About the Scosche FAI-1A-Nissan2
The Scosche FAI-1A-Nissan2 is a non-electronic interface that allows you to integrate a high-powered aftermarket receiver into select 1994-up Nissan vehicles with premium factory systems. The unit has output-level gain controls for each of its four channels which can be adjusted to properly match the new receiver to the factory amplifier.Details:
- 4 speaker-level inputs
- output level adjustments for all four channels
- works best with high-powered aftermarket receivers
- dimensions: 3-15/16"W x 15/16"H x 2-11/16"D
- 1-year warranty
Thanks for submitting your review
More details on the Scosche FAI-1A-Nissan2
Compatibility: The FAI-1A is a non-electronic interface that allows an aftermarket high-power stereo to integrate into select Nissan factory-amplified systems. It will also work with aftermarket low-power stereos, though output levels may have to be tuned up accordingly. Note: Please check your specific vehicle for compatibility.
Adjustment Gain Controls: Four rotary gain controls (front left, front right, rear left, rear right) are located recessed inside the adapter chassis. There is an adjustment key attached to the adapter's case, and its use is recommended. The controls are very fragile and sensitive, and a slight adjustment will change volume dramatically.
Harnesses: The input wires are approximately 6" long and have bulleted ends. The output wires are approximately 11" long and have two Molex plug ends, molded to match with factory wiring harnesses. The power leads and antenna turn-on leads bypass the adapter itself, and are connected near the Molex plug.