About the JL Audio Stealthbox®
JL Audio bass in your 2018-up Expedition
JL Audio bass in your 2018-up Expedition
The JL Audio Stealthbox® custom-fit subwoofer delivers incredible bass in a package that takes up minimal space and blends in with your vehicle's interior. JL Audio designs Stealthboxes to fit in specific vehicles, then loads them with appropriate subwoofers for optimal performance. Pair the system with an appropriate amp and wiring for stellar, concealed bass.
Perfect sound to go with the perfect fit
JL Audio puts months of research and design into each Stealthbox® custom-fit subwoofer to ensure not only that it fits, but that it sounds better than any other custom enclosed system. First, JL Audio determines the ideal shape and mounting location for each enclosure, so that it looks like an original part of the vehicle it's designed for. Next, they mount each high-performance subwoofer so it delivers amazing firepower from within its unique enclosure, without sacrificing clarity or musical depth.
The fiberglass enclosure offers superior rigidity while allowing more interior volume, so the sub can turn out louder, deeper bass. JL Audio craftsmen then laminate, grind, join, and finish each Stealthbox® by hand. The end result: full-bodied, distortion-free bass from an impressively stealthy enclosure.
Enjoy enhanced, custom-fit sound
This Stealthbox® enclosure installs behind the driver's-side panel in the cargo area in select 2018-up Ford Expedition and Expedition MAX vehicles, replacing the factory subwoofer. This Stealthbox® includes one JL Audio 10TW1-2 2-ohm 10" subwoofer. Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information.
Installation Note: You'll have to remove the factory subwoofer to install this Stealthbox enclosure.
Product highlights:
- Stealthbox® custom-fit subwoofer
- sealed fiberglass enclosure
- contains one 10TW1-2 10" subwoofer
- 2-ohm total impedance
- installs behind driver's-side panel in cargo area
- power handling: 300 watts RMS (600 watts peak power)
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 94688
What's in the box:
JL Audio Stealthbox® owner's manual
- Custom enclosure loaded with a single 10" 10TW1-2 subwoofer
- 4 Mounting brackets
- One M8x25mm hex-head screw
- Three M6x20mm hex-head screws
- Five 1/4-20x1" hex-head screws
- One 1-1/4" flat-washer
- Eight 1" flat-washers
- One M8 lock-washer
- Three M6 lock-washers
- Five 1/4" lock-washers
- Installation guide
- Warranty information
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio Stealthbox®
Product Research
Features
Overview: JL Audio's SB-F-EXPED4G/10TW1 Stealthbox has been specifically designed to fit select 2018 - up Ford Expedition and Expedition MAX vehicles. It features a single 10" 10TW1-2 subwoofer in a custom sealed enclosure that mounts behind the driver's side panel in the rear cargo area - in place of the factory subwoofer.
Notes:
- Installation requires removal of the factory subwoofer, which gets replaced by the Stealthbox enclosure.
- Use our online vehicle selector to see what products work with your vehicle.
Subwoofer: The JL Audio Stealthbox's single 10" 10TW1-2 subwoofer offers a powerful combination of a shallow mounting depth and high excursion capability, producing deep powerful bass from a small enclosure. The single 2Ω voice-coil subwoofer is capable of handling up to 300 watts RMS (600W peak). A pre-installed black steel mesh grille is included for protecting the subwoofer.
Enclosure: The Stealthbox enclosure is made from fiberglass coated in black carpet and is designed to mount behind the driver's side panel in the rear cargo area - in place of the factory subwoofer.
Terminals: Connection to the JL Audio Stealthbox is made through a single set of binding posts that can accommodate speaker wire up to 10-gauge in size.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
