Contact us
Close contact box

Sennheiser CH 650 S

Balanced cable for Sennheiser HD 650/HD 600 headphones

Item # 143CH650S

Sennheiser has developed the ideal link between two of its best-sounding headphones and their high-performance...

Read more from Crutchfield writer, David B.

California customers:
Please click here for your Proposition 65 warning.

This item is no longer available.

About the Sennheiser CH 650 S

Make a strong connection with Sennheiser

Sennheiser has developed the ideal link between two of its best-sounding headphones and their high-performance headphone amplifiers. The CH 650 S is a high-quality balanced cable designed for the HD 650 and HD 600 headphones. Replace the stock cable with the CH 650 S and connect it to the Sennheiser HDVD 800 or HDVA 600 to open up a world of audiophile delights for your ears to revel in.

Make a strong connection with Sennheiser

Sennheiser has developed the ideal link between two of its best-sounding headphones and their high-performance headphone amplifiers. The CH 650 S is a high-quality balanced cable designed for the HD 650 and HD 600 headphones. Replace the stock cable with the CH 650 S and connect it to the Sennheiser HDVD 800 or HDVA 600 to open up a world of audiophile delights for your ears to revel in.

This cable's four-pole XLR plug preserves the symmetrical signal flow from your Sennheiser amp through two pairs of oxygen-free copper leads all the way to the independent left- and right-earcup connectors. This results in very precise signal transmission with almost no distortion, so you can maximize the sonic potential of your headphones and amplifier. You'll enjoy clean, wide-open sound with fine detail shining through and virtually no noise.

READ LESS

Product highlights:

  • balanced headphone cable with 4-pole XLR connector
  • left- and right-channel 2-pin mini-connectors designed for connection to the Sennheiser HD 650 and HD 600 headphones
  • allow balanced connection to the Sennheiser HDVA 600 and HDVD 800 headphone amplifiers
  • two pairs of oxygen-free copper straight leads maintain a symmetrical signal flow to each channel
  • gold-plated contacts
  • length: 9.8 feet (3 meters)
  • weight: 3.4 oz.
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # 505634
KEEP READINGREAD LESS

What's in the box:

  • 10' (3 meter) Headphone cable for HD 650 and HD 600 headphones (with left and right 2-pin connectors on one end and one XLR-4 connector on the other end)

Customer reviews

Loading reviews...

Sennheiser CH 650 S Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Sennheiser CH 650 S

Product Research

Features

Overview: The Sennheiser CH 650 S is a high-end cable for the HD 650 and HD 600 audiophile-grade headphones. It is 10' (3 meters) long, with left and right 2-pin connectors on one end and a single XLR-4 connector on the other end. The jacket is made of a high-quality, low-friction material to minimize friction and distortion picked up through cable contact.

Matched: The CH 650 S is optimally matched to Sennheiser's HDVD 800 and HDVA 600 headphone amplifiers. These headphone amps have XLR-4 output jacks to accommodate this cable.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
A safe secure choice for Sennheiser headphones [ Vince  Feb 22, 2018 ]

1 question already asked

Q
Can the balanced sennheiser hd650 s replacement cable be used with any balanced amplifier with 4 pin xlr jacks, or just with the Sennheiser balanced amplifiers?
[ Lanny  Mar 13, 2016 ]
3 answers
A
The ends that go into the headphones are obviously for the Sennheiser. The other end is generic should work with standard XLR jacks. Hope that helps.
[ SAI  Apr 02, 2016 ]
A
It can be used with any balanced 4-pin amplifier.
[ Jay  Mar 15, 2016 ]
A
Yes, it's possible if the amplifier comes with 4 pin XLR jacks.
[ Rosmadi  Mar 15, 2016 ]  Works for Sennheiser

Loading articles...

TOP