metra AS-SPKR-26 are clever side-clamping brackets that lets you aim a bookshelf speaker. The articulated joint offers ±8° tilt and ±90° swivel for speakers weighing up to 33 lbs.

Product highlights:

pair of side clamping brackets with cable management for clean installation
foam padding to protect clamped speakers
±8° tilt, ±90° swivel
works with bookshelf speakers that measure 5-1/2" to 10-7/8" wide with a maximum depth of 10"
weight capacity: 33 lbs.
warranty: 1 year
Our 60-day money-back guarantee
MFR # AS-SPKR-26

What's in the box:

Metra Helios AS-SPKR-26 owner's manual

2 Wall-brackets
2 Speaker brackets
2 Plastic covers
2 Plastic adapters
2 Hex-head bolts
4 Small self-tapping screws
4 Large self-tapping screws
4 Plastic anchors
2 Nuts
4 Metal washers
2 Plastic washers
Allen-key
Hex-wrench
Installation Instructions

Featured review

I used these to mount 2 Klipsch RW-51M on the wall. I needed the backers to side mount and also tilt. These fit the bill and look great! Very easy install.

Jeff from Downers Grove, IL

See all 45 reviews

Customer Q&A

Would the Metra Helios AS-SPKR-26 work with a Polk ES-15? I will be putting it on the wall and using the 8% tilt with these bookshelf speakers.

They work very well. I'm not familiar with those particular speakers but one of the main issues would be to check the weight of the speakers of the weight limits of the wall bracket.

12 reasons to shop with us

#11

Eco-friendly "peanuts"

Biodegradable and made in-house

See all reasons

Metra Helios AS-SPKR-26 reviews

Average review:

45 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Verified customer

Verified employee purchase

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

Product Research

Features

Side-Clamping Speaker Wall-Mount Bracket: The Helios AS-SPKR26 is designed to mount to the wall and hold speakers up to 33 lbs with a side clamping bracket design. It swivels to allow for adjustment without any required tools and features cable management to keep wiring organized. The mount features a -8 to +8 degree tilt range and a +90 to -90 degree swivel range to allow the speaker to be adjusted for optimal sound positioning. A foam pad prevents the device from scratching or dropping, as it securely holds the device into place. This bracket is ideal for use in home audio systems with large bookshelf and surround speakers. The AS-SPKR26 is sold in pairs.

Compatibility: The Helios AS-SPKR26's side-clamping design works well with bookshelf loudspeakers that measure 5.5" to 10.875" wide with a maximum depth of 10" and a maximum weight of 33 lbs.

High-Quality Steel Construction: The Helios AS-SPKR26 is constructed from high-quality steel with a smooth satin black powder coated finish for long life and durability. It also comes with durable black plastic covers.

Installation: The AS-SPKR-26 speaker brackets can be installed on wood stud walls, concrete walls, and brick walls. The brackets secure to a wood stud wall using the included screws. In addition to the mounting screws, anchors are provided for concrete and brick wall installation. These brackets are designed for indoor installation only (not recommended for outdoor use).

Accessories

Loading accessories...

Q&A

6 questions already asked

My speaker cables are already inside the wall and currently exit through a small hole in the wall. Is it possible to attach the wall plate of this speaker mount over this hole so that the speaker cable feeds through the wall plate and into the mount's extension arm? This would allow the cable to exit through the hole on the extension arm and into the back of the speaker. This would maximize hiding the cable so that a visible exit hole on the wall near the speaker mount wouldn't be necessary.

[ 1165mac Apr 28, 2022 ]

2 answers

As long as the cables exit your wall in the exact location that you want to locate the speaker mount it will work. That's how I mounted mine.

[ HUDSON Apr 29, 2022 ]

Yes

[ Carlos Apr 28, 2022 ]

would you mount a JBL 306 PMKII BOOKSHELF NOT DRILLED at 80 inches with these in a public space?

[ Laureen Apr 20, 2022 ]

1 answer

I mounted Klipsch bookshelf speakers roughly the same size without drilling and I've had no problems at all. However, I tilted my mounts just slightly, so they're both just about level. Just make sure the brackets on the mounts are tight; tight as you can get them. And I'd try to keep your 306's as level as possible.

[ WILLIAM Apr 21, 2022 ]

Would the Metra Helios AS-SPKR-26 work with a Polk ES-15? I will be putting it on the wall and using the 8% tilt with these bookshelf speakers.

[ Andrew Feb 23, 2022 ]

4 answers

yes i have my back surround like that with 2 klipsh bookshelves

[ Angel Feb 27, 2022 ]

They work very well. I'm not familiar with those particular speakers but one of the main issues would be to check the weight of the speakers of the weight limits of the wall bracket.

