About the Pioneer AVH-P6400CD
Pioneer's AVH-6400CD CD receiver/monitor makes a great central component for your entire mobile theater system! The wide screen 6-1/2" LCD monitor is fully motorized and can be adjusted to give you the best viewing angle for your in-car DVDs, television shows, or video games. The CD player will read your CD-R/RW mixes and give them depth and definition, thanks to the potent built-in MOSFET amplifier (27 watts RMS/50 peak x 4).
The monitor features five selectable viewing modes and an anti-glare, low-reflection screen. Add a DVD changer or TV tuner to your system, and the wide screen monitor becomes a thrilling display for your movies and shows (vehicle must be parked for viewing). Navigating your way to DVD chapters or disc tracks is easy and fun with the on-screen menus.
This unit packs lots of tone-shaping muscle for your tunes and soundtracks. Easy EQ offers five preset tone curves and a 3-band parametric EQ, while Sound Focus EQ improves your front soundstage with independent tone settings for the front and rear speakers. Three sets of 4-volt preamp outputs let you connect external amps and subs for truly dynamic sound. You'll even find inputs for a navigation system and a reverse angle back-up camera!
The Supertuner III locks in excellent AM/FM radio reception when you're looking to cruise the airwaves. Add an optional XM Satellite Radio Tuner and you'll expand your choices into over 100 channels of music, news, and entertainment beamed directly into your car, coast-to-coast!
- fully-motorized 6.5" wide screen monitor
- display angle adjustment
- anti-glare, low-reflection screen
- detachable control panel
- plays CDs, CD-Rs, and CD-RWs
- Supertuner III tuner
- Sound Focus EQ
- Easy EQ
- CD/DVD changer/TV tuner controls
- XM radio-ready (XM Radio subscription, tuner, antenna required to receive the satellite radio signal) service is available only in the lower 48 states, not available in Alaska, Hawaii, or U.S. territories
- audio/video input
- navigation input
- rear camera input
- video output
- MOSFET50 internal amp
- 4-volt front, rear, and subwoofer preamp outputs
- wireless remote
- 27 watts RMS/50 peak x 4 channels
- CD frequency response 5-20,000 Hz
- CD signal-to-noise ratio 94 dB
- FM sensitivity 9 dBf
- 1-year warranty
What's in the box:
- AM/FM/CD/AV receiver with 6.5" video monitor
- 4 Metal side brackets (2 installed on unit)
- 4 Bracket screws (mounted on unit)
- Trim ring
- Detachable control panel
- Wireless remote control (CXB9039)
- CR-2025 lithium battery (installed in remote)
- Wiring harness (with in-line noise filter and 10A fuse/fuse holder)
- Preamp and video input/output harness
- In-line ferrite core noise filter
- 17.75" Black concealing tape
- Rear mount stud
- Rubber bushing
- Face fixing screw
- 4 Countersunk ISO mount screws
- Four 3mm ISO mount binding screws
- Four 6mm ISO mount binding screws
- Operation Manual
- Installation Manual
- Warranty sheet
- Caution sheet concerning magnetic part of the product
- Attention sheet concerning combining this unit with a multi-DVD changer
- Product Registration card with BoomerangIt label
Thanks for submitting your review
More details on the Pioneer AVH-P6400CD
Features & specs
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||XM|
|RMS Power (CTA-2006)||27 watts|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||50-15kHz|
|Sub Preamp Outputs||Yes|
|Switchable Rear Preamp Outputs||---|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||4 volts|
|Key Button Color||Green/Blue|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|FM Sensitivity||9 dBf|
|Radio Data System||No|
|Music File Playback|
Motorized 6.5" TFT LCD Color Display: The AVH-P6400CD features a motorized 6.5" TFT Active Matrix, 16:9 wide screen display with an adjustable viewing angle. The screen has an anti-glare, low reflection coating for better visibility.
