Contact us
Close contact box

JL Audio HO110RG-W3v3

Ported H.O. Wedge™ enclosure with one 10" W3v3 subwoofer

Item # 13693135

JL Audio designed the HO110RG-W3v3 enclosure as a perfect match for its powerful 10" W3v3 subwoofer so you can...

Read more from Crutchfield writer, Gabrielle T.

Ships free today

Low Stock
$429.99

About the JL Audio HO110RG-W3v3

AJL Audio Built In USAdvanced construction for intense sound

JL Audio designed the HO110RG-W3v3 enclosure as a perfect match for its powerful 10" W3v3 subwoofer so you can count on maximum performance. The woofer sits in a recessed baffle, part of a separate chamber within the enclosure, and the rear-firing slot port output combines with woofer output for efficient performance.

AJL Audio Built In USAdvanced construction for intense sound

The "H.O." in JL Audio's H.O. Wedge enclosed subwoofer systems stands for "High Output," and that's exactly what you'll hear and feel. High Output Wedges deliver efficient, accurate bass, with better sound quality than conventional ported and bandpass boxes.


Tremendous low end

JL Audio designed the HO110RG-W3v3 enclosure as a perfect match for its powerful 10" W3v3 subwoofer so you can count on maximum performance. The woofer sits in a recessed baffle, part of a separate chamber within the enclosure, and the rear-firing slot port output combines with woofer output for efficient performance.


Hand finished for bass you can really feel

JL Audio employs advanced woodcutting machinery to fabricate these enclosures, which are finished by hand at their facility in Florida. The eye-catching solid aluminum enclosure bars complement the H.O. Wedge's automotive-grade gray carpet covering, giving your system a radical look while protecting your sub. The angled back design saves precious cargo space, while strong internal bracing and the recessed mounting baffle maintain the enclosure's integrity and protect the sub.

JL Audio enclosure assembly

READ LESS

Product highlights:

  • ported enclosure with one 10" W3v3 subwoofer
  • 5/8" medium density fiberboard construction covered with gray carpet and black insert
  • solid aluminum grille bars
  • 2-ohm total impedance
  • power handling: 150-500 watts RMS
  • frequency response: 25-250 Hz
  • sensitivity: 85 dB
  • 29-1/2"W x 13-1/4"H x 12"D1 x 7-3/8"D2
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # 93135
KEEP READINGREAD LESS

What's in the box:

  • 10" woofer in a hatcback enclosure
  • Warranty Information sheet

Customer reviews

Loading reviews...

JL Audio HO110RG-W3v3 Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the JL Audio HO110RG-W3v3

Features & specs

General
Woofer Size (inches) 10
Speakers Per Box 1
Woofer Material Mineral/Poly
Enclosure Type Ported
Color Gray
Pieces in System 1
Width (inches) 29-1/2
Height (inches) 13-1/4
Depth (inches) 12
Second Depth (inches) 7-3/8
Connector Type 5-way post
Frequency Response 25-250 Hz
Power Range (Watts RMS) 500
Maximum Wattage 1000
Sensitivity 85 dB
Impedance 2 ohms
Parts Warranty 2 Years
Labor Warranty 2 Years

Product Research

Features

Overview: This H.O. (High Output) subwoofer enclosure system is designed around JL Audio's W3v3-2 subwoofer. The H.O. enclosure is properly sized and tuned to the optimum ported alignment for the mounted 10" JL Audio W3v3 2Ω woofer.

H.O. Wedge Enclosure: JL Audio's patented High Output Enclosures feature a chamber-coupled port design to minimize turbulence and maintain excellent sound quality at all listening levels. The port wall integration and internal bracing ensure structural integrity. The slot-port wraps around the inner part of the enclosure and terminates beside the woofer. This type of design provides the necessary surface area and port length to maximize the performance of the JL Audio 10" W3v3-2. The enclosure's recessed mounting baffle and aluminum bar grilles also provide protection for the woofer. The JL Audio H.O. enclosure has a pair of gold-plated 5-way binding posts on the left side of the box.

