About the PAC TM-100
The PAC TM-100 Tri-Way crossover allows you to power a pair of stereo speakers and a subwoofer simultaneously from a Tri-Way compatible 2-channel amp. It's a cost-effective way to drive a subwoofer.
The TM-100 has input and output wires that you connect to your amp's speaker outputs and to the wires leading to your speakers. A 12 dB/octave low-pass filter sends frequencies below 100 Hz to your subwoofer. A 6 dB/octave high-pass filter sends frequencies above 100 Hz to your main speakers. Handles 250 watts RMS per channel. 4-3/4"W x 2-1/16"H x 3-13/16"D. 1-year warranty.
Important Note: A Tri-Mode or Tri-Way compatible amplifier is required.
What's in the box:
- Tri-mode crossover w/ attached 4" wire leads for amplifier left and right input/mono woofer (+/-)/2 satellites (+/- x 2)
- 4 mounting screws
- Instruction sheet
- Specs printed on crossover
Featured review
This works well driving my 6 1/2" components and an 8" Bazooka using a Profile AP400 (65 Watts/Channel). I'm sure the sub could hit harder if it where on the amp by itself, but I'm more than happy with the overall sound of the system.
Jason from South Bend, IN
12 reasons to shop with us
#11
Eco-friendly "peanuts"
Biodegradable and made in-house
Reviews
Customer reviews
Loading reviews...
PAC TM-100 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the PAC TM-100
Product Research
Crossover Wiring
Connections
For an amplifier which uses the Left Plus and Right Minus outputs for bridged output:
- White to amp's left plus. White/black to amp's left minus
- Gray to amp's right plus. Gray/Black to amp's right minus
- Green to plus and green/black to minus of mono woofer
- Yellow to plus and yellow/black to minus of left speaker
- Red to plus and red/black to minus of right speaker
For an amplifier which uses the Right Plus and Left Minus outputs for bridged output:
- Gray to amp's left plus. Gray/black to amp's left minus
- White to amp's right plus. White/black to amp's right minus
- Green to plus and green/black to minus of mono woofer
- Red to plus and red/black to minus of left speaker
- Yellow to plus and yellow/black to minus of right speaker
For an amplifier which uses the Left Plus and Right Plus outputs for bridged output:
- White to amp's left plus. White/black to amp's left minus
- Gray/black to amp's right plus. Gray to amp's right minus
- Green to plus and green/black to minus of mono woofer
- Yellow to plus and yellow/black to minus of left speaker
- Red/black to plus and red to minus of right speaker
Note: Nominal impedance of all speakers must be 4 Ohms.
Loading accessories...
Customer Q&A
Loading articles...
