88 Dodge Ram 50
Jason from Saint George, UT on 6/4/2018
1988 Dodge Ram 50
Works alright, but had to do some adjusting. Stereo is in, so I guess you could say it worked. I've used other Scosche kits in other vehicles, and they worked perfectly
Pros: Looks good, and fit almost perfectly...
Cons: It was made for to many different vehicles, so the instructions were not clear enough about exactly which tabs to eliminate. Instructions need to be more clearly written. Also, you can't tighten the stereo in tight enough, because the kit is to wide.
0 of 0 found this helpful
GEN 1 Raider / Montero...not so much.
Charles from LONGMONT, CO on 2/10/2018
2005 Honda Accord EX
GEN 1 Raider (same as Montero). I agree with "Anonymous from Bellevue, WA" below. Followed the (barely readable) directions (rare for me). Talked to Support. Parts broke. Tried to customize to get it to fit. Suffered hot plastic flung around by my Dremel. Made up new bad words. Fortunately, I had a spare cubby to fill in the blank space instead of the non-functional plate. Buy the kit, don't open it, try to make the stock setup work, send the kit back (if they do that, I don't know).
Pros: None
Cons: DIdn't work at all.
0 of 0 found this helpful
Works well
Gary from SD on 7/30/2017
1994 Mitsubishi 3000GT
It is what it says it is.. went together well..
Pros: Fits like it should
Cons: Seems cheaply put together
0 of 0 found this helpful
Scosche MI2010B Dash Kit
Crutchfield customer from Bellevue, WA on 11/27/2016
1989 Mitsubishi Montero
Gen 1 Montero - if you are using the existing metal cage to install a new radio, you will not need this kit. I went from the stock radio and tape deck to a new single DIN radio and single DIN storage, which installed into the stock metal cage, direct fit, no mods needed. Wish I'd known, just to save Crutchfield the trouble.
Pros:
Cons:
1 of 1 found this helpful
Stealth install
Brett from Findlay, ohio on 7/18/2016
1993 Dodge Stealth
I could not use any of the adapter plates for my stealth. I ended up modifying existing brackets to get the dimensions right to use the trim ring that came with the head unit. Also ordered a cubby hole for under unit providing much needed extra storage space in the dash.
Pros: I couldn't use the product. It was money wasted.
Cons: These plates did not work with the head unit I installed and would not have trimmed out as well as what I ended up with.
0 of 0 found this helpful
Overall pretty simple, very good product!
96benson from Minnesota on 12/27/2015
1993 Mitsubishi 3000GT
Item included very detailed instructions for assembly on different makes and models. They had every model for Mitsubishi and Chrysler except the Mitsubishi 3000gt I have! But other than that, it was very organized for install, easy to read instructions, and included every part you may need, or may not need in my case...
Pros: Very detailed instructions made it easy to assemble, included many pieces
Cons: Listed for Mitsubishi and Chrysler '80s and 90's, but didn't have the 3000gt version
2 of 2 found this helpful