About the JL Audio M-RBC-1
Wired remote built for rough conditions
Wired remote built for rough conditions
This M-RBC-1 wired remote controls the output level of JL Audio's HX-Series and MHX-Series amps — amps designed for powersport and marine applications that need a wired remote built for rough conditions. The remote's cable incorporates waterproof gaskets to keep the electrical connections dry, so you can mount the M-RBC-1 controller in the front of your vehicle or boat, then dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and an 18-foot cable are included.
Product highlights:
- remote bass control for JL Audio HX- and MHX-Series amplifiers
- controls amplifier output level
- 18' remote cable and mounting hardware included
- 13/16"W x 13/16"H x 1-5/8"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 98404
What's in the box:
JL Audio M-RBC-1 owner's manual
- M-RBC-1 Remote Bass Control with attached 16.5' cable (RJ-14 plug)
- Flat washer
- Hex nut
- Instructions on packaging
Featured review
Works as described. Easy installation...
Gary from Key West, FL
Customer Q&A
Q
Will this bass controller work with that jx500 watt amp?
A
Yes. The M-RBC-1 is recommended for use with the JL Audio JX500/1D.
12 reasons to shop with us
#8
Hands-on product research
The most accurate info around.
REVIEWS
Customer reviews
Loading reviews...
JL Audio M-RBC-1 reviews
Average review:
Thanks for submitting your review
Customer photos
Submit a review and then enter to win a $350 rewards card
Review this product
More details on the JL Audio M-RBC-1
Product Research
Features
Overview: The JL Audio M-RBC-1 Water-Resistant Wired Remote Bass Controller is designed to remotely control the level of compatible JL Audio marine amplifiers equipped with a "Remote Bass" port. The RJ-14 connector at the end of the 16.5' cable has a water-resistant connection with a rubber cover. It can be mounted to surfaces no more than 1/8" thick. With an IPX-6 rating, the M-RBC-1 is splash-proof, however, it is not submersible. The M-RBC-1 comes with a black ABS plastic knob. A satin-finish aluminum knob can be purchased from the manufacturer, if desired.
Compatibility: The JL Audio M-RBC-1 is compatible with the following JL Audio marine amplifiers: HX300/1 and MHX300/1, controlling the Bass level when in Low-Pass mode. These amps have a female RJ-14 jack with a water-resistant cover like the remote cable, making the connection highly resistant to moisture. The M-RBC-1 can also be used in other amplifiers where the RBC-1 Remote Level Control is used:
- JX-Series (controls the Bass Level): JX250/1, JX500/1, JX500/1D, JX1000/1D
- Slash v3 Series: 600/1v3, 1200/1v3
- Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
- Original Slash Series: 500/1, 1000/1, 450/4, 500/5
- M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
- G-Series: All models
- A-Series: All models
- e-Series: All models (including marine versions)
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
1 question already asked
Loading articles...
