About the Pioneer RD-RGB150A
If your dash is too shallow for a conventional radio or you're doing a stealth install, you may need more cable length when installing a Pioneer DMH-C head unit. This Pioneer RD-RGB150A extension cable provides an additional 59" DIN/RGB cable plus power and ground wires, as well as a 29.5" antenna extension cable. Warranty: 1 year.
What's in the box:
- 63" RGB extension cable
- 5' Wiring harness
- 31" Antenna extension cable
- Disposal note
Pioneer RD-RGB150A reviews
Thanks for submitting your review
More details on the Pioneer RD-RGB150A
RGB Extension Kit: The Pioneer RD-RGB150A is an RGB Extension Kit consisting of a 63" RGB cable, 31" antenna adapter cable, and 5' wiring harness that allows the remote installation of the hideaway chassis body and touchscreen monitor for a Pioneer modular receiver; including the DMH-C5500NEX, DMH-C2550NEX, and DMH-C2500NEX.
- 63" Extension Cable: One end of the cable plugs into the compatible Pioneer modular receiver's chassis body and the other end into the Pioneer modular receiver's touchscreen monitor.
- 31" Antenna Adapter Cable: On one end of the antenna adapter is a male motorola plug that plugs into the Pioneer modular receiver's hide-away chassis body. On the the other end of the antenna adapter is a female motorola plug which connects to your vehicle's antenna cable.
- 5' Wiring Harness: The included 5' wiring harness replaces the wiring harness that comes with the Pioneer modular receiver and plugs into the hide-away chassis body.
Wiring Harness Chart:
|Black 16-Pin Connector|
|Pin #||Wire Color||Function|
|1||Yellow||+12 Volt Constat|
|2||Red||+12 Volt Accessory|
|4||Light Green||Parking Brake|
|5||Green/Black||Left Rear Speaker Output (-)|
|6||Green||Left Rear Speaker Output (+)|
|7||White/Black||Left Front Speaker Output (-)|
|8||White||Left Front Speaker Output (+)|
|13||Violet/Black||Right Rear Speaker Output (-)|
|14||Violet||Right Rear Speaker Output (+)|
|15||Gray/Black||Right Front Speaker Output (-)|
|16||Gray||Right Front Speaker Output (+)|