10" W3v3 Woofer:

  • Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, W3v3 motors remain linear in motor force over a very long range of excursion, and also maintain a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
  • Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
  • Vented Reinforcement Collar (VRC): The Vented Reinforcement Collar is a composite structure that addresses two issues related to reliability. By reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weaknesses. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes. the VRC also feature slots that facilitate air flow directly onto the voice coil windings to reduce thermal compression effects and enhances reliability.
  • Spider/Lead Wire Assembly: The W3v3 features a unique spider, coil and terminal subassembly which is assembled prior to installation in the speaker frame for optimum alignment and glue-joint integrity. The spider is insert-molded into a composite carrier tray which also incorporates the terminal assembly and lead wire strain relief features for enhanced reliability and optimal alignment of parts. The flying lead wires are carefully controlled and strain-relieved without resorting to woven-in lead wires, which can degrade spider performance.
  • Elevated Frame Cooling: The elevated frame design of the W3v3 delivers high-velocity air flow through slots directly above the top plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
  • Surround Stress Relief: By creating a radiused feature on the edge of the cone, stress is relieved from the surround material at maximum forward excursion, resulting in longer life and more consistent surround behavior.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Gotta feel it. [ A  Sep 04, 2018 ]
A
Brand Quality and Performance [ Gregory  Jul 07, 2018 ]
A
compact with big sound. It will fit perfectly in my mustang trunk. [ Robert  Jul 06, 2018 ]
A
I had already purchased a p1-2x10 rockford setup and I found this to be much better sound quality and still alot of volume. It also takes up much less space. So i cancelled my rockford order and picked this up instead :-) [ Zachary  Feb 27, 2018 ]
A
Nothing better than jl bitch! [ SHAD  Jan 13, 2018 ]
A
This subwoofer is built in the USA and by the top player in the game. I am quite pleased with the purchase and can't wait to get it installed in my GTI! [ Robert  Oct 08, 2017 ]
A
This Subwoofer really cranks in my trunk without the "boomy" sound!!! [ Gregory  Sep 24, 2017 ]
A
Looking for more output than what I have while maintaining sound quality. [ Trenton  Apr 27, 2017 ]
A
Love JL Audio [ MICHAEL  Nov 19, 2016 ]
A
I chose this outstanding subwoofer enclosure setup because of the reputation JL Audio has for amazing sound and by researching the power this sub can handle. [ Jacob  Aug 18, 2016 ]
SHOW MORESHOW LESS

2 questions already asked

Q
Where is the port on this enclosure? It doesn't appear that there is one in the photos.
[ Steve  Apr 28, 2015 ]
8 answers
A
No port. Sealed enclosure
[ James  Apr 29, 2015 ]
A
The slot that forms between the speaker and the grille is bigger than what it seems, and that right there is your port.
[ John  Apr 28, 2015 ]
A
The post is vented around the subwoofer driver. The black carpet is the panel the speaker is mounted to. There is a slot to one side of that panel, maybe both -can't really see. The grey outer speaker enclosre walls are apart from the black panel about half and inch, continuing the slot porting.
[ Thanos  Apr 28, 2015 ]
A
The port is inside where the subwoofer is located. It is hidden which is so much better than seeing a hole in the box on the exterior.
[ JASON  Apr 28, 2015 ]
A
The ports are to the left and right of the speaker. The speaker is recessed into the box.
[ MATTHEW  Apr 28, 2015 ]
A
The port is all around the woofer mounting plate. That way you can see that the woofer is not flush mounted on the enclosure, it is about 2 inches inside. This sub does not have a regular tube type port.
[ CARLOS  Apr 28, 2015 ]
A
If you look at the woofer, that area is slightly recessed into the box. The port is right above the woofer (under/below the carpeted panel), almost hidden from plain sight...clever design. Great job, JL Audio!
[ Michael  Apr 28, 2015 ]
A
it's ported in the front around the speaker.
[ Robert  Apr 28, 2015 ]
Q
Yes I was wondering if you sell this without the subwoofer? As in just the enclosure itself without the sub. I'm only asking because I already have two 10" w3v3's in a custom made box. Looking to downsize to just using one of my w3v3's. Same question applies to the sealed wedge style of this set up. I've narrowed it down to these two.
[ Max  Apr 08, 2014 ]
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
[ Krissy  Apr 08, 2014 ]  Staff

Loading articles...

TOP