About the JL Audio M770-CCS-CG-WH
For outstanding sound in your boat
For outstanding sound in your boat
JL Audio built the M770-CCS-CG-WH component speakers to deliver powerful sound that'll cut through the noise when you're tearing along your favorite stretch of water. Designed to be mounted in your boat's bulkheads, these rugged speakers use marine-grade stainless steel, synthetic fibers, and UV-resistant polymer baskets to surround and protect their inner workings against humidity and salt. As an added bonus the UV protection ensures the grilles will stay white, looking factory-fresh even after years of sun exposure.
Powerful sound for your boat
Covering the highs and lows
Two 7.7" woofers deliver strong bass with stiff mica-injected polypropylene cones suspended in durable synthetic-rubber surrounds, while powerful neodymium magnets cut down on weight without affecting performance. The smooth-sounding treated silk dome tweeters disperse the high frequencies in a wide pattern for excellent stereo imaging. Surface- and flush-mount tweeter housings provide flexible mounting options.
High-quality crossover networks
High-quality 2-way crossover networks route the highs and lows to the appropriate drivers for a winning combination of clean sound quality and speaker efficiency. JL Audio attaches the crossovers to the woofer baskets, so you don't have to worry about where to mount them.
- 7.7" marine component speaker system includes two 7.7" woofers and two 1" tweeters
- injection-molded, mica-filled polypropylene woofer with synthetic rubber surround
- 1" treated silk dome tweeter
- 2-way crossover attached to the woofer basket
- UV- and corrosion-resistant Centrex polymer basket and grille
- tweeter hardware included for flush- and surface-mounts
- designed for free-air applications (no enclosures needed)
- power range: 40-100 watts RMS (175 watts peak power)
- frequency response: 45-25,000 Hz
- sensitivity: 91.0 dB
- top-mount depth: 3-3/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 91786
What's in the box:
- 2 White marine woofers with attached white polymer grilles
- 2 White marine tweeters with attached 32" speaker wire
- 12 Phillips-head stainless-steel screws (Length=1-3/8")
- 12 Stainless-steel flat washers
- 2 Surface-mount tweeter cups
- 2 Flush-mount tweeter cups
- 6 Stainless steel screws (Length=3/4")
- 2 Stainless-steel tweeter mounting springs
- 2 Machine screws (Length=1-1/4")
- Two 5" red jumper wires
- Two 5" black jumper wires
- Owner's Manual
- Mounting template
JL Audio M770-CCS-CG-WH reviews
Thanks for submitting your review
More details on the JL Audio M770-CCS-CG-WH
Features & specs
|Tweeter Design||1" Dome|
|Tweeter Composition||Treated silk|
|Woofer Composition||Mica-filled polypropylene|
|Woofer Surround||Synthetic rubber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
91 dB at 1 watt |
|Frequency Response||45 - 25k Hz|
|Max RMS Power Handling||100|
|Peak Power Handling (Watts)||175|
|Top-mount Depth (Inches)||3 1/8|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||6 1/4|
Marine Tested: JL Audio's marine speakers go through ultraviolet testing chambers (to simulate years of sun exposure) and salt fog chambers (to simulate years of exposure to salt-water environments) to assure you years of durability and high performance.
Woofers: The JL Audio M770-CCS-CG-WH Marine Component System features 7.7-inch diameter woofers that provides 20% more sound radiating area than typical 6.5-inch designs and also benefit from an oversized 1.25-inch diameter voice coil for additional power handling. The JL Audio Marine Cockpit woofers features an injection-molded, mica-filled polypropylene cone woofer with UV inhibitors, a synthetic rubber surround and a precisely engineered dust cap profile for smooth upper-end response. The woofer uses a marine-grade synthetic fiber spider with a progressive roll design and a vented motor structure with a marine grade stainless steel rear diffuser plate.
DMA (Dynamic Motor Analysis): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. The DMA-optimized long-excursion design enhances output, bass extension and power handling of the speaker.
Tweeters: The Marine Cockpit Component System features separately mounted 1" treated silk dome tweeters with a specially formulated treatment to withstand UV and salt-spray exposure. The dome tweeters use an oversized neodymium magnet for higher efficiency levels and are Ferrofluid-cooled and damped for improved response and power handling capabilities. The tweeters come supplied with surface and flush mount fixtures.
Flush Mount: Mounting Height = 0.492", Mounting Depth = 0.697", Frame Diameter = 2.382", Cutout Diameter = 1.855"
Surface Mount: Mounting Height = 1.002", Frame Diameter = 2.434", Screw Depth = 0.542"
Crossover: The JL Audio Marine Component System utilizes a true 2-way crossover network with 1st order low-pass and 2nd order high-pass circuits. The crossover network also features a polyswitch solid-state tweeter protection which prevents tweeter failures due to abuse and resets automatically. The crossovers are mounted directly to the woofer's polymer basket, requiring no additional mounting provisions.
Polymer Baskets And Grilles: The Centrex, UV-resistant polymer basket and grilles protect the component system's woofers, crossovers, motor structure and tweeters from the marine environment.
Q Crutchfield asked: Why did you buy this?