About the JL Audio MX10IB3-SG-TB
Great bass on your boat
Great bass on your boat
JL Audio's MX10IB3 10" marine subwoofers reflect the company's commitment to top-quality engineering and sound quality. With marine-grade componentry, durable grilles, and outstanding performance, this sub will be a welcome addition to your boat's audio system.
Built for life on the water
Built from the ground up for the marine environment, the MX10IB3-SG-WH sports a corrosion-resistant Centrex® polymer basket that surrounds the sub's internal structure for extra protection. The marine-grade synthetic fiber spider, injection-molded polypropylene cone, and synthetic rubber surround promote top performance, while shrugging off the corrosive effects of sun, salt, and moisture. The UV-resistant polymer basket encases and protects the entire structure, plus UV protection ensures that the grilles will stay white, looking factory-fresh even after years of sun exposure.
Designed for a variety of enclosures
The subwoofer's motor structure allows extended cone movement, so you'll hear bass that's loud and low, yet precise and smooth. The versatile sub works best in sealed enclosures, but it also works well in free-air applications, so you can mount it directly into a bulkhead if there's no space for a box.
- 10" 4-ohm marine subwoofer
- injection-molded mica-filled polypropylene woofer with synthetic rubber surround
- Centrex polymer basket and white "Sport" grille, with stainless steel back plate
- gold-plated, marine-grade brass binding posts
- marine-grade synthetic fiber spider
- works in sealed boxes and free air applications
- handles up to 175 watts RMS
- sensitivity: 87.2 dB
- top-mount depth: 5-1/8"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 91935
What's in the box:
- 10" Marine subwoofer
- Titanium (gray) polymer grille (attached)
- Six 1-1/2" Stainless-steel philips-head screws
- 6 Stainless-steel flat-washers
- 6 Grille logo badges (2 Red/ 2 Black/ 2 Gray)
- Owner's Manual
Thanks for submitting your review
More details on the JL Audio MX10IB3-SG-TB
Marine Tested: JL Audio's marine subwoofers go through ultraviolet testing chambers (to simulate years of sun exposure) and salt fog chambers (to simulate years of exposure to salt-water environments) and are built to withstand the rigors of marine use.
Woofer: The subwoofer features an injection-molded, mica-filled polypropylene cone woofer with a synthetic rubber surround specifically formulated for marine use.
DMA (Dynamic Motor Analysis): JL Audio's proprietary Dynamic Motor Analysis (DMA) technology results in ultra-linear motor force over a long range of excursion and a wide range of power inputs to reduce distortion and improve sound quality.
Infinite-Baffle Operation: The M10IB3 is optimized for infinite-baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure.
Polymer Basket And Grille: The polymer basket and grille are corrosion and UV-resistant, and the basket encapsulates the motor assembly to prevent corrosion.
Connections: The speaker terminals are 0.25" wide gold-plated, marine-grade brass, male quick slide connections.
Mounting Hardware: Marine-grade stainless-steel mounting screws and washers are included.
Box Type: If mounting in an enclosure, JL Audio recommends a 2.5 ft³ sealed box (2.0 ft³ minimum). The M10IB3 should not be mounted in a ported enclosure.
Grille: The woofer is shipped with the grille attached (using three screws). The grille can be removed, but the woofer can be installed without removing the grille. If the woofer is mounted without the grille, several measurements are different:
- Mounting Height: changes from 1.57" to 0.791"
- Flange Height: changes from 1.14" to 0.5"
- Frame Diameter: changes from 10.75" to 10.382"
Q Crutchfield asked: Why did you buy this?
2 questions already asked