[ Ronald Feb 26, 2022 ]

My hangers are 7' up the ceiling, holding Klipsch bookshelf speakers. There should be no issues with your Polks. The clamp is strong. Read the reviews. I have the same issue with the mounting cover, but the materials are robust and sturdy.

[ Steve Feb 26, 2022 ]

Well... Let's see. IF you looked at the "Details" tab of this product, you'll read the part that says: "Compatibility: The Helios AS-SPKR26's side-clamping design works well with bookshelf loudspeakers that measure 5.5" to 10.875" wide with a maximum depth of 10" and a maximum weight of 33 lbs." So now all you need to do it look up the specs of your speakers to see if they fall withing the above criteria. Take that maximum depth with a grain of salt or two. I am using these stands to support a pair of Klipsch RP-600Ms and they have a depth of a full 12 inches. Just be sure to have the side clamps of the stands positioned properly.

[ Michael Feb 26, 2022 ]

Looks like these stands are designed for the speaker to be placed on to the stand and then screwed in. My question is, could this stand be turned upside down and then "hold up a speaker? I'd like to mount this on a short soffit coming from the ceiling. I don't have the height clearance to place the speaker on top of it. But I would have space for the speaker to "hang down" so to speak. Thanks for any help.

[ cab2arch Feb 11, 2022 ]

4 answers

Hi, no, you can not turn speakers upside down, because speakers are hold by the bracket by adjusting the front edge against the speaker holding it tight. Actually, you do not alter in any way the speaker, if you do not have enough celling clearance, you have to opt for a more compact speaker. Hope this help!

[ CARLOS Feb 14, 2022 ]

You would be trusting the stands to support the speakers using 1) the friction produced by the clamps, and 2) two tiny wood screws that are provided. As far as the design of the stands goes it may be possible to invert the device. And you could opt to purchase two woods screws that are larger and would produce a more secure hold by tapping into the speaker cabinet deeper. It would be worth a try. Ultimately your purchase is backed by Crutchfield's outstanding return policy and customer service. No worries in trying it in my opinion.

[ WILLIAM Feb 11, 2022 ]

I have 4 of these mounts and have only used them as prescribed. However, I dont see any "specific" reason that they couldn't be utilized in the manner you're asking about. I would say the importance of making good contact with the screw to the speaker will be even more important, as that is what will be supporting the weight of your speakers!

[ DOUGLAS Feb 11, 2022 ]

They are great stands but not designed for the way you would like to use them.

[ SCOTT A. Feb 11, 2022 ]

I need stand for speaker Bw Lm1 ?

[ Luis Jan 01, 2021 ]

3 answers

They work great for me.

[ John Jan 01, 2021 ]

Works well for my Klipsch speakers

[ Gary Jan 01, 2021 ]

I would think an actual shelf would look much better - these would be visible - if they even worked

[ Kathleen Jan 01, 2021 ]

can you tilt these down i need to mount 13ft high and then aim down to listen area?

[ Nate May 07, 2020 ]

8 answers

They will tilt down a bit, but I'm not sure if they will tilt down enough for being 13' in the air. I'd say maybe a 10-15 degree tilt is the max. I have mine level so I don't have to run set screws into my speakers. Hope that helps.

[ Jeff May 07, 2020 ]

i have mine 10 ft up and they are level. I do not believe they tilt

[ Gary May 07, 2020 ]

Yes Nate, they tilt.these are great.very strong.

[ Harry May 07, 2020 ]

They only tilt downward 8 degrees. Depending on the size of your room this may not be enough.

[ PETER J May 07, 2020 ]

You could also possibly attach the bracket to the wall at a slight angle that will allow you to tilt them even further.

[ Jerry May 07, 2020 ]

Yes you can tilt downward slightly. Not sure they will tilt down enough if you're hanging them 13 feet high.

[ Jerry May 07, 2020 ]

No.

[ Richard May 07, 2020 ]

No way to tilt them downward. It is ok to turn them left or right to aim them side to side.

[ JIM May 07, 2020 ]

SHOW MORESHOW LESS

Articles

Loading articles...

Our Top Picks

Buying guides

How-to guides

Videos

All finished with your chat session?

Thank you. You are in line to receive a call from .

It's your turn. will be calling you shortly at .

Sorry, the call-back feature is currently unavailable.

Metra Helios AS-SPKR-26

On-wall speaker mounts

Need an expert?

Hands-on research

Since 1974

About the Metra Helios AS-SPKR-26

Product highlights:

What's in the box:

Featured review