About the JL Audio M770-ETXv3-SG-TB
More power means more performance
More power means more performance
If you're serious about wakeboarding, you have a serious boat to match. If you're serious about sound, your boat needs a set of high-output JL Audio M-Series tower speakers. These top-shelf speakers are designed to blast through the rumble and roar of a high-performance marine engine. With big, bright 1" marine-grade tweeters made from pure silk, these sharp-looking 7.7" speakers sound phenomenal at any volume.
Everything about these speakers is built to survive on the water. JL Audio uses marine-grade stainless steel, synthetic fibers, and UV-resistant polymer baskets to protect their inner workings against humidity and salt. The titanium "Sport Grilles" look terrific, of course, but they're also durable enough to keep rockin' through sun, spray, salt, and storms.
Built tough for when it gets rough
The super-stiff mica-injected polypropylene cones feature durable synthetic-rubber surrounds, while the 1" treated silk dome tweeters are mounted directly to the grilles for optimal sound. A high-quality 2-way crossover sealed in a watertight capsule mounted to the woofer's frame sends the highs and lows where they're supposed to go – you'll hear all the details of your music, even when you're really moving across the water. Lightweight neodymium magnets deliver heavy sound, but won't mess with your boat's center of gravity.
Don't forget the clamps
Each of the injection-molded enclosures features a decorative, aluminum logo cap on the end opposite the speaker, and is designed to mate with a JL Audio clamp system (sold separately). The wire exits through the center of the mount, so it stays high, dry, and out of
- 7.7" 2-way marine tower speakers (pair)
- injection-molded, mica-filled polypropylene woofer with synthetic rubber surround
- injection-molded, UV-treated enclosure and grille
- 1" silk dome tweeter
- 2-way crossover attached to the woofer basket
- UV- and corrosion-resistant polymer baskets and grilles
- power handling: 40-175 watts RMS (225 watts peak power)
- frequency response: 45-25,000 Hz
- sensitivity: 91 dB
- enclosure depth: 12-1/2"
- enclosure diameter: 7-3/4"
- JL Audio mounting clamps (sold separately) are required
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 91396
What's in the box:
JL Audio M770-ETXv3-SG-TB owner's manual
- 2 Marine tower speakers
- 2 Endcaps
- 5 Crimp-connectors
- 2 Wire-ties
- Tube of Silicone
- "Warning" note
- "JL Audio" decal
Thanks for submitting your review
This review was collected as part of a promotion
More details on the JL Audio M770-ETXv3-SG-TB
Marine Tested Design: Building serious marine products requires a real commitment to environmental testing and materials specification. To this end, JL Audio has invested in Ultraviolet testing chambers (to simulate years of sun exposure) and Salt Fog chambers (to simulate years of exposure to salt-water environments. This testing is critical to building products that will not only sound great in your boat, but will also sound great for many, many years.
Coaxial Tower Speaker: Enclosed in these injection-molded enclosures are JL Audio's M-Series 7.7" coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high. Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.
- Tweeter: The 1" silk dome tweeter is specially designed to withstand UV and salt-spray exposure. The dome tweeter uses a neodymium magnet for higher efficiency levels and is Ferrofluid-cooled and damped for improved response and power handling capabilities.
- Woofer: The woofer consists of an injection-molded, mica-filled polypropylene cone with UV inhibitors, synthetic rubber surrounds, and precisely engineered dust cap profiles for smooth upper-end response. The woofers also use marine-grade synthetic fiber spiders with a progressive roll design to withstand high humidity.
Polymer Enclosure: The specifically engineered, injection-molded, marine-grade polymer enclosures and grilles are corrosion and UV-resistant to protect the tower speakers from the harsh marine environment. The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application.
Mounting Hardware (Sold Separately): Each enclosure is designed to mate with one of JL Audio mounting fixtures (sold separately, and available to fit a wide range of applications). These mounting fixtures are marine-grade stainless steel and will hold up to marine life. Check the accessory list for available mounting fixtures.
Note: If you need help determining the correct pipe-mounting clamp for your installation, then download JL Audio's Pipe-Mounting Clamp Ruler.
Speaker Wiring: The speaker cables exit through the center of the mounting fixtures, staying high and dry, and out of sight. The speaker cable consists of Red, Black, Green, and White wires. The Red and Black are positive and negative speaker wires. The Green and White wires are present in case you would like to add the JL Audio LED light rings (sold separately) to the front of the speakers.
Power Recommendation: For best results, JL Audio recommend powering this system with an amplifier in the 75 to 150 watt per channel range.
Installation Note: Professional installation is strongly recommended.