About the JL Audio C5-400cm-Single
Made in Germany, this C5-400cm-Single 4" midrange driver was built to be the workhorse of your custom car audio system, handling the crucial frequencies that determine the character of your music. The vocals and instruments come alive, thanks to superb construction and superior materials. This 4" driver uses a mineral/polypropylene cone for excellent damping and a smooth sound that makes it an impressive performer in a 3-way system. A crossover is not included with this speaker, so you'll need to use an active crossover to craft exactly the right sound for you and your vehicle.
- single 4" midrange speaker
- mineral/polypropylene cone with rubber surround
- for use with an active crossover
- handles up to 75 watts RMS (225 watts peak)
- optimum frequency range: 300-5,000 Hz
- impedance: 4 ohms
- sensitivity: 89.5 dB
- grille not included
- top-mount depth: 1-3/4"
- cutout diameter: 3-5/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 99132
What's in the box:
- One C5-400cm Component midrange
- Trim ring
- 3/8" Spacer
- Grille frame
- Four 1-1/4" Screws
- Four 1-1/8" Screws
- 8 Speed clips
- 1 Crimp-on 0.25" Female quick slide (16-14 Gauge)
- 1 Crimp-on 0.187" Female quick slide (16-14 Gauge)
- 2 Crimp-on spade connectors (16-14 Gauge)
- Grille putty
- JL Audio grille badge
Thanks for submitting your review
More details on the JL Audio C5-400cm-Single
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89.5|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||300 - 5k Hz|
|Minimum RMS Wattage||25|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||225|
|Top-mount Depth (Inches)||1 3/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||3 9/16|
|Mounting Height (Inches)||0.241|
Removable Mounting Tabs: Most 4" factory speakers use four mounting screws. However, in some vehicles, only two mounting holes are used. In these cases, you can bend any unnecessary mounting tabs on the C5-400cm midrange until they break off. The tabs are scored specifically for this purpose. Care should be taken in handling the speaker because the broken edges may be sharp.
Woofer Cones: The cone and suspension elements were designed and manufactured by the world-famous Dr. Kurt Müller & Co of Germany. The speakers feature low-mass, mineral-filled polypropylene cones with butyl rubber surrounds. The cone and surround are inherently well damped to deliver an uncolored, neutral bass without any coloration.
Power Handling: JL Audio publishes several power specifications for this speaker, 75 watts continuous power handling (RMS), 225 watts peak music power, and 25-150 watts recommended amplifier power (RMS). We've listed the conservative combination of 25-75 watts RMS in the specs table.
The JL Audio C5-400cm-Single replaces these items