About the Pioneer DEH-P7300
The stunning graphics of Pioneer's "Organic EL" display alone will make you glad you've got the DEH-P7300 CD receiver in your dash. The display's high level of resolution allows it to present full-motion screensavers and 3-D setup screens (10 different display modes). Its wide viewing angle makes it easy to see, even when the receiver is mounted low in the dash.
Behind the beautiful exterior, Pioneer has packed this receiver with features. Easy EQ offers 5 unique preset EQ curves, a parametric EQ for fine-tuning, and 2 user presets. Sound Focus EQ improves stereo imaging with separate front and rear speaker tone settings, while the Automatic Sound Levelizer reduces the effects of road noise. Three sets of 4-volt preamp outputs accommodate your plans for system expansion.
This receiver is XM satellite radio-ready you must have a subscription to XM Radio, a Pioneer XM tuner, and an XM-compatible antenna in order to receive the digital satellite radio signal. XM satellite radio offers digital-quality sound, coast-to-coast coverage, and 100 channels of music, news, sports and entertainment, all for $9.99 a month.Details:
- detachable, fold-down face
- Organic EL display
- 3 sets of 4-volt preamp outputs
- CD changer controls
- CD Text
- CD-R and CD-RW compatible
- high-pass and low-pass filters
- spectrum analyzer
- Automatic Sound Levelizer adjusts volume level according the amount of road noise (5 levels of adjustment)
- Supertuner III
- XM radio-ready (You must subscribe to XM Radio to receive the satellite radio signal.)
- wireless remote
- 22 watts RMS/50 peak x 4 channels
- CD frequency response 5-20,000 Hz
- CD signal-to-noise ratio 94 dB
- FM sensitivity 9 dBf
- 1-year warranty
What's in the box:
- AM/FM/CD/Changer controller receiver with 10-amp fuse inserted into chassis
- Trim ring
- Hard face case
- CXB6797 Wireless remote control
- CR2025 Lithium battery
- Wiring harness
- 2 Extraction keys
- 1 Release pin
- 1 Rear support stud
- 1 Rubber bumper
- 4 Pan-head ISO-mount screws
- 4 Countersunk ISO-mount screws
- 2 Fixing screws
- 1 Metal holder
- Operation Manual (English/French)
- Installation Manual (English/French)
- Warranty sheet
- Note on the Demo Mode
- Hands free system note
- XM Radio information booklet
Thanks for submitting your review
More details on the Pioneer DEH-P7300
Features & specs
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||XM|
|RMS Power (CTA-2006)||22 watts|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||50-15kHz|
|Sub Preamp Outputs||Yes|
|Switchable Rear Preamp Outputs||---|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||4 volts|
|Display Color||Organic EL|
|Key Button Color||Green/Blue/Dash lights|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 YEAR|
|Labor Warranty||1 YEAR|
|FM Sensitivity||9 dBf|
|Radio Data System||No|
|Music File Playback|
MOSFET Amplifier: This receiver is equipped with a 50 watts x 4 (peak) MOSFET amplifier for low distortion, high power output. The amplifier is strong enough to power small subwoofers to moderate volume levels in compact cars and pickups. For higher volume levels from subwoofers, an optional amplifier may be connected to the provided sets of preamp outputs.
Organic EL Display: This unit's display is a bright, easy to read full dot matrix display that is capable of showing 3-dimensional images. The display is easily viewed from all angles and its brightness can be set according to lighting conditions or personal preference.
Display/Button Illumination: The tuner frequency, source names, source icons, clock, CD track/time, CD Text information and CD titles are displayed with blue illumination. The select buttons guide is displayed with green illumination. The preset EQ curve names are displayed with orange illumination. There is an orange EQ curve display in the right hand portion of the display that shows the frequency response characteristic of each curve (except the "CUSTOM 1" and "CUSTOM 2" curves). The EQ button is backlit with blue illumination. The remaining buttons are backlit with green illumination, and there is a ring of green illumination around the rotary volume control.
Display Brightness: The display brightness can be adjusted from 0 to 15.
