About the Pioneer GM-5200T
Upgrade your in-car listening experience with a Pioneer GM Series amp — it'll provide the power and sound quality you're looking for, all in a reliable package you can count on.
The GM-5200T 2-channel amplifier produces plenty of raw energy, with a selectable frequency filter that makes this amp a natural for driving a subwoofer. A selectable bass boost allows you to crank in more thump when needed. Thanks to high- and low-level inputs, you can add the GM-5200T to almost any system, even a factory stereo.
Product highlights:
- 2-channel car amplifier
- 125 watts RMS x 2 at 4 ohms (190 watts RMS x 2 at 2 ohms)
- 380 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
- selectable low-pass filter (80 Hz, 12 dB per octave)
- selectable bass boost (0, 6, 12 dB at 50 Hz)
- CEA-2006 compliant
- speaker- and preamp-level inputs
- fuse rating: 30A x 2
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 13-1/4"W x 2-3/8"H x 11-13/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GM-5200T
What's in the box:
Pioneer GM-5200T owner's manual
- Two-channel amplifier
- Speaker-to-line level adapter
- 4 Self-tapping screws
- Owner's Manual
- Warranty sheet
- Additional Information sheet
Featured review
I have this bridged to a 10" Sony P5, and it sounds great. It is in a small cabin ('03 Jeep Wrangler hartop) and I am very pleased with it. It provides tight bass, with a nice low bite.
JP from Rogers, AR
12 reasons to shop with us
#8
Hands-on product research
The most accurate info around.
REVIEWS
Customer reviews
Loading reviews...
Pioneer GM-5200T reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Pioneer GM-5200T
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) |
125 x 2 | |
| Peak Power Output (Watts x Channels) | 760 x 1 | |
| Power at 2 Ohms (Watts x Channels) | 190 x 2 | |
| Bridged Power (Watts x Channels) | 380 x 1 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | 2 | |
| Minimum Impedance | 2 | |
| Best Frequency Response | 10-50kHz Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 75 dB | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | AB | |
| Low-Pass Crossover Frequency | 80 Hz | |
| Low-Pass Slope (dB/octave) | 12 db | |
| High-Pass Crossover Frequency | N/A | |
| High-Pass Slope (dB/octave) | N/A | |
| Bass Boost | 0, 6, 12 dB | |
| Bass Boost Frequency | 50 Hz | |
| Fan Cooled | No | |
| Fuse Rating | 30 x 2 | |
| Speaker Level Inputs | Harness | |
| Preamp Outputs | No | |
| Width (inches) | 13-1/4 | |
| Height (inches) | 2-3/8 | |
| Depth (inches) | 11-13/16 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Controls
Inputs and Outputs
Cosmetics: The amplifier is black with a silver Pioneer logo and grey lettering. The side panels are grey with white lettering.
Internal Crossover: The built-in crossover can be set for low-pass operation or turned off for full-range output. The crossover is fixed at 80Hz and has a slope of 12dB/octave.
Power Indicator Light: The power indicator lights up when the power is switched on so you know when the amp is getting power.
Bridgeable: The amplifier is bridgeable down to one channel to maximize output when running a single sub or combination of subs.
Left Side of Amplifier:
- Crossover Switch: Allows you to select low-pass or full-range operation for the crossover. For subwoofers you would select the LPF position and for full range speakers you would select the off position.
- Gain Control: Allows you to adjust the input sensitivity of the preamp inputs from 0.4 to 6.5 Volts to maximize sound quality. When using an RCA equipped car stereo (standard output of 500mV), set the gain control to the "Normal" setting. When using an RCA equipped head unit with max. output of 4V or more adjust gain level to match the car stereo's output level. When using the speaker level inputs, turn the gain control counter-clockwise if you hear too much noise.
- Bass Boost: Bass Boost level control will boost the level of low frequencies around 50Hz by selecting either 0, 6, or 12 dB.
Right Side of Amplifier:
- BFC (Beat Frequency Control) switch: If you hear a beat while listening to an AM broadcast with your car stereo, change the BFC switch using a small standard tip screwdriver. Switch is located to the right of the speaker output terminals.
Left Side of Amplifier:
- Input: Pair of stereo RCA jacks
- Speaker Input: Speaker Level Input allows you to hook the GM-5200T to an OEM/Factory Head-unit or any head-unit that does not typically have RCA outputs without having to purchase optional adapters. (adapter plug included)
Right Side of Amplifier:
- Power: Screw terminal (0.625" wide)
- GND (ground): Screw terminal (0.625" wide)
- System Control (remote turn-on): Screw terminal (0.3125" wide)
- Speakers: Screw terminals (each terminal is 0.3125" wide). Bridged operation uses the right(-) and left(+) speaker terminals.
- Fuses: Two 30-amp blade fuses
Loading accessories...
Customer Q&A
Loading articles...
