About the JL Audio 10W6v3-D4
Bass that means business
Pole-venting helps the sub stay cool when you turn the volume up.
Bass that means business
JL Audio's celebrated W6v3 subwoofers deliver knockout low end with incredible accuracy. The 10W6v3-D4 10" subwoofer uses a tough, mineral-filled polypropylene cone that offers incredible strength without the extra bulk that can slow woofer response. JL Audio conducted extensive research to develop a motor structure that operates efficiently and precisely, so this sub can deliver powerful, reliable bass while handling up to 600 watts RMS. Exclusive cone-bonding assemblies, advanced cooling systems, and a highly stable spider attachment enhance reliability and promote long performance life.
Precision-crafted low end
The sub's solid cast-alloy basket allows your W6v3 sub to handle big-time power without any distortion-causing flexing. A sophisticated suspension system promotes linear cone movement for greater accuracy. The simple terminal jumper wiring system allows you to set the subwoofer's impedance to draw maximum power from your amplifier, or to design a multi-sub setup.
Get the sound and look you want
The elegant JL Audio medallion on the front shows the competition you mean business. Go for a special look with the removable black trim ring, which can be painted to match your installation theme. The 10W6v3-D4 works best in a compact enclosure, so you can get great bass in some tight places.
The terminal jumper system lets you easily adjust the sub's impedance.
To drive this single subwoofer, we recommend a mono amplifier rated between 450 and 900 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
- 10" subwoofer with dual 4-ohm voice coils
- mineral-filled polypropylene cone with rubber surround
- satin black cast-alloy basket
- power range: 200-600 watts RMS
- peak power handling: 1200 watts
- frequency response: 22-200 Hz
- sensitivity: 82.7 dB
- top-mount depth: 6-15/16"
- sealed box volume: 0.628 cubic feet
- ported box volume: 0.828 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 92140
What's in the box:
- One 10" Dual 4-ohm voice coil subwoofer
- 2 Voice coil jumper wires (installed)
- Black plastic trim ring (installed)
- Owner's manual
- Voice coil connection warning
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
JL Audio 10W6v3-D4 reviews
This is one heck of a sub. I replaced four ten inch Polk dxi's with one of these bad boys and man is the bass clean. This sub gets low without distorting and sounds great with all types of music, makes my commute much more enjoyable!
Pros: No distortion, hits the low notes clearly, very well built
Cons: Quite pricy and heavy...but that is to be expected from a high quality product.
12 of 12 found this helpful
I had 2 w3v3-4 before I replaced with 2 w6v3. Boy was I pleasntly surprised. Clean hard hitting bass. I liked the w3v3-4 but I love the w6v3. I wouldn't trade them for no other. I have after market door speakers. 6 165vrs 6"1/2" and they compliment them nicely. U can't go wrong with theses.
Pros: Hard hitting bass.
Cons: A little pricy but worth every penny
9 of 9 found this helpful
I have a single 10W6v3-D4 with an Alpine PDX-M6. Amazing sound quality with the "thump" I was looking for to give an amazing all-round system to my classic car, that I use for car shows and cruise-ins, along with rides on beautiful days. One of these W6's complimented my JL C2-690tx's and JL C2-650cw's with an Alpine PDX-F4 amazingly. I listen to all genres of music, this gave my sound system the bass I was looking for in harder hitting rap music and the sound quality I needed when listening to the double bass pedal of metal or the bass guitar in country and classic rock music. I would recommend this sub to anyone. I at one time had a 12W3v3-4 in my truck an I'm not sure if I would ever have another W3 now that I have heard the quality of the W6.
16 of 17 found this helpful
I got this as a replacement for my 10w6 v2 that i had ran hard for 3 years ,,straight out of the box this thing has been redefined,,everything was bigger and beefier,now I know that looks aren't everything so after going thru a break in period of 2 weeks ive been amazed at what this new one is capable of and the sound is just booming but clean and clear, every thing from death metal to hip hop edm jazz etc.. Im running 750 rms to it ...the price is alittle high for a sub but i dont see this letting me down anytime soon!!
