About the Pioneer TS-A2500LS4
A shallow-mount sub that rocks
A shallow-mount sub that rocks
Pioneer's TS Series shallow-mount subs bring great bass to vehicles where conventional subs won't fit. Their low profile allows the use of slender enclosures that'll fit behind a truck seat or in any tight space while delivering the bass performance you need. The TS-A2500LS4 10" shallow-mount sub handles up to 300 watts with a mounting depth of just 3-1/4".
The TS-A2500LS4 features an oversized, glass fiber and mica reinforced polypropylene cone that moves more air and delivers accurate bass. The sub works best in a small sealed enclosure, making it ideal for fitting those tight spaces in today's smaller vehicles.
Product highlights:
- 10" 4-ohm shallow subwoofer
- glass fiber and mica reinforced polypropylene cone with rubber surround
- grille not included
- power handling: 100-300 watts nominal (1,200 watts peak power)
- frequency response: 20-900 Hz
- sensitivity: 85 dB
- sealed box volume: 0.35-0.7 cubic feet
- ported box volume: 0.5-0.7 cubic feet
- cutout diameter: 9"
- top-mount depth: 3-1/4"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A2500LS4
What's in the box:
Pioneer TS-A2500LS4 owner's manual
- One 10" Subwoofer
- Trim ring
- Six 1-1/8" Screws
- Adhesive backed foam gasket
- Manual (English/ German/ French/ Spanish/ Portuguese/ Italian/ Russian)
- Warranty information
- Enclosure recommendations printed on the box
REVIEWS
Customer reviews
Loading reviews...
Pioneer TS-A2500LS4 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Pioneer TS-A2500LS4

Features & specs
Size | 10 -inch | |
Impedance | 4 ohms | |
Cone Material | Glass Fiber/Mica Reinforced IM | |
Surround Material | Rubber | |
Ideal Sealed Box Volume (cubic feet) | 0.6 | |
Ideal Ported Box Volume (cubic feet) | 0.6 | |
Port diameter (inches) | 3 | |
Port length (inches) | 7.5 | |
Free-Air | Yes | |
Dual Voice Coil | No | |
Sensitivity |
85 dB at 1 watt | |
Frequency Response | 20 - 900 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 1200 | |
Top Mount Depth (inches) | 3 1/2 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/16 | |
Vas (liters) | 17.9 | |
Fs (Hz) | 38 | |
Qts | 0.83 | |
Xmax (millimeters) | 8.3 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Woofer Cone: Pioneer uses a glass fiber and mica reinforced injection molded polypropylene (IMPP) cone, making it more rigid than polypropylene alone.
Shallow Mount Woofer: Pioneer's "Shallow-Mount" subwoofers are designed to provide wider installation options for a broad range of vehicles. They can be mounted behind or under the seats of many vehicles.
Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 8 gauge.
Sealed Box Volume: Pioneer recommends a sealed enclosure with an internal volume between 0.35 ft³ and 0.7 ft³, with an ideal volume of 0.6 ft³. Sealed enclosures provide the most control over the woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box Volume: The recommended ported box volume ranges from 0.5 ft³ to 0.7 ft³, with the ideal size being 0.6 ft³, using a single 3" diameter x 7½" long port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, maximizing bass output for a given amplifier.
Free-Air: The woofer can also be mounted in free air to a baffle board (infinite baffle, no enclosure). When mounted in free air, the power handling is reduced by 75% (to 75 watts RMS).
Measurements: When mounting the woofer without the trim ring, the dimensions change as follows:
- Mounting Height: 0.542"
- Flange Height: 0.19"
- Frame Diameter: 10.305"
Loading accessories...
Customer Q&A
3 questions already asked
Loading articles...