Entertainment Display Modes: You may select one of the following 10 Entertainment Display Modes: Source Icon Display, Background Visual 1 (moving clouds), Background Visual 2 (moving squiggly lines), Background Visual 3 (moving light pattern), Background Visual 4 (moving line drawings), Spectrum Analyzer Mode 1, Spectrum Analyzer Mode 2, Level Indicator, Movie Screen Mode 1 (Formula 1 racing) , and Movie Screen Mode 2 (bird soaring through the sky).
Demo Modes: This unit has a Reverse Demo Mode and a Feature Demo Mode. In Reverse Demo Mode, if you do not perform an operation for a period of 30 seconds, the display begins reversing colors. It continues reversing colors every 10 seconds until a button is pushed. When the unit is turned off, the Feature Demo Mode is activated. The Feature Demo Mode displays the unit's different features and capabilities using moving graphics. In addition, the unit shows the different Entertainment Display modes.
Easy EQ (EEQ) Curves: This model has "SUPER BASS", "POWERFUL", "NATURAL", "VOCAL", "CUSTOM 1", "CUSTOM 2" and "FLAT" preset EQ curves. The "CUSTOM" curves are ones that you create and store in memory; a different "CUSTOM 1" curve may be set for each source, and the "CUSTOM 2" curve is one that will be the same for all sources. There's an EQ curve display in the right hand portion of the display that shows the frequency response characteristic of each curve (except the "CUSTOM 1" and "CUSTOM 2" curves).
3-Band Parametric Equalizer: This unit includes a 3-Band Parametric EQ with Selectable Q Factor. You may select a low (40, 80, 100 or 160Hz), mid (200, 500, 1k or 2kHz) and high frequency (3.15k, 8k, 10k or 12.5kHz) to boost or cut within a range of -6dB to +6dB. The Q factor (slope of the boost or cut) may be selected from one of the following four options: 2N (narrow), 1N, 1W and 2W (wide). Selecting a narrow (steep) Q factor results in frequencies around the center frequency to be affected less by the boost or cut than they are with a wide Q factor. This feature is useful for taming frequency response problems caused by the dimensions, materials and speaker locations of a vehicle.
Selectable Bass and Treble Cut-off Frequencies: The cut-off frequencies for the bass and treble controls can be set independently of the 3-band parametric equalizer adjustments. The bass cut-off frequency can be set to 40Hz, 63Hz, 100Hz or 160Hz. The treble cut-off frequency can be set to 2.5kHz, 4kHz, 6.3kHz or 10kHz. The bass and treble controls have an adjustment range of -6 to +6.
Sound Focus Equalizer (SFEQ): The SFEQ feature is made to enhance the soundstage in the front of the vehicle by increasing the clarity of vocals and instruments. There are two primary SFEQ modes ("FRT1" and "FRT2"), and there is a "CUSTOM" mode. The "FRT1" mode boosts the treble on the front outputs while boosting the bass on the rear outputs; when this mode is selected, treble adjustments affect the front channels only, and bass adjustments affect only the rear channels. The "FRT2" mode boosts the treble and bass on the front outputs while boosting only the bass on the rear outputs; when this mode is selected, treble adjustments affect the front channels only, and bass adjustments affect the front and rear channels. You may select "HI" or "LOW" operation for the "FRT1" and "FRT2" modes; the "HI" setting of each mode provides a more pronounced effect than the "LOW" setting. If you adjust the bass or treble setting while an SFEQ mode is on, the adjustment is applied to the selected SFEQ mode and that setting is kept in memory as the "CUSTOM" SFEQ mode. The SFEQ feature also includes a seating position setting that helps tailor the sound to where people are sitting in the vehicle.
Adjustable Loudness: You may select from three levels (Low, Mid or High) of loudness compensation.
Subwoofer/Non-fading Preamp Outputs: In addition to the front and rear preamp outputs, there is one set of outputs that may be set for "subwoofer" or "non-fading" output. When set to "non-fading", the signal is full range and the output level is user selectable from -6 to +6. When set to "subwoofer", the outputs are non-fading, and they may be set for normal or reverse phase, 50Hz/80Hz/125Hz low-pass output, and the level is user-selectable from -6 to +6.
