Control your MediaMaster from anywhere on your boat
This water-resistant wired remote works with your JL Audio MediaMaster marine receiver and allows you to control your music from a remote location on your boat. The package does not include the cable you need to connect the remote to your marine radio — you'll need either a 6-foot or 25-foot JL Audio marine extension cable.
Product highlights:
- works with JL Audio MediaMaster marine receivers
- remote cables sold separately
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 99921
What's in the box:
JL Audio MMR-20-BE owner's manual
- Marine wired remote (attached 10" cable)
- Mounting bracket
- Rubber gasket (pre-installed)
- Self-adhesive gasket
- 2 Threaded bolts
- 4 Hex-nuts
- 4 Washers
- Instructions
Customer Q&A
Q
Can this hook up to the Simrad Sonichub2 and control the system?
A
This can be hooked directly to your MM50 or MM100 to control the system. Also your MM50 or MM100 can be connected directly to your Simrad NMEA hub to control your media from Simrad
12 reasons to shop with us
Reason #2
Free 2-day shipping
Plus most orders go out the same day.
REVIEWS
Customer reviews
Loading reviews...
Customer photos
More details on the JL Audio MMR-20-BE
Product Research
Features
Compatibility: The JL Audio MMR-20-BE wired remote controller is designed specifically for JL Audio's MediaMaster MM100S BE marine source unit (13699920, sold separately). You will need a 6' or 25' wired remote extension cable (13699914 / 13699905; both sold separately). The MMR-20-BE remote can be installed up to 75' away from the MM100S source unit.
IP67 Water-Resistance Rating: The MMR-20-BE wired remote controller has been tested to withstand immersion in water, up to 1 meter (3.28 ft.) deep, for up to 30 minutes (when properly installed). While designed to be water-resistant, the MMR-20-BE should never be submerged under water for prolonged periods or subjected to activity that creates pressure on it that exceeds its depth rating.
Expandable: You can install up to three MMR-20-BE wired remote controllers to one MediaMaster MM100S BE marine source unit. A Y-splitter (13699908, sold separately) will be required to add more than one remote control. Each remote must be installed within 75' of the MM100S source unit.
Backlit Controls: Large, backlit controls and source indicators are easy-to-see and easy-to-use, day or night.
- Power On/Off
- Source Select (AM/FM, USB, Bluetooth, Aux)
- Volume Up/Down
- Mute/Un-Mute (AM/FM, Aux)
- Play/Pause (for USB & Bluetooth)
- Previous/Next Track (for USB & Bluetooth)
- Fast Forward/Rewind (USB)
- Preset Up/Down (AM/FM)
Mounting Options: The JL Audio MMR-20-BE wired remote controller is designed to be flush mounted into the bulk-head of your boat, watercraft, or vessel. The wired remote requires a round cut-out. The included mounting bracket and hardware secure the remote to the mounting surface. A rubber gasket is sandwiched in between the wired remote and the mounting surface.
- Cutout Dimensions: 2.0" (diameter) x 1.625" (deep)
- Front-Panel Dimensions: 2.375" (diameter) x 0.6875" (deep)
- Overall Dimensions: 2.375" (diameter) x 2.1875" (deep)
Note: The included hardware accommodates installations in flat panels up to 1.5" (38mm) thick.
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
3 questions already asked
Loading articles...