About the Pioneer TS-A1702C
Pioneer A-Series component speaker systems offer high-quality sound and powerful playback, with the strong stereo image that only separate components can provide. The tough woofers pound out the low frequencies, the separate tweeters open up the sound with detailed highs, and the external crossovers make sure that every note's in perfect balance.
The TS-A1702C system includes 6-3/4" woofers made from polypropylene laced with Aramid, a synthetic fiber used in bullet-proof vests. Add in butyl rubber surrounds, and you can count on these woofers to pump out strong bass for years to come. You can surface- or flush-mount the component tweeters, and you can swivel them after installation to face your listening position.
This Pioneer component system's wide frequency response, strong power handling, and "aim-ability" give your music an incredible live image. You can drive this efficient component system with your car stereo, but it'll reach its full potential when paired with an outboard amplifier.
Product highlights:
- component speaker system includes two 6-3/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
- injection-molded carbon graphite polypropylene with Aramid woofers
- butyl rubber surrounds
- 7/8" Tetron soft dome tweeters
- 2-way external crossovers
- 4-ohm impedance
- 2-50 watts RMS power range (230 watts peak)
- frequency response: 31-35,000 Hz
- sensitivity: 90 dB
- includes adapter rings for 6-1/2" and 6"x8" and 5"x7" openings
- depth: 2-1/2"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A1702C
What's in the box:
Pioneer TS-A1702C owner's manual
- Two 6-3/4" woofers
- Two 7/8" soft-dome tweeters with attached 10" speaker leads terminated by female and male quick-connects
- 2 Passive crossovers 2 Grilles
- Two 6-1/2" speaker adapter bracket lift rings
- Two 6x8" speaker adapter brackets
- 2 Surface-mount cups
- 2 Factory-mount cups
- 2 Metal flush-mount clamps
- Two 3mm x 4mm machine screws
- Two 4mm x 14mm phillips-head screws
- Eight 4mm x 8mm machine screws
- Eight 4mm x 20mm phillips-head black screws
- Eight 4mm x 20mm phillips-head silver screws
- 8 Metal speed-clips
- 2 Wire-ties
- 1.125" x 18.5" Self-adhesive foam gasket strip
- 2 Circular pieces of two-side tape
- Warranty Information
- Specifications and Cut-Out Template on box
Featured review
Great sound from the speakers, I cannot believe the difference in sound and I didnt spend much money
chuckk from buffalo ny
12 reasons to shop with us
#7
In-depth vehicle research
The world's largest car fit database.
REVIEWS
Customer reviews
Loading reviews...
Pioneer TS-A1702C reviews
Average review:
Thanks for submitting your review
Customer photos
Submit a review and then enter to win a $350 rewards card
Review this product
More details on the Pioneer TS-A1702C
Features & specs
| General | ||
|---|---|---|
| Speaker Size | ||
| Design | 2-way | |
| Tweeter Design | Soft dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Tetron | |
| Woofer Composition | Carbon graphite IMPP | |
| Woofer Surround | Butyl rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 90 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 31 - 35k Hz | |
| Minimum RMS Wattage | 2 | |
| Maximum RMS Wattage | 50 | |
| Peak Power Handling (Watts) | 230 | |
| Top-mount Depth (Inches) | 2 1/2 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 1/2 | |
Product Research
Woofers
IMPP Woofer: Each 6-3/4" cone woofer is made from interlaced dual Aramid fiber-reinforced Carbon Graphite IMPP (Injection Molded Polypropylene). With long dual Aramid fibers interlacing together inside, this Carbon Graphite IMPP cone design provides the strength and rigidity powerful bass sound requires. The high-density, compressed internal architecture is resilient and stacks up against high power and transfers sound very quickly. The result is full-bodied, rich sound.
Surrounds: For durability and a smoother response, each woofer uses a butyl rubber surround.
Grilles: The TS-A1702C comes supplied with a set of speaker grilles that feature a plastic silver ring and a black metal mesh insert. The supplied grilles are designed for when the woofers are installed in aftermarket 6-3/4" openings.
Mounting: The TS-A1702C's woofers can be mounted in a standard 4-hole 6-3/4" opening without the use of a bracket. In addition, the woofers can be mounted in a standard 3-hole 6-1/2" opening with the use of the supplied 6-1/2" speaker adapter 1/2" lift rings. The woofers can also be mounted in a standard 6x8" opening or a Ford/Mazda 5x7" opening using the supplied 6x8"/6x8C adapter brackets.
Tweeters
Soft-Dome Tweeter: The TS-A1702C features two 7/8" soft-dome tweeters with magnetic fluid and Neodymium magnets for efficient, crisp, clear highs.
Mounting: The tweeters can be flush mounted using the supplied metal clamps. The supplied plastic mounting cups allow you to surface mount the tweeters in an aftermarket location or mount the tweeters in a factory tweeter location behind a factory installed grille. The surface mounting cup lets you position the tweeter at 50-degree or 75-degree angle. Once installed the tweeters do not swivel. The surface mounting cups attach to a flat, clean surface of your vehicle with the supplied two-sided tape.
Tweeter Mounting Dimensions:
| Factory Mount | Angled Surface Mount | Flush Mount | |
| Mounting Height | 0.585" | 1.703 (75-degree angle) | 0.4375" |
| Depth | 0.935" | 1.422" (50-degree angle) | 1.035" |
| Frame Diameter | 1.992" | 1.912" | 1.912" |
| Cutout Diameter | 1.569" | N/A | 1.569" |
Crossovers
Passive Crossover Network: The TS-A1702C features one outboard passive crossover module for each woofer/tweeter combination. The two outboard crossover modules feature a fixed low-pass and high-pass filter with a -12 dB/Oct slope.
Crossover Connections: The passive crossover utilizes attached speaker leads to connect the crossover to your amplifier and the supplied woofer and tweeter.
- Amplifier: 17.5" attached speaker lead terminated with bare-tinned wire for connecting the crossover to your amplifier's speaker output.
- Woofer: 17.5" attached speaker lead terminated with one large (positive) and one small (negative) male quick-slide connector for connecting the crossover to the supplied 6-3/4" woofer.
- Tweeter: 37" attached speaker lead terminated with one female (positive) and one male (negative) quick-slide connector for connecting the crossover to the supplied 7/8" tweeter.
Mounting: There are two supplied zip-ties for mounting the crossovers in your vehicle.
Crossover Dimensions: Width = 1.725", Height = 0.855", Depth = 2.575"
The Pioneer TS-A1702C replaces these items
- injection-molded carbon graphite polypropylene with Aramid woofers
- 7/8" Tetron soft dome tweeters
- 2-50 watts RMS power range (230 watts peak)
Loading accessories...
Customer Q&A
Loading articles...