Full-range and Subwoofer Rear Output Modes: The rear speaker and preamp outputs may be set for full-range or subwoofer operation. When subwoofer operation is selected, you can connect a subwoofer directly to the rear speaker leads without using an external amplifier. When a mode is selected, it affects the speaker and preamp outputs simultaneously; it is not possible to put the rear speaker outputs in one mode and the rear preamp outputs in another mode.
High-Pass Filter: When you don't want sound in the subwoofer frequency range output from the front and rear speaker and preamp outputs, you may activate the built-in high-pass filter. You may select a filter frequency of 50Hz, 80Hz, or 125Hz.
Source Level Adjustment (SLA): This function prevents radical leaps in volume when switching between sources. To use this function, you compare the volume level of the sources (AM, CD, CD changer, AUX) to the FM level, then you adjust the source level to match that heard when listening to FM. Since the reference level is based on the FM volume, SLA is not possible on FM.
XM Satellite Radio Tuner Compatible: This unit can control the optional Pioneer XM tuner (sold separately). The optional tuner will allow you to receive XM Satellite Radio. XM Satellite Radio programming will feature up to 100 channels of digital-quality music, news, talk, sports, entertainment, and children's programming. XM will transmit these channels from its studios directly to consumers nationwide via two high-powered commercial satellites. For monthly subscription fee, you will be able to receive the XM signal in your car and home using small car phone-sized antennas and XM-capable radios.
Rotary Volume Control: A rotary volume control allows for easy volume level adjustment.
Tuner: This unit is equipped with Pioneer's remarkable Supertuner III tuner, which provides outstanding AM and FM performance.
CD Compatibility: This unit will play prerecorded CDs, finalized CD-R discs, and finalized CD-RW discs.
CD Text display: This unit will display the titles of CD Text encoded discs that are being played. When playing a CD Text disc, you cannot switch to the Disc Title Input mode. CD Text disc titles, artist names and track titles longer than 10 characters may be scrolled to reveal the entire string of text.
Disc Title Memory: Titles of up to 10 characters each can be entered into memory for up to 48 discs. When a compatible changer is connected, titles of up to 10 characters each can be entered into memory for up to 100 discs in the changer.
CD-R/CD-RW Skip Function: Some CD-R/W recorders allow you to assign skip ID tags to tracks that you never want to hear. When a track has been assigned a track skip ID, compatible units will recognize the skip ID information and skip over that track. This player recognizes track skip IDs, so CD-R and CD-RW discs with skip ID information will be played back as intended.
Dimmer Feature (Illumination Wire Info): When the illumination wire of this unit receives power and the dimmer feature has been turned on in the "Initial Setting" menu, the display will dim to a preset level. Note: When the power and constant wires are connected and the illumination wire is supplied with voltage (when you turn your lights on), the button illumination remains on even if the unit is turned off completely.
Optional Aux Input: When used with item 130CDRB10 (sold separately) or item 130CDRB20 (sold separately), this unit can accept input from an auxiliary source, such as a portable CD or MD player. When item 130CDRB10 is used, a CD changer cannot be connected to this unit. Item 130CDRB20 allows you to connect an optional Pioneer CD changer and an auxiliary source to this unit.
Automatic Sound Levelizer (ASL): During driving, road noise in the car changes according to the driving speed and road conditions. The Automatic Sound Levelizer monitors the road noise and automatically increases the unit's volume level, if the road noise becomes greater. The sensitivity of this feature can be set to one of five levels.
Cellular Mute: This feature mutes the unit's audio output when a cellular call is received, then restores the level once the call is over. To use this feature, you must have a cellular phone with a muting output that can be connected to the muting input wire (yellow/black lead) of this unit.
