About the Pioneer Stage 4 TS-C132PRS
Pioneer Stage 4 PRS Component Speaker System
Pioneer Stage 4 PRS Component Speaker System
Pioneer PRS Series component speaker systems deliver superb sound with a wide open soundstage, so you'll hear your music faithfully reproduced and in perfect balance throughout your car's interior. Pioneer designed these component speakers as part of their Stage 4 System, along with the DEX-P99RS receiver, PRS Series amplifiers, TS-S062PRS midrange speakers, and the TS-W252PRS subwoofer, to deliver uncompromised sound quality in your vehicle.
Three-layer cones for tough bass
Multi-layered cone material
The TS-C132PRS component system features a 5-1/4" woofer with an exceptionally rigid cone made from polypropylene, Aramid fibers, and glass fibers. The woofer's lightweight micro-fiber surround — Pioneer calls it "artificial suede" — holds its shape even when the speaker's driven hard, so you'll enjoy strong, accurate performance. An aluminum center plug improves sound dispersion and dissipates heat for a longer life.
Cutaway view of PRS tweeter
Wide high-frequency performance
Each 1-1/8" polyester soft dome tweeter features a sealed chamber that extends its frequency response much lower than the typical tweeter, for a better transition from the lows to the highs. The lower crossover point also helps to open up the sound as more sonic details are broadcast from the tweeter.
The TS-C132PRS system includes outboard 2-way crossovers built with audiophile-grade components to ensure the highest fidelity. You can choose between two tweeter levels to adjust for the most natural sound in your vehicle. Pioneer put decades of car audio experience to work in creating these components, so power them up with a suitable Pioneer PRS amp and enjoy stunning sound quality as you drive.
Pioneer's Stage 4 System
Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.
Product highlights:
- component speaker system includes two 5-1/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
- 3-layer woofer cone (glass fiber, polypropylene/Aramid fiber, Aramid fiber)
- artificial suede (micro-fiber) surrounds
- 1-1/8" soft dome tweeters
- 2-way external crossovers with 2-level tweeter control
- 4-ohm impedance
- 5-30 watts RMS power range (150 watts peak)
- frequency response: 30-35,000 Hz
- sensitivity: 86 dB
- depth: 2-1/4"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # ts-c132prs
What's in the box:
Pioneer Stage 4 TS-C132PRS owner's manual
- 2 Woofers
- 2 Tweeters with 20" speaker wires attached
- 2 Crossovers
- 2 Woofer grilles
- 2 Grille mounting rings
- 2 Surface-mount cups
- 2 Factory-mount cups
- 2 Metal flush-mount clamps
- Two M3 x 6mm Machine screws
- Four 1/2" Self-tapping screws
- Twelve 1" Self-tapping screws
- 8 Speed clips
- Instruction manual
- Warranty information
Reviews
Customer reviews
Loading reviews...
Pioneer Stage 4 TS-C132PRS reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer Stage 4 TS-C132PRS
Features & specs
| General | ||
|---|---|---|
| Speaker Size | ||
| Design | 2-way | |
| Tweeter Design | 1-1/8" Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Tetron | |
| Woofer Composition | Aramid/Poly/Glass | |
| Woofer Surround | Artificial Suede | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 86 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 30 - 35k Hz | |
| Minimum RMS Wattage | 5 | |
| Maximum RMS Wattage | 30 | |
| Peak Power Handling (Watts) | 150 | |
| Top-mount Depth (Inches) | 2 1/4 | |
| Bottom-mount Depth (Inches) | 2 1/2 | |
| Cutout Diameter or Length (inches) | 4 3/4 | |
| Mounting Height (Inches) | 0.401 | |
Product Research
Woofers
IMX Woofer: Pioneer's proprietary 3-Layer IMX (Injection Molded Matrix) cones are rigid yet lightweight; they significantly reduce mid-to-low range distortion and reproduce a natural sound stage. The woofers' set screw terminals accept bare wire up to 12 gauge.
Tweeters
Soft-Dome Tweeter: The TS-C132PRS component set includes two 1-1/8" soft-dome tweeters with dual neodymium magnets (total weight 0.75 ounces). Pioneer extends tweeter performance to a lower frequency than is typical, creating fuller midrange fidelity and clear, accurate vocals.
Mounting: The tweeters can be flush-mounted using the supplied metal clamps. The supplied plastic mounting cups allow you to surface mount the tweeters in an aftermarket location or mount the tweeters in a factory tweeter location behind a factory installed grille. The surface mounting cups let you position the tweeters at one of two angles, approximately 45° or 15°. Once installed, the tweeters do not swivel.
Tweeter Mounting Dimensions:
| Factory Mount | Angled Surface Mount | Flush Mount | |
| Mounting Height | N/A |
1.627" (15° angle) 1.872" (45° angle) | 0.587" |
| Depth | 1.464" | Screw depth | 0.632" |
| Frame Diameter | 2.257" | 2.159" | 2.17" |
| Cutout Diameter | N/A | N/A | 1.77" |
Crossovers
Passive Crossover Network: The TS-C132PRS features an audiophile-grade outboard passive crossover module for each woofer/tweeter combination. The crossover modules are 2-way with a crossover point of 1,950 Hz and 12dB/octave slope.
Crossover Connections: The gold-plated set screw input and output terminals will accept bare wire up to 12 gauge. Note: No speaker wire or quick slides are provided with the speakers.
Tweeter Level Control: The crossover provides three tweeter level output options; -3 dB, 0 dB (flat), and +3 dB.
Mounting: There are four supplied self-tapping screws for mounting the crossovers in your vehicle.
Crossover Dimensions:
- Width: 5.25"
- Height: 3.625"
- Depth: 3.5" (plus wire thickness)
The Pioneer Stage 4 TS-C132PRS replaces these items
- 5-1/4" aerated poly woofers
- 7/8" ring radiator tweeters
- 50-100 watts RMS power range
- dual layer woofer cone (injection-molded polypropylene with outer basalt fiber/Aramid skin)
- 1-1/8" polyester soft dome tweeters
- 2-35 watts RMS power range (180 watts peak)
- component speaker system includes two 5-1/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
- 3-layer woofer cone (glass fiber, polypropylene/Aramid fiber, Aramid fiber)
- 1-1/8" polyester soft dome tweeters
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
most beautiful sounding speakers I've ever had the pleasure of owning. Absolutely love them. I paired them with the pioneer 2 5/8" midrange. Ran actively off two jbl-Msa-1004 and a Jbl ms-8 processor. Beautiful sounds and beautiful looks
jbiddle from Redwood valley. California