About the Sennheiser e 614
Highly accurate sound reproduction
The compact Sennheiser e 614 condenser mic delivers accurate, transparent sound thanks to its fast transient response and wide, flat frequency response from 40 to 20,000 Hz. It can handle extremely high sound pressure levels, so you can use the e 614 to close-mike your instrument. It's great for close-miking hi-hat cymbals, or hung over a drum kit to pick up crash and ride cymbals. The e 614 can be used for overhead ensemble recording, and miking woodwind and string instruments. Its acoustic properties also make it a good general-purpose home studio mic.
- overhead and general-purpose condenser microphone
- supercardioid polar pattern
- rugged metal body
- frequency response: 40-20,000 Hz
- output impedance: 50 ohms
- sensitivity: 3mBV/Pa
- max. SPL: 139 dB/SPL
- 3-15/16" length x 3/4" diameter
- weight: 3.28 oz.
- XLR connector
- requires phantom power (12 to 52V) on your mixer or audio interface
- microphone pouch
- microphone clip
- warranty: 10 years
- Our 60-day money-back guarantee
- MFR # 009895
What's in the box:
- Stand adapter
- Nylon carry-pouch
- Instruction manual (Eng / Span / Fren / Others)
Thanks for submitting your review
More details on the Sennheiser e 614
Features & specs
|Application||For live & studio use|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Overview: The Sennheiser E614 is a supercardioid condenser microphone, designed for demanding instrument recordings and performances that require extended frequency response, high SPL handling, fast transient response and compact size. The E614 is most ideal for overhead drum miking, but works exceptionally well on percussion setups as well as woodwinds and strings. It has a nearly flat frequency response from 40Hz to 20kHz, allowing it to capture the shimmer and contact of sticks, mallets, and hands. The E614 can handle high SPLs and features medium sensitivity, which helps reduce bleed from other instruments on stage.
Polar Pattern: The E614 has a supercardioid polar pattern, which has maximum sound pickup directly in front of it with slightly less from the rear, and very little pickup from the sides of the mic, which helps it reject sound from stage monitors.
Connection: The E614 provides a balanced output on a standard male, 3-pin XLR connector.
Phantom Power: The E614 uses a condenser type transducer that operates on phantom power sources ranging from 12 - 52V / 3mA.
Stand Mount: The included stand mount for the E614 allows approximately 180˚ of tilt and has a 3/8" threaded socket.
- Transducer Type: Condenser
- Pick-up Pattern: Supercardioid
- Frequency Response: 40Hz - 20kHz
- Sensitivity: 3.0 mV/Pa
- Maximum SPL: 139 dB
- Nominal Impedance: 50Ω
- Min. Terminating Impedance: 1000 Ω
- Phantom Power: 12 - 52V / 3mA
- Connector: 3-Pin male XLR
- Length: 3.91"
- Diameter: 0.79"
- Weight: 3.28 oz.