About the JL Audio M10W5-SG-TB
Made-in-USA bass for your boat
Made-in-USA bass for your boat
The M10W5-SG-TB 10" marine subwoofer reflects JL Audio's commitment to top-quality engineering and sound quality. With the deep black chassis and titanium-finish "Sport Grille" design, this sub will look great in a wide variety of boat interiors.
Built for life on the water
Designed specifically to survive in the marine environment, the M10W5-SG-TB sports a corrosion-resistant Centrex® polymer basket that surrounds the sub's internal structure for extra protection. The marine-grade synthetic fiber spider, injection-molded polypropylene cone, and synthetic rubber surround deliver outstanding performance, while shrugging off the corrosive effects of sun, salt, and moisture. A special UV treatment protects the grilles from the damaging effects of sunlight.
Designed for sealed or ported enclosures
Great, but how does it sound? The subwoofer's motor structure allows extended cone movement, so you'll hear bass that's loud and low, yet precise and smooth. JL Audio designed the M10W5-SG-TB to work in sealed or ported enclosures, so you can mount this versatile subwoofer in the type of box that matches your taste in music.
- 10" 4-ohm marine subwoofer
- injection-molded mica-filled polypropylene woofer with synthetic rubber surround
- Centrex polymer basket and grille, with stainless steel back plate
- gold-plated, marine-grade brass binding posts
- marine-grade synthetic fiber spider
- handles up to 250 watts RMS
- sensitivity: 86.7 dB
- top-mount depth: 5-7/8"
- sealed box volume: 0.875 cu.ft
- ported box volume: 1.25 cu.ft.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 91737
What's in the box:
- 10" Marine subwoofer
- Titanium (gray) polymer grille
- 6 Stainless-steel Philips-head screws
- 6 Stainless-steel flat-washers
- 6 Grille logo badges (2 Red/ 2 Black/ 2 Gray)
- Owner's manual
More details on the JL Audio M10W5-SG-TB
Marine Tested: JL Audio's marine subwoofers go through ultraviolet testing chambers (to simulate years of sun exposure) and salt fog chambers (to simulate years of exposure to salt-water environments and are built to withstand the rigors of marine use.
Woofer: The JL Audio Marine 10" subwoofer features an injection-molded, mica-filled polypropylene cone woofer with a synthetic rubber surround specifically formulated for marine use. The woofer uses a vented motor design with a marine-grade stainless steel rear diffuser plate and a marine-grade synthetic fiber spider with a progressive roll design.
DMA (Dynamic Motor Analysis): JL Audio's proprietary Dynamic Motor Analysis (DMA) technology results in ultra-linear motor force over a long range of excursion and a wide range of power inputs to reduce distortion and improve sound quality.
Polymer Basket And Grille: The Centrex, UV-resistant polymer basket and grille are corrosion and UV-resistant which help protect the woofer and encapsulates the motor assembly to prevent corrosion.
Connections: The 10" marine woofer is equipped with marine-grade brass connection terminals.
Mounting Hardware: The woofer comes supplied with marine-grade, stainless-steel mounting screws and washers.
Box Type: JL Audio recommends either a 0.875 ft³ sealed enclosure or a 1.25 ft³ ported enclosure with a single 3" diameter x 13" long port. The box should be constructed out of 5/8" to 3/4" thick material.
Q Crutchfield asked: Why did you buy this?
1 question already asked