About the JL Audio C5-400cm-RP
Made in Germany, this C5-400cm-RP 4" midrange driver was built to be the workhorse of your custom car audio system, handling the crucial frequencies that determine the character of your music. The vocals and instruments come alive, thanks to superb construction and superior materials. This 4" driver uses a mineral/polypropylene cone for excellent damping and a smooth sound that makes it an impressive performer in a 3-way system. A crossover is not included with this speaker, so you'll need to use an active crossover to craft exactly the right sound for you and your vehicle.
- single 4" midrange speaker
- mineral/polypropylene cone with rubber surround
- for use with an active crossover
- handles up to 75 watts RMS (225 watts peak)
- optimum frequency range: 300-5,000 Hz
- impedance: 4 ohms
- sensitivity: 89.5 dB
- grille not included
- top-mount depth: 1-5/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 49022
What's in the box:
- One 4" Component midrange
Thanks for submitting your review
More details on the JL Audio C5-400cm-RP
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89.5|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||100 - 9k Hz|
|Minimum RMS Wattage||25|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||225|
|Top-mount Depth (Inches)||1 11/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||3 5/8|
|Mounting Height (Inches)||0.298|
4/2 Hole Compatibility: Most 4" factory speakers use four mounting screws, however, in some vehicles, only two are used. The C5-400cm's mounting tabs can be removed, allowing installation in 4-hole or 2-hole applications. Care should be taken handling the speaker after any tabs are removed because the broken edges may be sharp. Please enter your vehicle information to confirm fit.
Frequency Range: Although the C5-400cm's measured frequency response is 100 Hz-9 kHz ± 3 dB, it's designed to operate within the 300 Hz-5 kHz bandwidth for the best sound quality. No crossover is included.
Power Handling: JL Audio publishes several power specifications for this speaker, 75 watts continuous power handling (RMS), 225 watts peak music power, and 25-150 watts recommended amplifier power (RMS). We've listed the conservative combination of 25-75 watts RMS in the specs table.
Speaker Cones: The cone and suspension elements were designed and manufactured by the world-famous Dr. Kurt Müller & Co of Germany. The speaker features a low-mass, mineral-filled polypropylene cone with a rubber surround.
No Grille: No grille is included with this speaker.