Name: Pioneer TS-D65C
Brand: Pioneer
SKU: 130TSD65C
Price: 159.99 USD
Availability: InStock
Rating: 4.5 (31 reviews)

OVERVIEW

Step up to Pioneer components

It's the right time to step up to new speakers — these D Series car speakers deliver superior Pioneer quality at a competitive price. Designed to provide a smooth and open sound that's miles above your factory speakers, the TS-D65C 6-1/2" component speaker system gives you low distortion and unfailing performance, even under the harsh conditions of living in your car doors.

KEEP READING

Step up to Pioneer components

Sweet highs and hearty lows

Pioneer infuses the D Series polypropylene woofer cone with strong aramid fibers, making it both durable and incredibly responsive for the best bass experience possible. A coated textile dome tweeter ensures the excellent high-frequency performance you've been craving, while an inline crossover means you won't have any extra gear to stash in your doors or dash. Prepare for crisp, musical detail and a new, impactful soundstage across your dash that will take enjoyment of your music to the next level — especially if you power these speakers with an aftermarket amplifier.

Fine tuning

Tweeter placement is crucial for vivid, precise playback — that's why Pioneer includes a unique swivel mount with this component system that lets you precisely aim your music's high frequencies. Flush-, surface-, and bracket-mounting hardware gives you more options for installing your tweeters.

READ LESS

Product highlights:

component speaker system includes two woofers and two tweeters
6-1/2" injection-molded polypropylene woofer cone interlaced with aramid fibers
1" polyester soft dome tweeter with inline crossover
handles up to 90 watts RMS (270 watts peak power)
frequency range: 32-49,000 Hz
sensitivity: 84 dB
woofer top-mount depth: 2-5/8"
impedance: 4 ohms
grilles included
warranty: 1 year
Our 60-day money-back guarantee
MFR # TS-D65C

What's in the box:

Pioneer TS-D65C owner's manual

Two woofers
Two tweeters (with attached 4" speaker leads terminated with quick-connects)
2 Lengths of speaker wire (each has quick slides to connect to the woofer a 40" tweeter output leg with integrated crossover and an 11" input leg)
2 Woofer grilles
2 Flush mount tweeter housings (with tweeters installed)
2 Factory tweeter mount brackets
Four 1/2" Screws
Eight 3/4" Screws
Warranty information
Instructions

Featured video:

Featured review

Clear and loud! Sounds amazing with an amp. Used in a five channel set up for mids and highs. Amazing product for the price. Just be careful with the tweeter mounts. They twist off, they do not snap off!

Eugene from ORLAND PARK, IL

See all 31 reviews

Customer Q&A

The 90 RMS for the speakers combined or 90 RMS each?

I'm not 100 percent sure but I believe that's per pair I'm still building my system sections at a time

12 reasons to shop with us

#12

Trusted since 1974

Here talking gear for many a year.

See all reasons

REVIEWS

Loading reviews...

Pioneer TS-D65C reviews

Average review:

31 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Verified customer

Verified employee purchase

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

DETAILS

Researched by Crutchfield's Pat M.

Features & specs

General
Speaker Size	6 1/2
Design	2-way
Tweeter Design	1" Dome
Impedance (Ohms)	4
Tweeter Composition	Polyester
Woofer Composition	IMPP with Aramid Fiber
Woofer Surround	Rubber
Parts Warranty	1 Year
Labor Warranty	1 Year
Specifications
Sensitivity (1W at 1 meter)	84
Sensitivity at 2.83 volts	N/A
Frequency Response	32 - 49k Hz
Minimum RMS Wattage	---
Maximum RMS Wattage	90
Peak Power Handling (Watts)	270
Top-mount Depth (Inches)	2 5/8
Bottom-mount Depth (Inches)	N/A
Cutout Diameter or Length (inches)	5 1/2
Mounting Height (Inches)	0.227

The Pioneer TS-D65C replaces these items:

Pioneer TS-D1730C

Product Research

Features

Woofers: Each woofer uses an aramid fiber interlaced injection-molded polypropylene (IMPP) cone. This process of cone molding assures a uniform thickness and the addition of aramid fibers adds rigidity to the cones.

Size Classification Note: Some manufacturers, including Pioneer, call this size woofer a 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size as a 6-3/4". Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.

Tweeter Mounting: The tweeters can be flush mounted or mounted behind a factory grille using the included housings. Once installed in either housing the tweeters will pivot, so they can be angled to optimize imaging.

Tweeter Mounting Dimensions:

	Factory Mount	Flush Mount
Mounting Height	0"	0.543"
Mounting Depth	1.134"	0.591"
Frame Diameter	2.012"	2.322"
Cutout Diameter	N/A	2.010"

Crossovers: The high pass crossovers are integrated into the included speaker wire and the low pass crossovers are integrated into the woofer baskets. Both are 6 dB/octave and the crossover point is 3 kHz. The two lengths of speaker wire each connect to both a woofer and tweeter. Quick slides connect to the woofer, a 40" output leg with integrated crossover (approximately 1/2" diameter x 3/4" long) connects to the terminals attached to the tweeter, and an 11" input leg connects to the source.

The Pioneer TS-D65C replaces these items

Pioneer TS-D1730C

6-3/4" component speaker system

5 reviews

component speaker system includes two 6-3/4" woofers, two tweeters, two external crossovers, and two woofer grilles
Twaron® aramid fiber woofer cone with rubber surround
7/8" soft dome tweeter

ACCESSORIES

Loading accessories...

