About the Scosche CFDK6 Wiring Interface
The Scosche CFDK6 wiring interface allows you to integrate a high-powered aftermarket receiver into select 1995-up Ford, Lincoln, Mercury, Mazda and Nissan vehicles with premium factory systems. The package includes the OEA-4 adapter and a Ford-specific harness. The OEA-4 unit has output-level gain controls for each of its four channels which can be adjusted to properly match the new receiver to the factory amplifier.
Note: If you haven't already, please enter your vehicle information or call a Sales Advisor at 1-888-955-6000 to find out if this adapter is compatible with your vehicle.
Details:- 4 speaker-level inputs
- output level adjustments for all four channels
- works best with high-powered aftermarket receivers
- dimensions: 3-15/16"W x 15/16"H x 2-1/16"D
- 1-year warranty
What's in the box:
Scosche CFDK6 Wiring Interface owner's manual
- OEA-4 OEM Amp interface (with 8-wire input with bare wires/8-wire output with green rectangular connector)
- Vehicle power wiring adapter (gray rectangular connector w/ 6 wires)
- Flat-blade screwdriver (attached to interface module)
- 13 Crimp caps
- Instruction sheet
Featured review
I have the '98 Eddie Bauer edition of the Ford Expedition and this was just the part I needed. I received a similar kit when I bought my radio (from Crutchfield) but it was not the right one. It seems the Eddie Bauer edition is yet another radio option beyond stock and MACH.
william from Columbus, OH
12 reasons to shop with us
#5
Free instructions &
discounted install gear
The stuff you needto do it yourself.
Reviews
Customer reviews
Loading reviews...
Scosche CFDK6 Wiring Interface reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Scosche CFDK6 Wiring Interface
Product Research
Features
Compatibility: The OEA-4 (model C4FDK6B) is a non-electronic interface that allows an aftermarket high-power stereo to integrate into select 1995 and up Ford, Lincoln, Mercury, Mazda and Nissan vehicles with premium factory systems. Please check the Crutchfield Vehicle Selector for compatibility for your vehicle.
Adjustment Gain Controls: Four rotary gain controls (front left, front right, rear left, rear right) are located recessed inside the adapter chassis. There is a small flat-blade screwdriver attached to the adapter's case, and its use is recommended. The controls are very fragile and sensitive, and a slight adjustment will change volume dramatically.
Harnesses: The adapter's input wires are approximately 5-1/2" long with bare ends. These splice to the new receiver's speaker output wires. The adapter's output wires are approximately 11" long and terminate into a green rectangular Molex plug. There is an additional gray rectangular Molex plug with 6" wires with bare ends (These 6 wires splice to the new receiver's power/ground wires). The two Molex plug ends are molded to match with factory wiring harnesses. Crimp caps are provided for wire splices.
The Scosche CFDK6 Wiring Interface replaces these items
1995-Up Ford Vehicles
- Lets you integrate a high-powered aftermarket receiver into select 1995-up Fords and other vehicles with premium factory systems
- MOSFET 45 Compatible
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
