Skip Navigation

XS Power AK2500

Secondary battery wiring kit (2500-3000 watts)

Item # 122AK2500

Low Stock

Add to Cart

Earn up to 120 Rewards points

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat

Overview

Our take on the XS Power AK2500

Instead of hunting around the web or your local big box store for the wires, fuses, and hardware you need to install a secondary battery in your vehicle, save yourself some time and hassle with an XS Power wiring kit. You'll get everything you need — power wire, ground wire, fuses, fuse holders, wire ties, and even screws.

Everything you need, in one convenient kit

Instead of hunting around the web or your local big box store for the wires, fuses, and hardware you need to install a secondary battery in your vehicle, save yourself some time and hassle with an XS Power wiring kit. You'll get everything you need — power wire, ground wire, fuses, fuse holders, wire ties, and even screws.

Rated for 2500-3000 watts, this AK2500 kit is designed to make installation as painless and easy as possible. The ring terminals are already crimped onto the wire, so all you'll really need for installation is a screwdriver and the means to strip a small section of wire that goes into the fuse holder. Warranty: 1 year

What's in the Box:

  • 18' 2 AWG Power wire
  • 3' 2 AWG Ground wire
  • 2 ANL Fuse holders (250 amp ANL fuse installed in each)
  • 2 Battery clamps (positive/negative)
  • 10 wire clamps
  • Two 2 AWG Crimp ring-terminals
  • Two 1-1/2" Pieces of heat-shrink tubing
  • 2 Grommets
  • Ten 1/2" self-tapping screws
  • Ten 4" Zip-ties
  • 5 mm Allen key
Reviews
Details

Hands-on research

Product Research

Features

Overview: The XS Power AK-2500 wiring kit is designed for installing a secondary battery to the vehicle's existing charging system. The kit comes complete with 18' of 2 AWG power wire that gets run from the existing vehicle battery to the new battery's location, and includes 2 ANL fuse holders, each with a 250 amp ANL fuse installed. The fuse holders should be placed in-line on the power wire 12 to 18 inches from each battery terminal. Wire is attached to the fuse holders with hex-head set-screws using the included 5 mm Allen key. Two battery clamps are included for connection to the new battery's terminals, as well as a 3' length of 2 AWG ground wire for the add-on battery. Other accessories include 10 wire clamps w/ self-tapping screws, 10 zip-ties, 2 rubber grommets, and 2 additional crimp-on ring terminals with two 1-1/2" pieces of heat-shrink tubing.

Specifications:

  • Wire Type: 100% OFC
  • Power Wire Length: 18 Feet
  • Power Wire Gauge: 2 AWG
  • Ground Wire Length: 3 Feet
  • Ground Wire Gauge: 2 AWG
  • Fuse Holders: 2
  • Fuse Type: ANL
  • Fuse Rating: 250 Amp

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A