Q&A

8 questions already asked

Will this fit my 2006 Scion tC?

[ Kadee Feb 14, 2020 ]

1 answer

They should if not in the factory mounts it's not hard to do some custom mounts that's what I did in my 96 suburban. Oh by the way good choice on speakers they sound amazing

[ MYKE Feb 14, 2020 ]

How do these compare to the alpine s s65c, are they more premium, have a better sound etc?

[ bilbo Jan 24, 2020 ]

2 answers

I would go with the pioneer's. I'm not sure what vehicle your wanting to put speakers in, but in my 2010 corolla they sound great. I replaced my stock JBL speakers with these pioneer's and it was a big improvement. I also installed Pioneer's TSG690 6"x9" rear speakers also and the whole set works great together. If you are installing the speakers yourself I recommend that you do some research on how to install your speakers in your vehicle. The folks at Crutchfield were a huge help with me on getting the right tools, adapters and wire connecters to get the job done right. Extra note: Crutchfield sent me wire instructions so I would not blow my factory amp. They are fantastic on helping there customers get the results they are looking for. Hope the info helps and good luck.

[ Adam Jan 25, 2020 ]

Never owned the alpines but I can say when I first purchased they were VERY clean and could get loud. Now it seems they're not quit as clean when you turn up the volume. It could of been that the previous speakers were pretty shot or whatever BUT they are still a very good set of speakers I was/am not disappointed one bit, for the price it would be a hard pair to beat ??????????

[ Scott Jan 24, 2020 ]

How do these compare to the alpine s s65c, are they more premium, have a better sound etc?

[ bilbo Jan 24, 2020 ]

1 answer

Don't know about the Alpine brand but the TS-D65C sound is exceptional. The tweeters can be positioned in a way so the sound can be precise. I have (2) sets of these in my 2011 Pathfinder using (2) two channel JVC amp. One for the front and one for the rear. The only disadvantage that these DO NOT have separate crossovers like other separate components do, i.e.(tweeter/woofer/ crossover). Crossovers are built in for these drivers both tweeter and woofer. Quality of them are premium is say sound quality wise.

[ JOHNNY B Jan 24, 2020 ]

Is there a crossover for the tweeters too?

[ Andrew May 23, 2019 ]

2 answers

The tweeters and the mid bass both do have passive fixed crossovers built- in individually. If you look at the back of them you noticed. I have these installed in my 2011 Nissan Pathfinder and the sound fantastic. These are pushed by JVC KSAX3102 and JVC KSAX3002 (old school) amps and JBL MS-8 sound processor.

[ JOHNNY B May 23, 2019 ]

It is built into the wiring harness that goes from the midrange sub to the tweeter

[ Ron May 23, 2019 ]

Can these be bi-amped?

[ KELLEY May 30, 2018 ]

2 answers

Really don't need external amp, but it will bring out the dynamics if you do. Keep in mind that these have fixed individual passive crossovers built in them which means the CAN NOT BE BI-AMPED. Both tweeters and the mid-bass have to be wired in parallel in order to work. My set up consist of (2) individual amps. One is for the two rear speakers and other is located in the front. Both amps is controlled by JBL MS-8 sound processor and sub amp is JBL msa5001 driving JB (1) 8" JL audio w3v2 woofer.

[ JOHNNY B May 23, 2019 ]

I had mine hooked up to a factory radio and they sounded okay. I later upgraded the headunit and put them on my pioneer 5 channel amp. Sound quality is so much better

[ Ron May 23, 2019 ]

The 90 RMS for the speakers combined or 90 RMS each?

[ Jay May 20, 2018 ]

4 answers

I'm not 100 percent sure but I believe that's per pair I'm still building my system sections at a time

[ Matthew May 21, 2018 ]

Each

[ Paul May 20, 2018 ]

I asked the same question of an online Crutchfield rep and he said 90 each. I am running the woofers only with 75 watts rms and although i don't push them too hard i have had no issues.

[ Benjamin May 20, 2018 ]

I believe each so it's a 2x90w, I don't ever recalling a speakers beung labeled as a combined watt

[ Jonathan May 20, 2018 ]

Do these require an amplifier or will they work with the OEM radio? FYI: I have a 2006 silverado crew cab with speaker and separate tweeter in front doors and speaker in rear doors (total of 4 speakers and 2 tweeters). Also have some device (amp?) hidden behind the glove box. I was told it was a factory amp but not sure and don't know the specs.

[ Charles Dec 19, 2017 ]

2 answers

This speakers must be amplified 100%. Wont work properly with OEM head.

[ ANTON Nov 23, 2020 ]

These speakers are not very efficient (84dB), so, they are not a great match for the minimal factory wattage in any vehicle. They are best when used with an aftermarket amplifier. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through out online chat service: https://www.crutchfield.com/support/ContactUs.aspx

[ Ryan Dec 27, 2017 ] Staff

Are the tweeters for the post mounted factory ones and the other speaker for the door mount?

[ Nicole Dec 02, 2017 ]

1 answer

This will depend largely on your vehicle. For details on installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you all the details for your specific installation.

[ Larry Dec 05, 2017 ] Staff

SHOW MORESHOW LESS