About the Scosche MZ08SR Wiring Interface

Scosche MZ08SR
You want to upgrade the radio in your 2012-14 Mercedes-Benz C-Class, but you don't want to lose those handy steering wheel audio controls. This MZ08SR interface from Scosche retains your steering wheel controls, along with all warning and safety chimes. It also provides the 12-volt switched accessory output (which was absent from the factory harness), as well as providing the connections you'll need to install a navigation receiver, including reverse, speed pulse, and parking brake. Warranty: 1 year.
What's in the box:
Scosche MZ08SR Wiring Interface owner's manual
- Radio replacement interface module
- Wiring harness (inline 15A fuse)
- SWC harness
- Installation Instructions
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Scosche MZ08SR Wiring Interface

Product Research
Features
Vehicle Compatibility: Vehicle Compatibility: The Scosche MZ08SR radio replacement interface module is designed specifically for 2012-2014 Mercedes C Class vehicles.
+12V Accessory Output: In these Mercedes vehicles, there is no 12-volt accessory wire in the factory harness, which would require the installer to run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. However, the MZ08SR is designed to provide a +12V accessory switched accessory output to make installation a lot simpler.
Steering Wheel Controls: The MZ08SR allows you to keep your vehicle's factory steering wheel controls when replacing the factory radio with an aftermarket head unit that features a SWC input. No additional interface or programming is necessary.
Navigation Outputs: The MZ08SR provides navigation outputs for reverse, vehicle speed pulse, and parking brake - making installation of aftermarket navigation receivers much simpler and less time consuming.
Wiring Color Chart: The following wires of the included wiring harness will need to be hardwired to your new aftermarket stereo's harness.
16-Pin Harness | |
Yellow (w/ inline 15A fuse) | Permanent 12V Supply |
Black | Ground |
Blue (x 2) | +12V Power Antenna |
White | Left Front Speaker + |
White/black | Left Front Speaker - |
Gray | Right Front Speaker + |
Gray/black | Right Front Speaker - |
Green | Left Rear Speaker + |
Green/black | Left Rear Speaker - |
Purple | Right Rear Speaker + |
Purple/black | Right Rear Speaker - |
14-Pin Harness | |
Yellow | +12 Volt Constant |
Red | +12 Volt Accessory |
Black | Ground |
Orange | Illumination Output (+) |
Green | Parking Brake (-) |
Purple/white | Reverse Output (+) |
Pink | VSS (Vehicle Speed Sense) |
12-Pin Harness | |
Male 3.5mm Connector | SWC Connector |
Brown | SWC Key 1 |
Gray | SWC Key 2 |
Black | SWC Ground |
Loading accessories...
Customer Q&A
Loading articles...