About the Axxess TYTO-02 Wiring Interface
The TYTO-02 interface allows the user to install an aftermarket car stereo in select 2012-up Toyota models and retain the factory amplified audio system. The interface retains your balance and fade controls, provides accessory power, and is micro-USB updateable. The interface also includes a plug-in connector for the ASWC-1 steering wheel control harness (sold separately) which makes it much easier for you to keep your steering wheel audio controls. If you're installing a new car stereo with a rear aux input, you can retain your Toyota's auxiliary input too. Warranty: 1 year.
More details on the Axxess TYTO-02 Wiring Interface
Radio Replacement Interface: The Axxess Integrate TYTO-02 interface allows you to replace the factory navigation radio in select 2012-up Toyota vehicles featuring s factory amplified system with an aftermarket head unit.
Vehicle Compatibility: The TYTO-02 is compatible with the following 2012-up Toyota vehicles.
|Avalon (w/ NAV)||2013-up|
|Camry (w/ NAV)||2012-up|
|Prius 3rd gen (w/ NAV)||2012-up|
|Prius PHV (w/ NAV)||2012-up|
|Prius V (w/ NAV)||2013-up|
|Sequoia (w/ NAV)||2013-up|
|Tacoma (w/ NAV)||2012-up|
|Tundra (w/ NAV)||2014-up|
|Venza (w/ NAV)||2013-up|
Retains Factory Amps: The Axxess Integrate TYTO-02 interface will retain your vehicle's factory amplifier and fade control (when applicable).
Factory Aux Input Retention: The TYTO-02 interface module will retain your vehicle's factory aux input through its stereo RCA jacks. Your aftermarket head unit will need to have a rear Aux input.
Steering Wheel Control Compatible: The TYTO-02 features a right-angle 3.5mm connector that lets you keep your vehicle's factory steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Wiring Harness: In addition to molex connectors which plug into your vehicle's factory radio plugs and the interface module, the wiring harness also provides the following bare-wire leads which will need to be hardwired to your aftermarket head unit's wiring harness.
|Red||+12 Volt Accessory|
|Yellow||+12 Volt Constant|
|White||Left Front Speaker +|
|White/black||Left Front Speaker -|
|Gray||Right Front Speaker +|
|Gray/black||Right Front Speaker -|
|Green||Left Rear Speaker +|
|Green/black||Left Rear Speaker -|
|Purple||Right Rear Speaker +|
|Purple/black||Right Rear Speaker -|
|Light Green||Not Used|