Contact us
Close contact box

T-Spec Car Speaker Wire

Speaker wire with black/white jacket — priced per foot (16-gauge)

Item # 120SW16WB1

California customers:
Please click here for your Proposition 65 warning.

In Stock
$0.69 ft

Other options

About the T-Spec Car Speaker Wire

This wire meets the highest specifications

Your amplifier puts out big power and needs low-resistance wiring in order to deliver its power effectively. T-Spec speaker wire meets all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, resistance, and insulation quality, so you can be sure that your power will flow efficiently to your speakers and subs.

Oxygen-free virgin copper

Recycled copper often contains impurities and contaminants from the recycling process that can adversely affect a copper wire's conductivity. That's why T-Spec uses only oxygen-free non-recycled, virgin copper to maximize power flow in their speaker wires.  The high strand count of this cable and its special PVC blended jacket give it an extraordinary flexibility for an easier installation. In fact, this speaker wire is so rugged that it's marine certified, too. Warranty: 1 year.

This wire is sold by the foot — enter the number of feet desired in the "quantity" field of your shopping cart.

What's in the box:

  • v10 16 AWG speaker wire with white/black jacket (sold by the foot)

Customer reviews

Loading reviews...

T-Spec Car Speaker Wire Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the T-Spec Car Speaker Wire

Product Research

Features

Overview: T-Spec v10-series speaker wire meets CEA-2015 and ANSI specifications for gauge size. It also meets BC-5W2 marine compliance. Constructed of full virgin copper, T-Spec power wire has a high strand count for maximum conductivity to give your speakers the highest signal capability. The wire is wrapped in an ultra-flexible black/white PVC blended jacket. The white jacketed conductor is square in shape, and is marked for positive (+) connection. The black jacketed conductor is round in shape, and is unmarked.

Length: This 16 AWG bulk speaker wire is sold by the foot, and is cut to order.

Loading accessories...

Customer Q&A

3 questions already asked

Q
How long is this? I couldn't find the length in the details
[ Josh  Feb 01, 2014 ]
4 answers
A
Its priced per foot, so if you want 6ft you buy six.
[ NICK  Feb 14, 2014 ]
A
It is priced per foot. Each foot will cost you $1.99. You can order it in any length you want.
[ NOAH J  Feb 04, 2014 ]
A
You buy it by the foot
[ WILLIAM  Feb 02, 2014 ]
A
You buy it by the foot.
[ CHAD  Feb 02, 2014 ]
Q
Will this hold a 1500 wat amp?
[ Jalen  Aug 23, 2016 ]
1 answer
A
If you a referring to a continuous (RMS) wattage output specification, no, not at all. If your amp will provide a true 1,500 watts RMS, I recommend using a much thicker wire gauge to connect your subwoofers. The longer the run of wire between the amp and subs, the thicker you'll need the wire to be. I would recommend using a minimum of 12 gauge wire for that type of power: http://www.crutchfield.com/g_50600/Car-Speaker-Wire.html?tp=2917#&nvpair=FFGauge|12-gauge I hope that helps! http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Aug 27, 2016 ]  Staff
Q
What wire gauge is recommended for wiring a sub to an amp that pushes 300W RMS? Is 16 gauge acceptable?
[ David  Jan 26, 2015 ]
3 answers
A
16 is fine but I would run 14 gauge
[ CHUCK  Jan 27, 2015 ]
A
16 gauge will work. But, 14 or 12 gauge will help with signal loss versus the smaller wire.
[ JOHN  Jan 27, 2015 ]
A
Wire Gauge Size Total Amplifier RMS Wattage 0/1 AWG 1000+ Watts 2 AWG 1000-1500 Watts 4 AWG 400-1000 Watts 6 AWG 600-800 Watts 8 AWG 200-400 Watts Kicker Kit, 20 ft, 50 amp, good choice 10 AWG 100-200 Watts Hope this helps, Best,
[ Jerry  Jan 27, 2015 ]

Loading articles...

TOP