About the EFX 4-gauge Amplifier Wiring Kit
This wiring kit does not include speaker wire, so you'll need to purchase that separately to complete your amp installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.
Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.
This wiring kit from EFX includes 4-gauge power and ground cables, 17' Stereo RCA interconnect cable, space-saving mini wafer fuse holder and fuse, and all the accessories you'll need to connect your new amp. Just add whatever speaker wire you need, and you're ready to go. Designed for amplifiers with a fuse rating of up to 100 amperes.
Product highlights:
- amplifier wiring kit with power, ground, and audio connections
- 17-foot blue 4-gauge power cable
- 4-foot silver 4-gauge ground cable
- 17-foot blue remote turn-on lead
- 17' Stereo RCA interconnect cable
- 100-amp mini wafer in-line fuse and fuse holder
- 6 feet of flex loom
- assorted crimp-on connectors and wire ties
- warranty: 1 year (no warranty on fuses)
- Our 60-day money-back guarantee
- MFR # 142PA41
What's in the box:
EFX 4-gauge Amplifier Wiring Kit owner's manual
- 17' Stereo RCA interconnect cable
- 16' Four-gauge blue power cable (installed on amp side of fuse holder)
- 1' Four-gauge blue power cable with ring terminal (installed on battery side of fuse holder)
- Waterproof in-line fuse holder
- 100-amp AFS mini wafer fuse
- 2 Mounting screws (for the in-line fuse holder)
- 4' Four-gauge silver ground cable with ring terminal on one end
- 17' Eighteen-gauge blue remote turn-on wire
- 6' Length of flex loom
- 6 Plastic wire ties
- Two 4-gauge crimp-on spade connectors (one red/one black)
- 2 Red 18-gauge crimp-on spade connectors
- 1 Plastic grommet
- 2 Red butt connectors
- "Scosche" sticker
- Instructions
Reviews
Customer reviews
Loading reviews...
EFX 4-gauge Amplifier Wiring Kit reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the EFX 4-gauge Amplifier Wiring Kit

Product Research
Features
Compatibility: The PA41 kit is designed for amplifiers with fuse ratings up to 100 amps.
Kit Contents:
- 17-ft Stereo RCA interconnect cable
- Waterproof in-line fuse holder with 4-gauge power cable attached (width: 3.230", height: 1.082", depth: 1.959")
- 100-amp AFS mini wafer fuse
- 1-ft 4-gauge blue power cable, one end attached to fuse holder, the other end has a ring terminal (0.655" outer diameter, 0.315" inner diameter)
- 16-ft 4-gauge blue power cable, one end attached to fuse holder
- 4-ft 4-gauge silver ground cable with ring terminal on one end (0.655" outer diameter, 0.315" inner diameter)
- 17-ft 18-gauge blue remote turn-on wire
- 6-ft length of flex loom (0.561" diameter)
- 6 Plastic wire ties (zip ties, 7-3/4" long)
- Two 4-gauge crimp-on spade connectors, one with a red insulator boot for power and one with a black insulator boot for ground (0.367" outer width, 0.216" inner width)
- Two 18-gauge crimp-on spade connector with red insulator boots (0.257" outer width, 0.168" inner width)
- 1 Plastic grommet
- 2 Red butt connector
- Two 1/2" Mounting screws for the waterproof in-line fuse holder
- Scosche sticker
- Instructions
Note: All power cables have Oxygen-free high-conductivity wire for maximum power flow.
The EFX 4-gauge Amplifier Wiring Kit replaces these items
Loading accessories...
Customer Q&A
Loading articles...