Contact us
Close contact box

EFX FBM8WP Fuse Holder

Weatherproof in-line mini-ANL fuse holder accepts 8- to 10-gauge wire

Item # 142FBM8WP

California customers:
Please click here for your Proposition 65 warning.

In Stock

About the EFX FBM8WP Fuse Holder

Protect yourself and your vehicle

EFX's weatherproof mini-ANL fuse holder will help protect your vehicle and power wiring in automotive, ATV, or marine applications. The housing snaps closed firmly and features cable seals that keep water and dirt out, and the electrical connection secure. Warranty: 1 year.

What's in the box:

  • Weatherproof fuse block for Mini-ANL fuses and 8/10 gauge wire
  • Two 10-gauge inserts (installed)
  • 2mm Hex wrench
  • 3mm Hex wrench
  • Four 8" Cable ties

Customer reviews

Loading reviews...

EFX FBM8WP Fuse Holder Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)



Crutchfield response

More details on the EFX FBM8WP Fuse Holder

Product Research


Overview: The Scosche EFX Mini-ANL Weatherproof Fuse Block is designed for 8 or 10 AWG power wire and Mini-ANL (or MANL) fuses. It has a molded rubber housing with integrated cable seals to keep moisture out. This allows the fuse block to be used in high moisture locations, such as ATVs and motorcycles.

Mounting: The Weatherproof Fuse Block uses Mini-ANL (or AFS) fuses (not included), which bolt to the fuse holder. The bolts have a 3mm Allen head (hex socket), and can be loosened/tightened with the supplied 3mm hex key. The wires are inserted into the ends of the fuse holder and are secured with the 2mm Allen head set screws. A 2mm hex key is included. The fuse block comes with four 8" cable ties for securing the fuse block at the mounting location.

8 AWG/10 AWG: The EFX fuse block will accept 8 AWG or 10 AWG power wire. Two inserts for 10 AWG wire are included with the fuse block. If using 8 AWG wire, the inserts should be removed.

Dimensions: The dimensions of the EFX Mini-ANL Weatherproof Fuse Block are: Length 3.495", Height 0.987" Width 0.955"

Loading accessories...

Customer Q&A

Crutchfield asked: Why did you buy this?
I needed an inline fuse holder that would fit in a 10ga wire. These fit the bill nicely. [ JOSEPH  Feb 06, 2018 ]
Needed an 8 GA fuse holder that would work well for a marine application and not the typical clear car stereo application. [ Brett  Feb 01, 2018 ]
Fuse holder is for the power wire running to the amplifier [ Keith  Apr 21, 2017 ]
because the amp requires an inline fuse holder [ rf  Aug 11, 2016 ]

Loading articles...