About the Sennheiser e 902
Made for bass
Made for bass
The Sennheiser e 902 was designed to capture the lowest frequencies cleanly and accurately. It's great for miking kick drums, bass guitar cabs, tubas, and other low-pitched instruments. The mic features a built-in stand adapter to minimize space requirements, so you can use the e 902 in hard-to-reach spaces.
Quality construction for optimal performance
The e 902 features a humbucking design that cancels out unwanted low-frequency hum and electronic noise. And the lightweight, high-performance voice coil ensures fast transient response, for clear sound reproduction. A cardioid polar pattern minimizes incidental rear noise, regardless of pitch.
- dynamic microphone
- designed for low-frequency instruments like drums, bass, and tuba
- cardioid polar pattern
- humbucking coil to cancel interference and hum
- rugged metal body
- fast transient response
- low frequency extension
- integrated stand mount
- frequency response: 20-16,000 Hz
- output impedance: 350 ohms
- sensitivity: 0.6mV/Pa
- height: 5-1/16"; diameter: 2-3/8"
- weight: 15.5 oz.
- XLR connector
- microphone pouch
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 500199
What's in the box:
- Stand mount (attached to mic)
- Nylon carry-pouch
- Instruction manual (Eng / Span / Fren / Others)
Thanks for submitting your review
More details on the Sennheiser e 902
Features & specs
|Application||For live & studio use|
|Max SPL||Not given|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Overview: The Sennheiser E902 is a dynamic microphone with a cardioid pattern, designed especially for bass frequency instruments such as kick drums, bass guitar amps, and brass instruments. It has a tailored frequency response that emphasizes the low and high frequencies with a cut in the midrange. Other features include a fast transient response, shock-mounted capsule, hum compensating coil, an integrated stand mount, and a robust metal body.
Polar Pattern: The E902 has a cardioid polar pattern, which has maximum sound pickup directly in front of it, slightly less pickup from the sides, and no pickup from the rear of the mic.
Connection: The E902 provides a balanced output on a standard male, 3-pin XLR connector.
Stand Mount: The integrated stand mount on the E902 allows approx. 180˚ of tilt and has a 3/8" threaded socket.
- Transducer Type: Dynamic
- Pick-up Pattern: Cardioid
- Frequency Response: 40 Hz - 16 kHz
- @ 1 kHz: 0.2 mV/Pa
- @ 60 Hz: 0.6 mV/Pa
- Nominal Impedance: 350 Ohm
- Min. Terminating Impedance: 1000 Ohms
- Connector: 3-Pin XLR
- Length: 5.059"
- Diameter: 2.362"
- Weight: 15.521 oz.