Detachable Control Panel: To prevent theft, the control panel (the bottom two-thirds of the front panel) can be detached from the unit. Note: There is no case for the detachable control panel supplied with this unit.
Ultra-Slim Profile CD Player: This unit has a single CD player, compatible with CD-R and CD-RW discs. It's compatible with CD text discs, plus you can enter names as long as 10 characters for up to 48 discs.
XM-Satellite Ready: This unit has controls for an optional Pioneer XM Satellite Radio tuner. Note: Receiving XM Satellite Radio programming also requires a compatible antenna and a subscription.
Audio/Video Inputs: The AVH-P6400CD has a stereo audio and composite input for use with optional A/V equipment such as a DVD player or changer, VCR, or TV tuner. You can also add a rear view camera, and the unit will automatically switch to the camera input when the vehicle is put into reverse. (This feature requires connecting the unit to the vehicle's backup light circuit.) In addition, there is a separate 26-pin RGB input for an optional Pioneer navigation system.
Video Output: The unit has a separate composite video output jack for use with a rear monitor.
Video Adjustments: You can store numerous video settings for each source, including brightness, contrast, color and hue.
Dimmer: You can select the brightness level from three settings: daytime, evening, and nighttime viewing. After setting the brightness level, the unit uses an ambient light sensor, located on the top of the monitor frame, to automatically adjust the brightness to an optimum level within the setting range you've selected.
Sound Focus EQ (SFEQ): The Sound Focus EQ clarifies the sound image of vocals and instruments through the use of "focused" seating positions. You can select different SFEQ settings: FRT1 boosts the treble on the front outputs and the bass on the rear outputs, FRT2 boosts both treble and bass on the front and the bass on the rear outputs. For both FRT1 and FRT2 settings, you can choose a high or low effect. If you want to further adjust the settings left or right, you can save the new setting as a custom setting.
Easy EQ Curves: This model has "Super Bass", "Powerful", "Natural", "Vocal", "Custom 1", "Custom 2" and "Flat" preset EQ curves. The "custom" curves are ones that you create and store in memory; a different "Custom 1" curve may be set for each source, and the "Custom 2" curve is one that will be the same for all sources.
3-Band Parametric Equalizer: This unit includes a 3-band parametric EQ with Selectable Q Factor. You may select a low (40, 80, 100 or 160Hz), mid (200, 500, 1k or 2kHz) and high frequency (3.15k, 8k, 10k or 12.5kHz) to boost or cut within a range of -6dB to +6dB. The Q factor (slope of the boost or cut) may be selected from one of the following four options: 2N (narrow), 1N, 1W and 2W (wide). Selecting a narrow (steep) Q factor results in frequencies around the center frequency to be affected less by the boost or cut than they are with a wide Q factor. This feature is useful for taming frequency response problems caused by the dimensions, materials and speaker locations of a vehicle.
Selectable Bass and Treble Cut-off Frequencies: The cut-off frequencies for the bass and treble controls can be set independently of the 3-band parametric equalizer adjustments. The bass cut-off frequency can be set to 40Hz, 63Hz, 100Hz or 160Hz. The treble cut-off frequency can be set to 2.5kHz, 4kHz, 6.3kHz or 10kHz. The bass and treble controls have an adjustment range of -6 to +6.
Adjustable Loudness: You can select "Low", "Mid" or "High" for different levels of loudness compensation.
High-volt RCA Preouts: This unit features 3 pairs of preamp outputs (Front, Rear, and Subwoofer/Non-fading). The preouts have an output voltage of 4 volts, and a low output impedance of 100 ohms, providing a strong, clear signal to your external amplifiers.
Subwoofer/Non-fading Preouts: In addition to the front and rear preamp outputs, there is one set of outputs that may be set for "subwoofer" or "non fading" output. When set to "non fading", the signal is full range and the output level is user selectable from -6 to +6. When set to "subwoofer", the outputs are non fading, and they may be set for normal or reverse phase, 50Hz/80Hz/125Hz low-pass output (slope is 18dB/octave), and the level is user selectable from -6 to +6.