Hands Free Telephoning Function: When a call is made or received using a hands free telephone, sound from the system is muted automatically and the voice of the person on the other end comes through the car speakers. For this feature to work, your hands free system must have a telephone and Mic output, which connects to the "TEL INPUT" and "MIC INPUT" on this unit. The "TEL INPUT" is a female threaded input and the "MIC INPUT" is a female mini-jack input. Note: The "MIC INPUT" cannot be used as an auxiliary input.
Warning Tone: If the detachable face is not removed within 5 seconds of turning the ignition off, a warning tone will sound. This feature can be turned On or Off.
- Disc Skip: Forward and reverse.
- Track Skip: Forward and reverse.
- Track Search: Audible forward and reverse search.
- Direct Disc Access: Discs 1-12 may be accessed directly using the preset buttons.
- Repeat Play: One-track Repeat, Disc Repeat and Multi-CD player Repeat (magazine repeat).
- Random Play: Disc random play or magazine random play (tracks may be played more than once).
- Scan Play: Scan Play can only be used in conjunction with Repeat Play. In Disc Repeat mode, the beginning of each track on the selected disc is scanned for approximately 10 seconds. In Multi-CD player Repeat mode, the beginning of the first track on each disc is scanned for approximately 10 seconds.
- ITS (Instant Track Selection) Programming: The ITS function can be used to program automatic playback of up to 24 tracks per disc for up to 100 discs.
- Disc Title Memory: Titles of up to 10 characters each can be entered into memory for up to 100 discs.
- Disc Title list: Allows you to display disc titles you have input and select from the title list to play desired disc.
- CD Text display: When used with a CD Text capable Pioneer CD changer, this unit will display the titles of CD Text encoded discs that are played in the changer. When playing a CD Text disc on a CD text compatible changer, you cannot switch to the Disc Title Input mode. CD Text disc titles, artist names and track titles longer than 10 characters may be scrolled to reveal the entire string of text.
- CD Sound Quality Adjustment ("COMP"): Includes the "COMP" and "DBE" functions. The "COMP" function may be set to one of two levels or off; this function compresses the audio signal to eliminate distortions caused by the imbalances between the loudest and softest sounds when played at high volumes. The "DBE" (dynamic bass emphasis) boosts bass frequencies to give your music a more full sound. Note: For this feature to work, the Pioneer CD changer must support this function!
Note: You cannot use the "Ejecting a Single Disc", "Frequency Play", "Music Group Play", or "ABC Disc Title Search" 50-disc CD changer functions with this unit.
Remote: This unit comes with the Pioneer CXB6797 wireless remote.
- Volume +/- Buttons: Adjusts the volume up or down
- Function Button: Cycles through functions that allow you to set best station memory, local, CD track scan, CD pause, repeat, random etc
- Audio Button: Allows you to access EQ, Loud, SLA, Fader, bass and treble settings
- Cursor Buttons (up/down/left/right): Used for track/station seek and to set levels within menus
- Escape/Band Button: Cycles through tuner bands and allows you to exit from the current menu
- CD Button: Used to select CDs for playback
- Pause Button: Pauses CD playback
- Tuner Button: Selects tuner as source
- ATT (Mute) Button: Reduces volume by 90%
Dimensions: L=3.627", W=1.406", H=0.351"
Note: This unit is also compatible with Pioneer's optional steering wheel remote (item 130CDSR80).
Display Illumination/Clock Display: When the Time Display has been turned on, pressing and holding the source button turns off audio output, but the clock display and face/button illumination remain on. When the Time Display has not been turned on, pressing and holding the source button turns the unit off completely. This unit's illumination and clock are "keyed" only when the Time Display has been turned on. When power is supplied to both power wires and the illumination wire is not receiving voltage, nothing illuminates if the Time Display has not been turned on and the unit is off. Note: When the power and constant wires are connected and the illumination wire is supplied with voltage (when you turn your lights on), the button illumination remains on even if the unit is turned off completely.
Installation Depth Note: The depth measurements in the Specs table were taken without an RCA patch cable plugged into the back of the unit. With an RCA cable connected, the "I" depth measurement is 7.056" and the "E" depth measurement is 6.783".