About the T-Spec v12 Series VPNB4
Distributes power and ground safely and neatly
Distributes power and ground safely and neatly
T-Spec designed this VPNB4 distribution block to handle the high-current power and ground distribution for four amplifiers, and protect them each with a mini-ANL fuse (sold separately). This hefty little block distributes power from a 1/0-gauge positive power cable to four 8-gauge amplifier power leads, each routed through a mini-ANL fuse. Then, the same block receives the amps' four ground wires and combines them into a single 1/0- to 4-gauge ground cable to your car's chassis. The VPNB4 also features a second 1/0-gauge input so you can run a second power cable from your battery, a great option if you've got some power-hungry amplifiers.
Secures all your connections
T-spec's Universal Screw Design for securing the wires and fuses to the block works with a variety of tools, so you will always be able to change a fuse without having to carry around a special tool. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant plastic cover protects your connections from the weather. Warranty: 1 year.
What's in the box:
- v12-Series distribution block for both power and ground
- Plastic cover (attached)
- 3 Installed rubber grommets and sleeves on power/ground inputs (1/0 ga.)
- 4 Installed rubber grommets and sleeves on power outupts (4/8 ga.)
REVIEWS
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the T-Spec v12 Series VPNB4

Product Research
Features
Overview: The T-Spec VPNB4 compact power & ground distribution block is constructed of solid, black nickel-plated brass for maximum conductivity. The distribution block features a translucent, impact-resistant polycarbonate cover with TPE (Thermoplastic Elastomer) grips for easy cover removal. The distribution block has a small footprint, with two holes in the base for mounting using screws or wire ties (both sold separately).
Configuration: The VPNB4 distribution block features 2 power input ports into a single input block, with each port accommodating a 1/0 AWG wire (only one input port needs to be connected). Four power outputs can accommodate either 4 or 8 AWG wire and get connected to the input block via mini-ANL fuses (sold separately). Rubber grommets and sleeves are provided on the inputs as well as the outputs. The output grommets can be removed, with only the rubber sleeve installed, allowing 4 ga. wire to be inserted. These provide a tight seal against dirt or particle ingress with either size wire. The center section of the distribution block features a single ground block with one 1/0 AWG input (rubber grommet and sleeve included) and four 4 AWG outputs.
Set Screws: Input, output, and fuse connections are secured with Torx T-20 set screws. A T-20 Torx driver (sold separately) is required to tighten or loosen the set screws.
Optional Ferrules: Install Bay (Metra) wire ferrules (sold separately) are designed to crimp onto your power, ground, or speaker wire and provide a clean, solid connection to your terminal block or amplifier with set-screw connections. Bare wire is slid into the length of the ferrule and then crimped onto the wire. This keeps all copper strands held tightly together, with no splaying while tightening the terminal connection. Install Bay wire ferrules can be found here.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...