High-pass Filter: When you don't want sound in the subwoofer frequency range output from the front and rear speakers, you may activate the built-in high-pass filter. The HPF has a slope of 12dB/octave and you may select a cutoff frequency of 50Hz, 80Hz, or 125Hz.
Source Level Adjustment (SLA): This function prevents radical leaps in volume when switching between sources. To use this function, you compare the volume level of the different sources (AM, CD/Changer) to the FM level, then you can adjust each source level to match the FM level. Since the reference level is based on the FM volume, SLA is not possible on FM.
Optional Aux Input: When used with item 130CDRB10 (sold separately) or item 130CDRB20 (sold separately), this unit can accept input from an auxiliary source, such as a portable CD or MD player. When item 130CDRB10 is used, a CD changer cannot be connected to this unit. Item 130CDRB20 allows you to connect an optional Pioneer CD changer and an auxiliary source to this unit. You can name the Auxiliary source using Upper and lower case letters, numbers and/or symbols from the Name Edit menu.
Cellular Mute: This feature mutes or attenuates the unit's audio output when a cellular call is received, then restores the level once the call is over. To use this feature, you must have a cellular phone with a muting output that can be connected to the muting input wire (yellow/black lead) of this unit.
Warning Tone: If the front panel is not detached from the head unit within 5 seconds of turning off the ignition, a warning tone will sound. This feature can be turned On or Off.
Entertainment Displays: You can select one of three backgrounds on the LCD screen: Movie Screen (Swimming dolphins on a moonlit night), Picture 1 (still picture depicting dolphins), or Picture 2 (various geometric shapes). The background remains the same regardless of the source you're listening to.
Remote Control: The supplied remote control (CXB9039) has controls for this unit, as well as for an optional Pioneer DVD player/changer. A two-way switch lets you change from audio controls (for this unit) to DVD controls (for the optional unit). When controlling an optional DVD unit, you can switch between controls for a single unit (SDV-P7) or multi-disc unit (XDV-P9). Dimensions: Length=4.834", Width=2.063", Height=0.558".
Multi-CD Controls: In addition to basic disc navigation features, this unit has the following changer controls: pause, disc intro scan, track intro scan, track repeat, disc repeat, all disc repeat, disc random, and all disc random.
ITS (Instant Track Selection) Programming: The ITS function can be used to program automatic playback of up to 99 tracks per disc for up to 100 discs. With changers sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.
Disc Title Memory: Titles of up to 10 characters each can be entered into memory for up to 100 discs.
Disc Title List: This feature allows you to display disc titles that you have entered. From the list, you can select a disc for playback.
CD Text Display: When used with a CD Text compatible Pioneer CD changer, this unit will display the titles of CD Text encoded discs that are played in the changer. The titles can be displayed in a list, and a track can be selected from the list for playback. When playing a CD Text disc on a CD Text compatible changer, you cannot switch to the Disc Title Input mode. CD Text disc titles, artist names and track titles longer than 10 characters may be scrolled to reveal the entire string of text.
CD Sound Quality Adjustment: Using the "COMP" (compression) and "DBE" (dynamic bass emphasis) functions, you can adjust the playback quality of the changer. Each function may be set to one of two levels or off. The "COMP" function compresses the audio signal to eliminate distortions caused by the imbalances between the loudest and softest sounds when played at high volumes. The "DBE" function boosts bass frequencies to give your music a more full sound. Note: For these functions to work, they must be supported by the Pioneer CD changer.
DAB and TV Tuner Controls: If desired, you can add a compatible Pioneer DAB Tuner or a TV tuner to this unit, and the unit will be able to control various functions of the tuner.
DVD Controls: You can add a compatible Pioneer single-disc DVD player or multi-disc DVD changer. The supplied remote has a switch which allows the remote to control a connected DVD player/changer.