Scosche FD6210B Dash and Wiring Kit

Features

Vehicle compatibility: The Scosche FD6210B installation package allows you to replace your 2015-up Ford Mustang's factory radio with an aftermarket head unit, while retaining key factory features that are normally lost when removing the factory radio.

Single or Double-DIN Dash Kit w/ Automotive Grade ABS Plastic:  The Scosche FD6210B's dash kit offers automotive-grade components for seamless installation of almost any aftermarket head-unit to replace your Ford Mustang factory radio. The dash kit accommodates a single-DIN mount head unit with included pocket, or a Double-DIN mount stereo without the pocket. This dash kit has been designed with high quality automotive grade ABS plastic to match the texture, contour, and paint of your factory panels.

Notes:

• You will need to file down part of the sub-dash frame to make room for the kit to fit flush.
• Part of the sub-dash frame must be cut and removed to create space for Double-DIN radios.

Built-in LCD Touchscreen w/ AC Control: In the 2015-up Ford Mustang, the factory radio and the air conditioning controls are incorporated into one unit, making it difficult to upgrade the factory radio with an aftermarket system. The Scosche FD6210B makes is possible to upgrade to an aftermarket stereo by integrating a full-color touchscreen LCD screen & AC controller into the dash kit. The included wiring harness plugs directly into the Ford Mustang factory AC harness  without needing to cut or splice wires. Operating climate controls include:

• Climate controls (on/off)
• Temperature control (manual/dual/auto)
• Air flow/vent controls
• Fan speed (up/down)
• Air Condition (max/on/off)
• Defrost/rear defogger
• Heated/cooled seat controls

Note: You can manually adjust the brightness of LCD touchscreen, or set the brightness to a Day, Night, or Auto mode.

Steering Wheel Control Retention: The Scosche FD6210B's lets you retain your vehicle's factory steering wheel controls. The FD6210B supports Alpine, Clarion, JVC, Kenwood, Pioneer, and Sony aftermarket radios with a steering wheel control input. You will need to indicate what brand of aftermarket radio you have through the dash kit's LCD touchscreen interface.

Retained Factory Aux Input: The FD6210B provides retention of your vehicle's factory Aux input. To retain the vehicle's factory Aux input, your aftermarket head unit must have a rear-panel Aux input (male mini-to-female stereo RCA adapter may be required, sold separately).

Factory Backup Camera Retention: The Scosche FD6210B retains your vehicle's factory backup camera through its composite video jack and your aftermarket radio's camera input.

Navigation Outputs: The Scosche FD6210B provides wired outputs for navigation radio installation; including a VSS (vehicle speed sense), Parking Brake, and a Reverse Gear output to make installing an aftermarket navigation head unit simpler and less time consuming.

Wiring Harness: The included wiring harness contains the following bare wire leads which will need to be hardwired to your aftermarket radio and vehicle.