About the JL Audio Media Master MMR-20
Control your MediaMaster from anywhere on your boat
This water-resistant wired remote works with your JL Audio MediaMaster marine receiver and allows you to control your music from a remote location on your boat. You'll also need a JL Audio marine cable (not included).
- works with JL Audio MediaMaster marine receivers
- audio cables sold separately
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 99907
What's in the box:
JL Audio Media Master MMR-20 owner's manual
- Marine wired remote (attached 10" cable)
- Mounting bracket
- Rubber gasket
- 2 Threaded bolts
- 4 Hex-nuts
- 4 Washers
JL Audio Media Master MMR-20 reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the JL Audio Media Master MMR-20
Compatibility: The JL Audio MMR-20 wired remote controller is designed specifically for JL Audio's MediaMaster MM100S marine source unit (136MM100S, sold separately). You will need a 6' or 25' wired remote extension cable (13699914 / 13699905; both sold separately). The MMR-20 remote can be installed up to 75' away from the MM100S source unit.
Expandable: You can install up to three MMR-20 wired remote controllers to one MediaMaster MM100S marine source unit. A Y-splitter (13699908, sold separately) will be required to add more than one remote control. Each remote must be installed within 75' of the MM100S source unit.
Weatherproof Design: The mMR-20 wired remote controller is IP67 rated and built to withstand the marine elements.
Backlit Controls: Large, backlit controls and source indicators are easy-to-see and easy-to-use, day or night.
- Power On/Off
- Source Select
- Volume Up/Down
- Play/Pause (for USB & Bluetooth)
- Previous/Next Track (for USB & Bluetooth)
- Preset Up/Down (for radio)
Mounting Options: The JL Audio MMR-20 wired remote controller is designed to be flush mounted into the bulk-head of your boat, watercraft, or vessel. The wired remote requires a round cut-out. The included mounting bracket and hardware secure the remote to the mounting surface. A rubber gasket is sandwiched in between the wired remote and the mounting surface.
- Cutout Diameter: 1.9375"
- Cutout Depth: 2.9375"
- Mounting Height: 0.625"
- Outer Diameter: 2.375"
3 questions already asked
Excellent addition to any boat. Very user friendly!
Doug from Hendersonville, TN