About the Pioneer TS-SW841D
Pioneer's innovative TS-SW841D 8" subwoofer packs a punch that belies its slender cross-section. Its Air Suspension Control System eliminates the need for a conventional spider structure. Instead, a cushion of locked-in air acts like a spring, providing smooth, precise movement of the woofer. This special design keeps the total depth of the sub comfortably under 3", for bold bass in places regular subwoofers can't fit.
The one-piece die-cast aluminum basket sports a radical fin design that provides extra cooling and rock-solid resonance control. Rugged internal parts, a powerful strontium magnet, and a cone-reinforcing aluminum dust cap round out the package. Pair this sub with a special low-profile enclosure from Pioneer to get the most out of this slender powerhouse.
Priced per speaker
- 8" 4-ohm shallow subwoofer
- carbon and glass fiber reinforced IMPP cone with woven-fiber surround
- Air Suspension Control System eliminates traditional spider structure
- cast aluminum basket
- strontium magnet
- power range: 50-120 watts RMS (500 watts peak power)
- frequency response: 30-1,500 Hz
- sensitivity: 85 dB
- mounting depth: 2-9/16"
- sealed box volume: 0.15-0.5 cu. ft.
- ported box volume: 0.15-0.5 cu. ft.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-SW841D
What's in the box:
- One 8" Pioneer shallow mount subwoofer
- 6 Self-tapping screws (5mm x 30mm)
- Manual (English/ Spanish/ French)
- Warranty information
- Template on box flap
Pioneer TS-SW841D reviews
Thanks for submitting your review
More details on the Pioneer TS-SW841D
Features & specs
|Cone Material||Carbon Fiber/IMPP|
|Surround Material||3-Layer Woven Fiber|
|Ideal Sealed Box Volume (cubic feet)||0.4|
|Ideal Ported Box Volume (cubic feet)||0.4|
|Port diameter (inches)||2.5|
|Port length (inches)||6|
|Dual Voice Coil||No|
85 dB at 1 watt |
|Frequency Response||30 - 1500 Hz|
|Max RMS Power Handling||120|
|Peak Power Handling (Watts)||500|
|Top Mount Depth (inches)||2 9/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||7 1/4|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are designed to provide wider installation options for a broad range of vehicles. They can be mounted behind or under the seats of many vehicles. The TS-SW841D has interlaced Carbon/Glass fiber reinforced IMPP (Injection Molded Polypropylene) composite cones. This cone design is lightweight and rigid, resulting in clean, powerful bass response.
Air Suspension System: Rather than using a standard spider to control cone movement, Pioneer created an Air Suspension system; using two cones with a sealed air space between them. The air locked between the main and drive cones creates a spring-like effect between them moving in unison. The dual cone structure maintains better linearity, resulting in consistently clear, powerful, wide ranging bass response. The drive cone also deflects air pressure inside the enclosure, which further contributes to the bass output of the small package.
Cast Aluminum Basket: The one-piece cast aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design include reduced internal stress, superior damping, and increased magnetic efficiency.
Surround: The two cones use three-layer, fiber-woven, M-shaped radial surrounds to attach to the basket and form the Air Suspension System. This design keeps the voice coil centered, even under high power, for clear and powerful bass.
Terminals: The spring compression binding post terminals will accept a pin connector, a single banana plug, or bare wire up to 10 gauge.
Sealed Box Volume: The sealed box sizes recommended by Pioneer range from 0.15 ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³.
Vented Box Volume: The vented box sizes recommended by Pioneer range from 0.25ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³. The ideal port size for a 0.4 ft³ enclosure is 2.5" diameter x 6" long.
Single Reflex Bandpass Volume: The bandpass box sizes recommended by Pioneer range from 0.25 ft³ per chamber to 0.4 ft³ per chamber; within this range the ideal size is 0.35 ft³ per chamber. One 3" diameter x 6" long port should be used in an enclosure with 0.35 ft³ chambers.
Infinite-Baffle Operation: The woofer is also optimized for infinite-baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure.
3 questions already asked