Pros: Every thing
11 of 11 found this helpful
Sounds like 2 expensive 12's or 15's but in a 10 inch sub. Only using .625 cu.ft. of airspace like the w0, w1 and w3 but allows greater power handling and unparalleled sound in a small package. As soon as I turned mine on I wondered why anyone, including myself, ever bought the w3. Not much more and a lot more power capabilities and tones in your music. A must buy, will turn you into a JL audio fanatic!
Pros: Great sound quality, great look, unbelievable output for a 10 inch sub only rated for 200-500 watts rms.
Cons: 2 or 8 ohm options are a bit weird, so if you run two of them it's either a 1 or 4 ohm load to the amp. Most JL amps are 1.5,2,3 or 4 ohm amps.
14 of 16 found this helpful
Heavy, sturdy, beautiful, superb low freq response
Pros: everything. great build quality, beautifully constructed, keeps great frequency response when I play it at high volumes.
Cons: For what it is, I have none. The only thing you have to watch out for is that it is back heavy. So don't use a cheap box with it. Not really a Con, just FYI.
18 of 20 found this helpful
It's crisp, hit's hard. Built to last, look great sound Awesome. These 10" subs deliver on every thing throne at them. You can't go wrong with these.
Pros: Build Quality, sound unbelievable, for 10" subs. Every type of music sounds great.
18 of 19 found this helpful
This sub sounds amazing. It's hard to think that it only a 10. It hits at several different ranges and always sound crisp and clear.
Pros: Great build that will last, and it looks and sounds amazing
Cons: A little on the pricey side
16 of 18 found this helpful
More details on the JL Audio 10W6v3-D4
Features & specs
|Impedance||2 ohms or 8 ohms|
|Cone Material||Mineral-filled IMPP|
|Ideal Sealed Box Volume (cubic feet)||0.628|
|Ideal Ported Box Volume (cubic feet)||0.828|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
82.7 dB at 1 watt |
|Frequency Response||22 - 200 Hz|
|Max RMS Power Handling||600|
|Peak Power Handling (Watts)||1200|
|Top Mount Depth (inches)||6 15/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: Due to the 10W6v3-D4's dual 4 ohm voice coils, the subwoofer can be configured as a 2-ohm (voice coils wired in parallel) or 8-ohm (voice coils wired in series) driver. The included jumper wires allow easy adjustment from one configuration to the other (the factory jumper position is 2-ohm).
Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the 10W6v3-D4 motor remains linear over a long excursion range, and also maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
Pole-Vent Airflow Control (PVAC): The bullet-shaped structure inside the pole-vent directs airflow and increases air velocity to effectively reduce voice coil temperature, leading to improved fidelity and reliability.
Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
Elevated Frame Cooling System: The elevated frame design of the 10W6v3-D4 delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
Customizable Trim Ring: The woofer has a removable ring made of black ABS plastic which can be painted to match the installation theme and create a personalized look. You can purchase an optional mesh grille insert specifically designed to fit into the inner diameter of the trim ring (item number 136SGR106, sold separately).
Engineered Lead Wire System: JL Audio's engineered flying lead-wires have carefully engineered entry and exit support structures molded into the terminals and the voice coil collar and are jacketed to further reduce the likelihood of shorting and fatigue. The result is predictable high-excursion lead-wire behavior with long term reliability, and none of the compromises inherent to a woven-in lead wire system (when attached or woven into the spider material, lead-wires can alter the spider's motion, leading to asymmetrical spider behavior).
Sealed Enclosure: JL Audio recommends a sealed box size of 0.628 ft³ (0.55 ft³ net, plus the sub's 0.078 ft³ displacement). A diagram is provided in the owner's manual for a sealed box with external dimensions of 12-1/2" W x 12-1/2" H x 10-1/2" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, subtract 1/4" from each dimension.)
Ported Enclosure: The ported box size JL Audio recommends is 0.828 ft³ (0.75 ft³ net, plus the sub's 0.078 ft³ displacement). The recommended slot port is 10-7/8" x 1-3/8" x 27-5/8", resulting in a tuning frequency of 39 Hz and a -3dB point of 33 Hz.
Q Crutchfield asked: Why did you buy this?
3 questions already asked